Hi all,
I have a SR2 Board with a problem...
I have 2 identical X5660's , they both work fine in socket 0
I have 2 Hynix 4gb 2Rx8 PC3-10600r DIMMS, they both work fine for CPU 0
I have a perfect PSU for it : EVGA NEX1500 Classified
Bios = A58, CMOS = reset.
I visually inspected the board , everything looks ok
Now, everything works fine with one CPU in CPU socket 0 and CPU socket 1 = empty (bios does post and boot)
If i put a CPU in socket 1 , start , the PSU turns on, chipset fan runs, but no beeps , no display numbers , nothing.
Disabeling the CPU1 in with jumper does not make it run, i have to physically remove the CPU from CPU1 Socket to post and boot.
Any clues ? Anything that i can check with a multimeter ?
Thanks !
post edited by Ro Derrick - 2018/02/23 09:14:12