Hi,

Does anyone have any idea, even roughly what the length of the FTW3 will be ? This card is currently at the top of my list. I have a meshify c case and limited to 310mm length at the moment.

Thanks !

I’ve just had a reply on Reddit which I think list have been posted in the sticky thread about all the dimensions. I think it’s 300mm.

From the main launch thread...
 

EVGATech_LeeM
Also, to answer about half the questions in this thread:

• Currently no pre-order planned.  Similarly, no pricing is available at this time.
• Like the US store, we cannot generally comment on availability at this time for the EU store.  Availability, however, will not be any sooner than the dates NVIDIA mentioned for each GPU.
• HYBRID, HC, and KPE cards will come a bit later than the XC3 and FTW3 cards.  No ETA to give you, which is probably your next question.
• HYBRIDs will be 240mm, except for KPE HYBRID, whch will be 360mm.  No plans for a 120mm HYBRID at this time.
• HYBRIDs will be 2 Slot.
• XC3 cards will all be 2.2 slots.  Length is 11.23in. - 285.37mm / Height is 4.38in. - 111.15 mm.
• FTW3 cards will be 2.75 slots.  Length is 11.81in. - 300mm / Height is 5.38in. - 136.75mm.
• There will be an EVGA NVLINK.  No ETA at this time.
• Since I've seen this mentioned incorrectly, all cards are 3 DisplayPort, 1 HDMI.
• PowerLink is expected to work with the XC3 models.  For obvious reasons, it will not work with the 3090/3080 FTW3 cards due to the number of PCIe power connectors.  Either way, we will have the compatibility list updated when the cards are available on the website.
• Step-Up will begin when cards are available.  Products will not be listed prior to general availability.  I would expect one of the XC3 models will be listed for availability, but we will make that decision prior to general availability.
• I'm not sure why people assume bots are buying cards over regular people.  It was a popular reason for why 20-Series cards were always out of stock, which completely ignored literal supply and demand issues (lots of people wanted them, but there weren't many initially).  Yes, there are per person quantity caps for each card.  Yes, we require captcha to login, which is also required to create a profile.  This should help to comfort some of you.

 
However, I also have a Meshify C and am curious about the overall PCB length, and compatibility with the NZXT G12. I'd rather get a FTW3 at launch and install my own AIO and fans rather than wait for the Hybrid.
 
The challenge is that with both a CPU and GPU AIO you'll need two radiators (in my case I'm planning two 240mm radiators), so there's no avoiding a front mounted radiator which is typically 30mm thick. The Meshify C specs state a max GPU length of 315mm, but that does not include a radiator, bringing it down to 285mm. Using a 15mm low profile fan can add an extra 10mm, bringing it to 295mm.
 
One option if you're concerned about length is to employ this case modification used by Bitwit in this build ( ), where he cuts out a portion of the plastic scaffolding behind the shroud and then mounts the fans in front of the mounting bracket. Obviously that's a last resort option.
 
Edit: Apparently the link I posted to Bitwit's video is removed, but if you google "Bitwit Meshify C modification" you'll find it. The video is titled "*Another* EPIC Build Montage!!"

For those wondering: No, a 3080 FTW3 does not fit in a Meshify C case with a front mounted radiator.
 
Was very lucky and managed to get a 3080 FTW3 Ultra, but had to move the radiator to the top. No big deal. For liquid cooling via AIO, a different case will likely be needed. If you intend to purchase a Hybrid FTW3, be warned regarding case space.

Is it known what the 3090 FTW3 Ultra's PCB length is? (just the PCB, not the full card with cooler etc)

Trying to gauge if it would fit my O11DXL with a waterblock, vertically-mounted - main problem being that I have a Heatkiller reservoir/tube mounted on the side rad that may make things difficult.