d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Guys I have a really dumb question here, but I am struggling with it.
Can anyone clarify the proper way to save, and delete, a profile from the number column on that right hand panel?
It was so easy for me in PXOC, but I have trouble with PX1.
And also, how to tell which slots have a profile - and ideally which profile? Didn't we use to be able to hover the mouse over a profile in previous version and it show the profile setting?
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Question on Precision X1 Profiles?
2018/10/28 15:35:03
(permalink)
Good Luck, nothing I do now works and I am using 3.3.3. I will wait till a few weeks.
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Question on Precision X1 Profiles?
2018/10/28 15:44:46
(permalink)
bcavnaugh
Good Luck, nothing I do now works and I am using 3.3.3. I will wait till a few weeks.
Ah so it is not just me... Thanks, thought I was losing it lol.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bob16314
CLASSIFIED ULTRA Member
- Total Posts : 7859
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: Question on Precision X1 Profiles?
2018/10/28 15:55:00
(permalink)
After the desired settings are applied, left-click on a Profile number, then click Save..Done..Right-clicking on a Profile number deletes the Profile. Load a Profile by left-clicking on the number, then click Load..Or..Set up a hotkey or hotkey combo. Advise you to close PX1 and open it again after creating a Profile or changing any settings whatsoever, otherwise some things won't stick. Tool Tips may need enabled to hover over items to see what's in the Profile..Tool Tips don't work for me, I assume because GTX cards aren't fully supported, so it may not even tell you what's in the Profile like PXOC did, I don't know..You could right-click the PX1 icon in the System Tray and see if it shows Profiles like PXOC did..I just noticed there's a 'Show profile in tray menu' you can enable. Saving/Loading Profiles in PX1 v0.3.3 Beta works fine here though.
post edited by bob16314 - 2018/10/28 15:57:02
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Question on Precision X1 Profiles?
2018/10/28 17:03:56
(permalink)
bob16314
After the desired settings are applied, left-click on a Profile number, then click Save..Done..Right-clicking on a Profile number deletes the Profile.
Load a Profile by left-clicking on the number, then click Load..Or..Set up a hotkey or hotkey combo.
Advise you to close PX1 and open it again after creating a Profile or changing any settings whatsoever, otherwise some things won't stick.
Tool Tips may need enabled to hover over items to see what's in the Profile..Tool Tips don't work for me, I assume because GTX cards aren't fully supported, so it may not even tell you what's in the Profile like PXOC did, I don't know..You could right-click the PX1 icon in the System Tray and see if it shows Profiles like PXOC did..I just noticed there's a 'Show profile in tray menu' you can enable.
Saving/Loading Profiles in PX1 v0.3.3 Beta works fine here though.
Ok thanks, just successfully made a new profile with custom fan curve and saved it to my number 0 slot. Also deleted one. At least it worked this time lol. Tool tips are not working for me either, can not enable in the settings - also right clicking on tray icon just brings PX1 back up on monitor if minimized. No way to see profile settings that I can find yet. Perhaps that is yet to be implemented. Thanks much!
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
DavidO
EVGA Alumni
- Total Posts : 163
- Reward points : 0
- Joined: 2018/04/19 13:59:30
- Status: offline
- Ribbons : 2
Re: Question on Precision X1 Profiles?
2018/10/28 17:50:26
(permalink)
bob16314
After the desired settings are applied, left-click on a Profile number, then click Save..Done..Right-clicking on a Profile number deletes the Profile.
Load a Profile by left-clicking on the number, then click Load..Or..Set up a hotkey or hotkey combo.
Advise you to close PX1 and open it again after creating a Profile or changing any settings whatsoever, otherwise some things won't stick.
Tool Tips may need enabled to hover over items to see what's in the Profile..Tool Tips don't work for me, I assume because GTX cards aren't fully supported, so it may not even tell you what's in the Profile like PXOC did, I don't know..You could right-click the PX1 icon in the System Tray and see if it shows Profiles like PXOC did..I just noticed there's a 'Show profile in tray menu' you can enable.
Saving/Loading Profiles in PX1 v0.3.3 Beta works fine here though.
This is correct to the extend of setting and deleting profiles and loading them. You should not need to close the program itself to insure that the settings save. Don't rush through the steps of setting profiles so you can see when they to save your setting on that profile. When a profile is set it will be highlighted in purple to show that the profile number has a saved setting, when selecting the profile the number will highlight in purple to show you what is detected. Please keep in mind X1 is still beta, there will be issues here and there.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Question on Precision X1 Profiles?
2018/10/28 18:22:32
(permalink)
PX1 v0.3.3 Beta worked fine and I even saved 9 Profiles. https://forums.evga.com/FindPost/2873481Then I ran Scan - Apply - Save and now I cannot save Profiles that work. For some reason I can Break the Chain and set the Target to 130. After restart it locks the chain link set to mid range reset the fans and breaks the Chain Link. The only version that has a Color Box under LED is EVGA_Precision_X1_0.3.3.1_BETA.exeThe Color Box is missing from all other versions.
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Question on Precision X1 Profiles?
2018/10/29 02:12:51
(permalink)
EVGATech_DavidO
bob16314
After the desired settings are applied, left-click on a Profile number, then click Save..Done..Right-clicking on a Profile number deletes the Profile.
Load a Profile by left-clicking on the number, then click Load..Or..Set up a hotkey or hotkey combo.
Advise you to close PX1 and open it again after creating a Profile or changing any settings whatsoever, otherwise some things won't stick.
Tool Tips may need enabled to hover over items to see what's in the Profile..Tool Tips don't work for me, I assume because GTX cards aren't fully supported, so it may not even tell you what's in the Profile like PXOC did, I don't know..You could right-click the PX1 icon in the System Tray and see if it shows Profiles like PXOC did..I just noticed there's a 'Show profile in tray menu' you can enable.
Saving/Loading Profiles in PX1 v0.3.3 Beta works fine here though.
This is correct to the extend of setting and deleting profiles and loading them. You should not need to close the program itself to insure that the settings save. Don't rush through the steps of setting profiles so you can see when they to save your setting on that profile. When a profile is set it will be highlighted in purple to show that the profile number has a saved setting, when selecting the profile the number will highlight in purple to show you what is detected. Please keep in mind X1 is still beta, there will be issues here and there.
Just a suggestion David - you should consider having the colors in a profile selected versus a profile saved to be different. Both currently are that soft purple. I have trouble distinguishing say which one is a saved profile slot, and which one is just a slot number I had clicked on and it became selected, profile in it or not. Plus the skin is kind of dark anyway, and that purple is as well.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Question on Precision X1 Profiles?
2018/10/29 11:25:19
(permalink)
Testing out 0.3.4 to see of Profile Saves are fixed.
post edited by bcavnaugh - 2018/10/29 12:46:29
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Question on Precision X1 Profiles?
2018/10/29 11:29:14
(permalink)
bcavnaugh
Testing out 3.3.4 to see of Profile Saves are fixed.
Looking forward to hearing your thoughts, I am staying away from profiles for now at least.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Question on Precision X1 Profiles?
2018/10/29 12:47:04
(permalink)
d.burnette
bcavnaugh
Testing out 3.3.4 to see of Profile Saves are fixed.
Looking forward to hearing your thoughts, I am staying away from profiles for now at least.
Typo on the Number, it is 0.3.4
|