EVGA

Razer tiamat 7.1 v2 connecting to Evga Nu Pro

Author
Post
Essentials Only Full Version
Spirit_Rises
Superclocked Member
  • Total Posts : 242
  • Reward points : 0
  • Joined: 2014/02/02 06:32:41
  • Status: offline
  • Ribbons : 1
2021/03/31 03:46:05 (permalink)
Hi guys, i was deciding to buy tiamat 7.1 v2 true headset and i was wondering if the Evga Nu pro is suitable for that headset? Where should i connect the front channel 3.5mm connection on the Evga Nu pro? Side , rear , c/sub connections can easily be connected to the related ports on the surround Evga Nu pro card but what about the front channel 3.5mm connection on the headset? Where should i plug in that front channel 3.5mm jack ?
#1

3 Replies Related Threads
    Vivicector
    New Member
    • Total Posts : 70
    • Reward points : 0
    • Joined: 2020/02/18 20:59:28
    • Status: offline
    • Ribbons : 1
    Re: Razer tiamat 7.1 v2 connecting to Evga Nu Pro 2021/03/31 05:13:39 (permalink)
    Hi! You should put those into the front out on the main nu audio pro board. There is an adapter 2*RCA to 3,5MM Jack supplied with the card. So you make those 2*RCA into a 3,5Jack and plug in your Tiamat as 7.1 Surround system. You will have to connect Speakers into mic out then. This way you may switch between Headphones/speakers on the fly.
    Or you can go for the headphones out, but that would make it more weird if you have Speakers too, you'll have to turn the audio devices off/on.
     
    Beware about the Subwoofer problem since Tiamat don't have a freq filter. Nu audio will translate all the audio into sub as well. Bad design. Some workarounds do exist though.
     
    #2
    Spirit_Rises
    Superclocked Member
    • Total Posts : 242
    • Reward points : 0
    • Joined: 2014/02/02 06:32:41
    • Status: offline
    • Ribbons : 1
    Re: Razer tiamat 7.1 v2 connecting to Evga Nu Pro 2021/03/31 11:12:51 (permalink)
    Vivicector
    Hi! You should put those into the front out on the main nu audio pro board. There is an adapter 2*RCA to 3,5MM Jack supplied with the card. So you make those 2*RCA into a 3,5Jack and plug in your Tiamat as 7.1 Surround system. You will have to connect Speakers into mic out then. This way you may switch between Headphones/speakers on the fly.
    Or you can go for the headphones out, but that would make it more weird if you have Speakers too, you'll have to turn the audio devices off/on.
     
    Beware about the Subwoofer problem since Tiamat don't have a freq filter. Nu audio will translate all the audio into sub as well. Bad design. Some workarounds do exist though.
     


    Does Nu audio provide lfe / crossover / bass management settings? If not this will cause issue for waking up the sun woofer of the tiamat right?
    #3
    Vivicector
    New Member
    • Total Posts : 70
    • Reward points : 0
    • Joined: 2020/02/18 20:59:28
    • Status: offline
    • Ribbons : 1
    Re: Razer tiamat 7.1 v2 connecting to Evga Nu Pro 2021/03/31 20:09:09 (permalink)
    Spirit_Rises
    Does Nu audio provide lfe / crossover / bass management settings? If not this will cause issue for waking up the sun woofer of the tiamat right?

    Nope, it doesn't. There are workarounds though, check the forum.
    #4
    Jump to:
  • Back to Mobile