EVGA

Helpful ReplyHot!Px1 1.20 version is out

Page: 12 > Showing page 1 of 2
Author
dc8flyer
SSC Member
  • Total Posts : 532
  • Reward points : 0
  • Joined: 2016/02/23 00:10:47
  • Status: offline
  • Ribbons : 7
2021/05/13 11:26:54 (permalink)

2009 Alienware Aurora x58
i7 990x oc to 4.14
Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors
RTX 2080ti EVGA Black XC oc 1250/160 with 456.55
CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory
2TB 860evo SSD
Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler
Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow
Windows 10 - always the latest
#1
darklord2021
Superclocked Member
  • Total Posts : 104
  • Reward points : 0
  • Joined: 2021/02/09 12:24:52
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/13 15:00:06 (permalink)
who want to try it and let us know how it goes?
#2
Koithim
Superclocked Member
  • Total Posts : 136
  • Reward points : 0
  • Joined: 2017/03/14 18:24:49
  • Location: Canada
  • Status: offline
  • Ribbons : 2
Re: Px1 1.20 version is out 2021/05/13 16:00:56 (permalink)
So far so good for me.  Just had to uninstall Precision, was getting a driver error when trying to install over.
 
Cheers!
post edited by Koithim - 2021/05/13 16:02:06

CASE: EVGA DG-87 COOL: ASUS Ryujin 360
PSU: EVGA SuperNOVA 1000 T2 MOBO: ROG Maximus XI Extreme
CPU: i9-9900k @ 5.0 GHz 4x8GB G.skill Trident Royal ddr4-4000
SSD: Samsung 960 Pro 512GB PCIe M.2
EVGA GeForce RTX 3090 FTW3 ULTRA
Display: Asus PG279Q Windows 10 pro 2004

 
 
#3
DaBogo
New Member
  • Total Posts : 38
  • Reward points : 0
  • Joined: 2020/07/24 02:31:12
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/13 16:15:23 (permalink)
Evga 3080 FTW3 Ultra with XOC Bios - i tried first to upgrade than i deinstalled the 1.1.9.0 and installed 1.1.2.0 but the only thing what i can tell is different - the X1 Version number. Nothing changed for me, really. I will try with a power off the pc and see what is happening but just reinstalling nothing changed.
#4
dc8flyer
SSC Member
  • Total Posts : 532
  • Reward points : 0
  • Joined: 2016/02/23 00:10:47
  • Status: offline
  • Ribbons : 7
Re: Px1 1.20 version is out 2021/05/13 16:46:45 (permalink)
Works just fine, no issues.
 
2080ti Memory clock at 1200, GPU Clock at 160, voltage 100, Target Power 120 GPU temp limited to 80.
 
Only changes listed were:
 
Release: 5/13/2021
  • Default fan speed will be set to 33% when auto mode is disabled.
  • In Fan AUTO Mode, TextBox & Slider is disabled and now shows "AUTO" in TextBox
  • All NVML.dll search paths are included to fix Resizable BAR detect fail issue.

2009 Alienware Aurora x58
i7 990x oc to 4.14
Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors
RTX 2080ti EVGA Black XC oc 1250/160 with 456.55
CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory
2TB 860evo SSD
Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler
Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow
Windows 10 - always the latest
#5
AstroCat
New Member
  • Total Posts : 42
  • Reward points : 0
  • Joined: 2007/07/19 15:39:16
  • Status: offline
  • Ribbons : 1
Re: Px1 1.20 version is out 2021/05/13 16:48:39 (permalink) ☄ Helpfulby Cool GTX 2021/05/17 10:22:10
Clean install...
  • All NVML.dll search paths are included to fix Resizable BAR detect fail issue.
Does not fix this issue for me. Before the last version it was enabled, now it's not. Nothing changed on my end and Nvidia CP says it is enabled.
 
I also see an error window for NVML.dll flash for a moment as the app launches.
My NVML.dll file is located here: C:\Program Files\NVIDIA Corporation\NVSMI\nvml.dll
 
So for sure still broke, any fix?
 
UPDATE: Ok, I fixed it. I had to manually copy NVML.dll file from: C:\Program Files\NVIDIA Corporation\NVSMI\ to C:\Windows\System32

Then when I relaunched X1 rebar is enabled.
 
 
 
post edited by AstroCat - 2021/05/14 06:07:57

Attached Image(s)


 i7-10700K /Asus ROG Maximus XII Hero/EVGA RTX 3080 Ti FTW3 ULTRA/G.SKILL 32GB  Ripjaws V DR4 3200MHz/Fractal Design Define R5/EVGA SuperNOVA 850 G3/LG 32GK850G 31.5"/BenQ G2400W 24"/Sound Blaster ZX/2x Samsung 970 EVO Plus 500GB, 2TB/Saitek X52 Pro/TrackIR5 - TrackClip Pro/Win10 Pro 64bit
#6
Hopper64
SSC Member
  • Total Posts : 726
  • Reward points : 0
  • Joined: 2012/01/02 09:16:21
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/13 18:17:06 (permalink)
Mine did not work correctly either. Just went back to…8 until someone fixes it.

Asus R6EE
i9 10900X @ 5.0
GSkill F4-4000C18Q2-64GTZR
Intel 905p M.2 360G
Corsair AX1600i                                                   
EVGA 3090 FTW Ultra
EKWB Quantum Kinetic TBE 300 and VTX 160
Creative SB AE7
Asus ROG PG349Q
#7
DaBogo
New Member
  • Total Posts : 38
  • Reward points : 0
  • Joined: 2020/07/24 02:31:12
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/14 01:41:44 (permalink)
AstroCat
Clean install...
  • All NVML.dll search paths are included to fix Resizable BAR detect fail issue.
Does not fix this issue for me. Before the last version it was enabled, now it's not. Nothing changed on my end and Nvidia CP says it is enabled.
 
I also see an error window for NVML.dll flash for a moment as the app launches.
My NVML.dll file is located here: C:\Program Files\NVIDIA Corporation\NVSMI\nvml.dll
 
So for sure still broke, any fix?
 
UPDATE: Ok, I fixed. I had to manually copy NVML.dll file from: C:\Program Files\NVIDIA Corporation\NVSMI\ to C:\Windows\System32

Then when I relaunched X1 rebar is enabled.
 
 
 


OMG! You actually a genius! No way the solution was hitting me in da face since version 1.1.8.0 but instead to do something like this - i was waiting for the fix!
Amazing! Thank you very much!
 
Regards
Dali
#8
roberty35
Superclocked Member
  • Total Posts : 106
  • Reward points : 0
  • Joined: 2021/02/15 00:55:48
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/14 01:55:04 (permalink)
use DDU to uninstall old gpu drivers and then reinstall the new ones

Regards,
 
Associate Code for a nice discount: 54LU2WY82SCVYVA
(Don't forget to upload your invoice or no credit is given!)
#9
DaBogo
New Member
  • Total Posts : 38
  • Reward points : 0
  • Joined: 2020/07/24 02:31:12
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/14 02:18:17 (permalink)
roberty35
use DDU to uninstall old gpu drivers and then reinstall the new ones


that worked last time but after replacing my gpu from 3070 ftw3 ultra to 3080 ftw3 ultra not even DDU helped.
Only this small copy/paste from .dll file did fixed the issue.
 
But i confirm, it works like a charme.
What i still dont like - when i apply something under custom airflow on the card and switch the tab, the button "apply" lights up again like you can apply something. Also the custom fancurse set goes back from aggressive to normal BUT the CURVE itself doesnt change - it remains aggressive curve but with "normal" as the preset name. something like this. kind annoying. I feel it's more cosmetic issue?
#10
Hoggle
EVGA Forum Moderator
  • Total Posts : 7258
  • Reward points : 0
  • Joined: 2003/10/13 22:10:45
  • Location: Eugene, OR
  • Status: offline
  • Ribbons : 4
Re: Px1 1.20 version is out 2021/05/14 02:32:02 (permalink)
AstroCat
Clean install...
  • All NVML.dll search paths are included to fix Resizable BAR detect fail issue.
Does not fix this issue for me. Before the last version it was enabled, now it's not. Nothing changed on my end and Nvidia CP says it is enabled.
 
I also see an error window for NVML.dll flash for a moment as the app launches.
My NVML.dll file is located here: C:\Program Files\NVIDIA Corporation\NVSMI\nvml.dll
 
So for sure still broke, any fix?
 
UPDATE: Ok, I fixed. I had to manually copy NVML.dll file from: C:\Program Files\NVIDIA Corporation\NVSMI\ to C:\Windows\System32

Then when I relaunched X1 rebar is enabled.
 
 
 




Thanks for the tip on the fix.

Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
 
 
#11
welter_skelter
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2016/07/19 17:01:44
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/14 13:29:47 (permalink)
Just tried updating - still getting the missing nvml.dll error. 
 
I've tried the fixes above, but in a strange twist, I don't actually have a NVSMI folder in the location listed above: C:\Program Files\NVIDIA Corporation
 
In my system32 folder, I did a search and do have an nvml.dll already there - I tried making a NVSMI folder in the above NVIDIA folder, but that didn't work and I still get the same error on loading precision x.
 
Running a 3090FTW on latest drivers (the ones from two weeks ago) which are WHQL and not DHC or w/e and the latest firmware as flashed by precision x.
#12
will999999999
New Member
  • Total Posts : 79
  • Reward points : 0
  • Joined: 2016/07/25 18:08:02
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/14 19:28:48 (permalink)
More interested in if the resetting RGB and fan profiles are still a problem.

Intel i7 10700K | Asus Z490-E | G.skill 4,000MHz CL16 2x16GB DDR4 | EVGA FTW3 ULTRA RTX 3090 | EVGA Supernova 1,000W G2 | 1TB Sabrent Rocket Q4 M.2, 4TB Samsung 870 EVO 2.5" SATA, 8TB Seagate IronWolf 8TB 7200RPM SATA HDD
#13
bob16314
CLASSIFIED ULTRA Member
  • Total Posts : 7827
  • Reward points : 0
  • Joined: 2008/11/07 22:33:22
  • Location: Planet of the Babes
  • Status: offline
  • Ribbons : 674
Re: Px1 1.20 version is out 2021/05/15 03:02:29 (permalink) ☄ Helpfulby Cool GTX 2021/05/17 10:22:56
Install a DCH Graphics Driver (a 'Game Ready' driver) instead of the Standard Driver which will install the nvml.dll in the Windows\System32 folder...Go to NVIDIA Driver Downloads -> Beta and Older Drivers -> Windows Driver Type: DCH..Uninstall your current NVIDIA Graphics Driver and install the DCH Graphics Driver..That should fix the nvml.dll error, and if not, copy and paste the nvml.dll into the Program Files\EVGA\Precision X1 folder.
 
See the NVIDIA DCH/Standard Display Drivers for Windows 10 FAQ and other online sources if you search for the difference between the two.

Get NVIDIA Control Panel if needed.

* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.4GHz * 16GB G.SKILL Trident Z 4133MHz * Crucial MX500 M.2 1TB * 2x WD Caviar Black 500GB * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home/Win10 Pro * 
 
"Whatever it takes, as long as it works" - Me
 
 
 
#14
jcantara
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2013/04/13 19:49:40
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/15 15:03:14 (permalink)
dc8flyer
Release: 5/13/2021
  • Default fan speed will be set to 33% when auto mode is disabled.
  • In Fan AUTO Mode, TextBox & Slider is disabled and now shows "AUTO" in TextBox

This change seems broken on my 3080 FTW3.
 
Fans 1 and 2 will no longer spin down completely. Even when the temps are low and the fan curve tells them to go to 0%, they're stuck at 33%. Fan 3 seems to respond correctly and spin down. The sliders are also broken in the sense that Fans 1 and 2 will only let you drag them down to 33%, but Fan 3 lets you drag it down to 0%. Not sure which is supposed to be the correct thing. Setting the lowest speed to 33% on all 3 fans in the custom curve editor seems fine, and all 3 are now spinning at 33% as the lowest possible speed. But setting Fan 1 and 2 to 0% doesn't work at all.
 
All of this worked fine on 1.1.9.0 or whatever the last version was, I can't keep up with these 4 digit version numbers.
#15
Leafstalker
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2014/03/26 17:38:13
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/15 17:40:24 (permalink)
I just installed my 3080 FTW3 ULTRA today, and seen there was 1.2.0 update for PrecisionX, but I had read some users with 3080s updated the BIOS, and had problems after. Now, I'm too afraid to update my BIOS and break my 3080! I'll be keeping an eye out for more info, but I don't want to break what's working fine without P-X.

Part Number          Date Entered
10G-P5-3897-KR    9/21/2020 11:31:48 AM    YES

 
     
 
#16
sammaza421
New Member
  • Total Posts : 62
  • Reward points : 0
  • Joined: 2017/07/19 20:35:50
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/16 10:48:23 (permalink)
jcantara
dc8flyer
Release: 5/13/2021
  • Default fan speed will be set to 33% when auto mode is disabled.
  • In Fan AUTO Mode, TextBox & Slider is disabled and now shows "AUTO" in TextBox

This change seems broken on my 3080 FTW3.
 
Fans 1 and 2 will no longer spin down completely. Even when the temps are low and the fan curve tells them to go to 0%, they're stuck at 33%. Fan 3 seems to respond correctly and spin down. The sliders are also broken in the sense that Fans 1 and 2 will only let you drag them down to 33%, but Fan 3 lets you drag it down to 0%. Not sure which is supposed to be the correct thing. Setting the lowest speed to 33% on all 3 fans in the custom curve editor seems fine, and all 3 are now spinning at 33% as the lowest possible speed. But setting Fan 1 and 2 to 0% doesn't work at all.
 
All of this worked fine on 1.1.9.0 or whatever the last version was, I can't keep up with these 4 digit version numbers.


This is the OC bios default setting expect behavior.  Try your Normal bios and you will get 0% fans.
#17
J8EVGA
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2021/05/16 21:04:44
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/16 21:09:12 (permalink)
Hi,
I upgraded Precision X1 to v1.2.0 and now my graphics card fans will not spin at all.  I tried manually settings the fans to 100%, auto, and manual custom curve and the fans will not spin.  I have an evga 3070 XC3 Black w/ Game Ready Driver 466.27.  Any help is appreciated.
 
post edited by J8EVGA - 2021/05/16 21:13:28
#18
will999999999
New Member
  • Total Posts : 79
  • Reward points : 0
  • Joined: 2016/07/25 18:08:02
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/17 09:22:09 (permalink)
So installing this actually gave me the missing DLL problem. What the f---? Uninstalled and reinstalled 1.1.9 and all is back to normal.
 
Looks like I'm passing on this version. I've already just accepted at this point that I'll never be able to reliably use the fan extension on the card. I'm starting to think the RGB and fan profiles resetting at random will always be a problem...

Intel i7 10700K | Asus Z490-E | G.skill 4,000MHz CL16 2x16GB DDR4 | EVGA FTW3 ULTRA RTX 3090 | EVGA Supernova 1,000W G2 | 1TB Sabrent Rocket Q4 M.2, 4TB Samsung 870 EVO 2.5" SATA, 8TB Seagate IronWolf 8TB 7200RPM SATA HDD
#19
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2604
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: online
  • Ribbons : 14
Re: Px1 1.20 version is out 2021/05/17 09:37:53 (permalink)
Regarding the NVML.dll, we're looking into a different way to avoid this issue entirely. 
#20
will999999999
New Member
  • Total Posts : 79
  • Reward points : 0
  • Joined: 2016/07/25 18:08:02
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/17 09:39:47 (permalink)
EVGATech_LeeM
Regarding the NVML.dll, we're looking into a different way to avoid this issue entirely. 





PLEASE also look into the RGB and fan profiles resetting at random!

Intel i7 10700K | Asus Z490-E | G.skill 4,000MHz CL16 2x16GB DDR4 | EVGA FTW3 ULTRA RTX 3090 | EVGA Supernova 1,000W G2 | 1TB Sabrent Rocket Q4 M.2, 4TB Samsung 870 EVO 2.5" SATA, 8TB Seagate IronWolf 8TB 7200RPM SATA HDD
#21
Ciddharthas
iCX Member
  • Total Posts : 332
  • Reward points : 0
  • Joined: 2020/09/17 07:58:09
  • Location: Boulder, CO, USA
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/19 11:22:44 (permalink)

Sticky this please.

CPU: i7 10700k @ 5.0 GHz with 280mm Corsair H115i Elite Capellix cooler
MB: MSI Z490 Meg Ace
RAM: 64gb Corsair Dominator Platinum RGB @ 3466 MHz
GPU: 3080 FTW3 Ultra Hybrid
Power Supply: Corsair HX1000i (1000 Watts)
Primary Monitor: LG CX48 (4k OLED)
Keyboard: Corsair K95 Platinum RGB
Mouse: Corsair Scimitar Elite RGB
Headset: Arctis Pro Wireless
Mic: Elgato Wave 3
VR: Occulus Quest 2
#22
RogueMaster
Superclocked Member
  • Total Posts : 109
  • Reward points : 0
  • Joined: 2007/03/19 20:15:42
  • Status: online
  • Ribbons : 1
Re: Px1 1.20 version is out 2021/05/19 12:00:37 (permalink)
I've started getting error messages that state 'a task was cancelled' on startup of PX1. The only thing I can think of that may be causing the error is that PX1 is having issues communicating with the update server.

The timestamp shows that PX1 last checked for an update two days ago (May 17). Doing a manual check takes quite a bit longer than normal, before it too will give the 'a task was cancelled' error message. Clicking 'OK' on that window will then pop up a message about 1.2.0 being the current version, but the 'last checked' timestamp doesn't change.

Everything else appears to be running just fine. I've had no issues with fan control, temps, RGB, etc..  It just looks like there may some sort of issue with contacting the server to check for an update.


#23
koitsu
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2006/04/01 06:12:49
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/19 14:42:10 (permalink)
Still crashes on Windows 7 x64 SP1; same behaviour as 1.1.8.0 and 1.1.9.0.  Last known working version is 1.1.7.0.
#24
w6kd
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2002/09/28 09:09:51
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/19 17:04:53 (permalink)
RogueMaster
I've started getting error messages that state 'a task was cancelled' on startup of PX1. The only thing I can think of that may be causing the error is that PX1 is having issues communicating with the update server.

The timestamp shows that PX1 last checked for an update two days ago (May 17). Doing a manual check takes quite a bit longer than normal, before it too will give the 'a task was cancelled' error message. Clicking 'OK' on that window will then pop up a message about 1.2.0 being the current version, but the 'last checked' timestamp doesn't change.



Seeing the same behavior here.  It's a new install of 1.2.0 after updating the nVidia drivers, and it still shows last checked on 1/23/2021 after multiple startups and several attempts at a manual check by clicking "check now."
#25
dl_unlimited
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2009/07/15 05:06:33
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/19 22:36:40 (permalink)
will999999999
More interested in if the resetting RGB and fan profiles are still a problem.


Been running for two days now and FINALLY the RGB profile seems to be holding. EDIT: just reset itself now....lasted longer but not fixed.
post edited by dl_unlimited - 2021/05/19 23:10:20
#26
RogueMaster
Superclocked Member
  • Total Posts : 109
  • Reward points : 0
  • Joined: 2007/03/19 20:15:42
  • Status: online
  • Ribbons : 1
Re: Px1 1.20 version is out 2021/05/20 12:23:46 (permalink)
w6kd
 
Seeing the same behavior here.  It's a new install of 1.2.0 after updating the nVidia drivers, and it still shows last checked on 1/23/2021 after multiple startups and several attempts at a manual check by clicking "check now."



I'm wondering if the recent Windows update broke something, or if it's just coincidence.  The error started, for me, immediately after the OS update.


#27
steve334x
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2021/05/02 14:31:37
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/22 08:30:29 (permalink)
v1.20 still simply crashes (or closes itself) when I try to update the VBIOS to enable Resizeable BAR. What the heck?
#28
CyberGeek99
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2021/05/18 08:26:48
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/22 22:22:14 (permalink)
X1  1.2.0.0
Showing Resizable BAR : Disabled
Please check your motherboard vendor
 
I have updated my motherboard to the latest BIOS
I have enabled RBAR in BIOS
 
Is there a fault with X1 software?
 

Attached Image(s)

#29
tboatcap
New Member
  • Total Posts : 24
  • Reward points : 0
  • Joined: 2015/11/22 18:33:01
  • Status: offline
  • Ribbons : 0
Re: Px1 1.20 version is out 2021/05/23 12:37:36 (permalink)
steve334x
v1.20 still simply crashes (or closes itself) when I try to update the VBIOS to enable Resizeable BAR. What the heck?




I have the same issue with an Asus board (updated bios and settings for ReBar), using an Evga 3070 XC3 Ultra.
#30
Page: 12 > Showing page 1 of 2
Jump to:
  • Back to Mobile