EVGA

Process lasso

Author
tank1023
CLASSIFIED ULTRA Member
  • Total Posts : 5380
  • Reward points : 0
  • Joined: 2009/02/19 06:44:05
  • Location: Colorado
  • Status: offline
  • Ribbons : 16
2010/10/31 14:42:43 (permalink)
Won't show any of my fahcore_11,15 or a3.
They just do t show up for me to set the priority or affinity. I've uninstalled it and reinstalled but nothing. I know they are working cause they show up in task manager.

Folding whatever I can :o)     
http://www.heatware.com/eval.php?id=67403
    
  

#1

20 Replies Related Threads

    iancook221188
    Superclocked Member
    • Total Posts : 156
    • Reward points : 0
    • Joined: 2010/01/22 12:34:13
    • Location: uk
    • Status: offline
    • Ribbons : 1
    Re:Process lasso 2010/10/31 14:46:10 (permalink)
    are all the client running at the same time?


    #2
    kram36
    The Destroyer
    • Total Posts : 21357
    • Reward points : 0
    • Joined: 2009/10/27 19:00:58
    • Location: United States
    • Status: offline
    • Ribbons : 72
    Re:Process lasso 2010/10/31 14:46:34 (permalink)
    Did you make sure you have the proper 32bit or 64bit version for your os?

    Use My Associates Code TCPVYLY1ETNXOWN & SAVE on your next purchase!
    #3
    tank1023
    CLASSIFIED ULTRA Member
    • Total Posts : 5380
    • Reward points : 0
    • Joined: 2009/02/19 06:44:05
    • Location: Colorado
    • Status: offline
    • Ribbons : 16
    Re:Process lasso 2010/10/31 15:03:22 (permalink)
    Yes / yes

    Folding whatever I can :o)     
    http://www.heatware.com/eval.php?id=67403
        
      

    #4
    derrenr
    iCX Member
    • Total Posts : 345
    • Reward points : 0
    • Joined: 2008/03/19 12:39:17
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/10/31 15:14:13 (permalink)
    Try "Options-General Process Lasso Settings- manage processes of all users". I had the same issue and I think that's what fixed it.

         
    <img src="http://i771.photobucket.com/albums/xx352/AcesofDeath7/EVGA%20Folding%20Hall%20of%20Fame%20Badges/foldingHOFBadge_Lunatic_SSC1.jpg">
    Affiliate Code: IDN7FJL82O
    #5
    dubzhouse
    FTW Member
    • Total Posts : 1838
    • Reward points : 0
    • Joined: 2008/01/20 13:53:32
    • Status: offline
    • Ribbons : 13
    Re:Process lasso 2010/10/31 15:23:21 (permalink)
    Can you take a screenshot of what your process lasso looks like when open?
    #6
    tank1023
    CLASSIFIED ULTRA Member
    • Total Posts : 5380
    • Reward points : 0
    • Joined: 2009/02/19 06:44:05
    • Location: Colorado
    • Status: offline
    • Ribbons : 16
    Re:Process lasso 2010/10/31 15:52:37 (permalink)
    Derrner, that worked after I reinstalled it, thanks

    Folding whatever I can :o)     
    http://www.heatware.com/eval.php?id=67403
        
      

    #7
    derrenr
    iCX Member
    • Total Posts : 345
    • Reward points : 0
    • Joined: 2008/03/19 12:39:17
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/10/31 16:26:55 (permalink)
    NP Tank

         
    <img src="http://i771.photobucket.com/albums/xx352/AcesofDeath7/EVGA%20Folding%20Hall%20of%20Fame%20Badges/foldingHOFBadge_Lunatic_SSC1.jpg">
    Affiliate Code: IDN7FJL82O
    #8
    Carlitos714
    FTW Member
    • Total Posts : 1126
    • Reward points : 0
    • Joined: 2009/03/01 02:36:45
    • Location: San Diego, CA
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/11/02 09:32:06 (permalink)
    im running an i7-920 and two gts 450's.  the i7 is using -7
     
    will i benefit using Process lasso?
     
    I my rig maybe two hours out the day for just internet use and charging/transfer music from itunes to my ipod.

    [HTPC] Zotac Zbox Nano AD12, 4 GB Corsair 7-7-7-20, Intel X25-M 120 GB, 55 inch Samsung plasma  
     
    [GAMING RIG/DAILY DRIVER] i7-3820 @ 4.85 Ghz, GA-X79-UDR3, Heatkiller 3.0, HWL BI GTX 480, MCP 350 x 2 , XSPC restop, EVGA GTX 680 SLI, HWL BI GTX 360, 16 GB Doms, Crucial M4 256 gb, 120 GB Torqx SSD, DELL PERC 5I W/ HD204UI 2TB x 6 RAID 5, Xonar DX, Corsair AX1200i, WinTV-HVR-1250 XSPC H2
     
    [Peripherals] Ducky Dragon| MX518| Dell 2408WFP| Fiio E9 Amp| BeyerD DT-880 Pro 250 ohms
    #9
    SirJamesDTech
    CLASSIFIED Member
    • Total Posts : 4259
    • Reward points : 0
    • Joined: 2008/12/09 13:55:46
    • Location: USA AFFILIATE CODE R2WIYPJ5QM
    • Status: offline
    • Ribbons : 46
    Re:Process lasso 2010/11/02 09:35:47 (permalink)
    You'd get benefit from Lasso if you were running -8.

    Asus Maximus VII Hero Z97 | i7-4790K Devil's Canyon @ 4.4GHz | Corsair H105 | EVGA GTX 1080 Ti SC2 | Samsung 850 Pro 256GB, Samsung 840 EVO 1TB, SanDisk Ultra II 480 GB SSD | 16GB Dominator GT DDR3 2000 @ 2400 | EVGA 850W G2 Full Modular | Ascer Predator 27" IPS 1440p 144Hz G-Sync | Creative Sound Blaster Z | Audio-Technica ATH-M50X Headphones | Razer Blackwidow Chroma RGB Mechanical Keyboard | Corsair 760T Full Tower
    #10
    Carlitos714
    FTW Member
    • Total Posts : 1126
    • Reward points : 0
    • Joined: 2009/03/01 02:36:45
    • Location: San Diego, CA
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/11/02 09:46:48 (permalink)
    SirJamesDDJ

    You'd get benefit from Lasso if you were running -8.

    so you think i will get better ppd if i use -8 and two gts 450 instead of -7 and two gts 450?

    [HTPC] Zotac Zbox Nano AD12, 4 GB Corsair 7-7-7-20, Intel X25-M 120 GB, 55 inch Samsung plasma  
     
    [GAMING RIG/DAILY DRIVER] i7-3820 @ 4.85 Ghz, GA-X79-UDR3, Heatkiller 3.0, HWL BI GTX 480, MCP 350 x 2 , XSPC restop, EVGA GTX 680 SLI, HWL BI GTX 360, 16 GB Doms, Crucial M4 256 gb, 120 GB Torqx SSD, DELL PERC 5I W/ HD204UI 2TB x 6 RAID 5, Xonar DX, Corsair AX1200i, WinTV-HVR-1250 XSPC H2
     
    [Peripherals] Ducky Dragon| MX518| Dell 2408WFP| Fiio E9 Amp| BeyerD DT-880 Pro 250 ohms
    #11
    jpeck2009
    iCX Member
    • Total Posts : 397
    • Reward points : 0
    • Joined: 2009/08/13 16:54:36
    • Status: offline
    • Ribbons : 1
    Re:Process lasso 2010/11/02 10:03:37 (permalink)
    Carlitos,

    Yes, you should benefit by using process lasso on your rig.  I HAD to install it on my i7 950 with a 450 and 460 just to give my GPU's enough cpu cycles to fold properly.
     
    I doubt both cards will folding efficiently if you use -smp 8...
    post edited by jpeck2009 - 2010/11/02 10:05:28

             
    #12
    Carlitos714
    FTW Member
    • Total Posts : 1126
    • Reward points : 0
    • Joined: 2009/03/01 02:36:45
    • Location: San Diego, CA
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/11/02 10:05:32 (permalink)
    jpeck2009

    Carlitos,

    Yes, you should benefit by using process lasso on your rig.  I HAD to install it on my i7 950 with a 450 and 460 just to give my GPU's enough cpu cycles to fold properly.

     
    so should i use 7 cores or 8 cores on my cpu? how should i set it up? 1 core for both the gpu's?

    [HTPC] Zotac Zbox Nano AD12, 4 GB Corsair 7-7-7-20, Intel X25-M 120 GB, 55 inch Samsung plasma  
     
    [GAMING RIG/DAILY DRIVER] i7-3820 @ 4.85 Ghz, GA-X79-UDR3, Heatkiller 3.0, HWL BI GTX 480, MCP 350 x 2 , XSPC restop, EVGA GTX 680 SLI, HWL BI GTX 360, 16 GB Doms, Crucial M4 256 gb, 120 GB Torqx SSD, DELL PERC 5I W/ HD204UI 2TB x 6 RAID 5, Xonar DX, Corsair AX1200i, WinTV-HVR-1250 XSPC H2
     
    [Peripherals] Ducky Dragon| MX518| Dell 2408WFP| Fiio E9 Amp| BeyerD DT-880 Pro 250 ohms
    #13
    jpeck2009
    iCX Member
    • Total Posts : 397
    • Reward points : 0
    • Joined: 2009/08/13 16:54:36
    • Status: offline
    • Ribbons : 1
    Re:Process lasso 2010/11/02 10:09:12 (permalink)
    Carlitos714

    jpeck2009

    Carlitos,

    Yes, you should benefit by using process lasso on your rig.  I HAD to install it on my i7 950 with a 450 and 460 just to give my GPU's enough cpu cycles to fold properly.


    so should i use 7 cores or 8 cores on my cpu? how should i set it up? 1 core for both the gpu's?

    I have -smp 7 for CPU bigadv folding...  in lasso, I have the following configs:
    FahCore_15.exe: Default Priority, HIGH, CPU Affinity, 1
    FahCore_a3.exe: Default Priority, Idle, CPU Affinity, 0 2 3 4 5 6 7 
      
    So, my GPU's get to use 1 core, the CPU the rest.

             
    #14
    SirJamesDTech
    CLASSIFIED Member
    • Total Posts : 4259
    • Reward points : 0
    • Joined: 2008/12/09 13:55:46
    • Location: USA AFFILIATE CODE R2WIYPJ5QM
    • Status: offline
    • Ribbons : 46
    Re:Process lasso 2010/11/02 10:10:57 (permalink)
    Carlitos714

    SirJamesDDJ

    You'd get benefit from Lasso if you were running -8.

    so you think i will get better ppd if i use -8 and two gts 450 instead of -7 and two gts 450?

     
    Well for my 980X and 3 GPUs, I've got -12 going with Process Lasso.
    I don't run -bigadv because I can't afford to leave my setup alone for 3 days.
    Remember after each of these to go into Options > Check Forced mode: Reapply process priorities and affinities if they change.
    There are two situations which require some toggling:
     
    #1 When the GPUs are going at a 925/912 OPENMMGPU WU (FahCore_15.exe), because they require a heightened amount of CPU usage I have the GPUs on Default Priority Normal and Default CPU Affinity 2,4
    For the SMP (FahCore_a3.exe) the Default Priority Idle and Default CPU Affinity is every core except 2, which I have unchecked.
    #2 When the GPUs are chugging through 611 OPENMMGPU WUs (10632) (FahCore_15.exe) there isn't much CPU usage that leaks in so leave the GPUs on Default Priority Normal and Default CPU Affinity 2,4 however
    For the SMP (FahCore_a3.exe) the Default Priority Idle and this time the Default CPU Affinity is fine on absolutely all cores, including 2.
    Hope this helps!
    post edited by SirJamesDDJ - 2010/11/02 10:14:51

    Asus Maximus VII Hero Z97 | i7-4790K Devil's Canyon @ 4.4GHz | Corsair H105 | EVGA GTX 1080 Ti SC2 | Samsung 850 Pro 256GB, Samsung 840 EVO 1TB, SanDisk Ultra II 480 GB SSD | 16GB Dominator GT DDR3 2000 @ 2400 | EVGA 850W G2 Full Modular | Ascer Predator 27" IPS 1440p 144Hz G-Sync | Creative Sound Blaster Z | Audio-Technica ATH-M50X Headphones | Razer Blackwidow Chroma RGB Mechanical Keyboard | Corsair 760T Full Tower
    #15
    Carlitos714
    FTW Member
    • Total Posts : 1126
    • Reward points : 0
    • Joined: 2009/03/01 02:36:45
    • Location: San Diego, CA
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/11/03 06:19:09 (permalink)
    jpeck2009

    Carlitos714

    jpeck2009

    Carlitos,

    Yes, you should benefit by using process lasso on your rig.  I HAD to install it on my i7 950 with a 450 and 460 just to give my GPU's enough cpu cycles to fold properly.


    so should i use 7 cores or 8 cores on my cpu? how should i set it up? 1 core for both the gpu's?

    I have -smp 7 for CPU bigadv folding...  in lasso, I have the following configs:
    FahCore_15.exe: Default Priority, HIGH, CPU Affinity, 1
    FahCore_a3.exe: Default Priority, Idle, CPU Affinity, 0 2 3 4 5 6 7 
     
    So, my GPU's get to use 1 core, the CPU the rest.

    So today I woke up and my GTS 450's were getting 2,xxx ppd! I was like ****. I opened EVGA precision and the load on the gpu's were all over the place! Do you  know what causes this?
     
    I said screw this. Downloaded Process Lasso and configured it the same as what you have. My gpus are now pumping out 14,200/14,900 ppd on 912/925 wu. Thank you very much for the help.
     

    [HTPC] Zotac Zbox Nano AD12, 4 GB Corsair 7-7-7-20, Intel X25-M 120 GB, 55 inch Samsung plasma  
     
    [GAMING RIG/DAILY DRIVER] i7-3820 @ 4.85 Ghz, GA-X79-UDR3, Heatkiller 3.0, HWL BI GTX 480, MCP 350 x 2 , XSPC restop, EVGA GTX 680 SLI, HWL BI GTX 360, 16 GB Doms, Crucial M4 256 gb, 120 GB Torqx SSD, DELL PERC 5I W/ HD204UI 2TB x 6 RAID 5, Xonar DX, Corsair AX1200i, WinTV-HVR-1250 XSPC H2
     
    [Peripherals] Ducky Dragon| MX518| Dell 2408WFP| Fiio E9 Amp| BeyerD DT-880 Pro 250 ohms
    #16
    Carlitos714
    FTW Member
    • Total Posts : 1126
    • Reward points : 0
    • Joined: 2009/03/01 02:36:45
    • Location: San Diego, CA
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/11/03 06:32:32 (permalink)
    SirJamesDDJ

    Carlitos714

    SirJamesDDJ

    You'd get benefit from Lasso if you were running -8.

    so you think i will get better ppd if i use -8 and two gts 450 instead of -7 and two gts 450?


    Well for my 980X and 3 GPUs, I've got -12 going with Process Lasso.
    I don't run -bigadv because I can't afford to leave my setup alone for 3 days.
    Remember after each of these to go into Options > Check Forced mode: Reapply process priorities and affinities if they change.
    There are two situations which require some toggling:

    #1 When the GPUs are going at a 925/912 OPENMMGPU WU (FahCore_15.exe), because they require a heightened amount of CPU usage I have the GPUs on Default Priority Normal and Default CPU Affinity 2,4
    For the SMP (FahCore_a3.exe) the Default Priority Idle and Default CPU Affinity is every core except 2, which I have unchecked.
    #2 When the GPUs are chugging through 611 OPENMMGPU WUs (10632) (FahCore_15.exe) there isn't much CPU usage that leaks in so leave the GPUs on Default Priority Normal and Default CPU Affinity 2,4 however
    For the SMP (FahCore_a3.exe) the Default Priority Idle and this time the Default CPU Affinity is fine on absolutely all cores, including 2.
    Hope this helps!

    thank you very  much for the great info!
    I do have a few questions. The I fold 24/7 and I'm away from my computer about 20 hours (work/sleep). How should I set Process Lasso????
     
    I currently have
    -smp 7 for CPU bigadv
    FahCore_15.exe: Default Priority, HIGH, CPU Affinity, 1
    FahCore_a3.exe: Default Priority, Idle, CPU Affinity, 0 2 3 4 5 6 7
    this is what jpeck2009 suggested and I did it really quick right before I left for work so I didn't read much into it.
    When I use my computer (3hours a day max) I surf the web, transfer file, and sometimes listen to itunes.
     
    should I have a certain config for the time Im at work or different one for when I'm on my computer?
    should I put the FahCore_a3.exe on high, realtime, etc?
     
    Thank you very much for the excellent help!
     
     

    [HTPC] Zotac Zbox Nano AD12, 4 GB Corsair 7-7-7-20, Intel X25-M 120 GB, 55 inch Samsung plasma  
     
    [GAMING RIG/DAILY DRIVER] i7-3820 @ 4.85 Ghz, GA-X79-UDR3, Heatkiller 3.0, HWL BI GTX 480, MCP 350 x 2 , XSPC restop, EVGA GTX 680 SLI, HWL BI GTX 360, 16 GB Doms, Crucial M4 256 gb, 120 GB Torqx SSD, DELL PERC 5I W/ HD204UI 2TB x 6 RAID 5, Xonar DX, Corsair AX1200i, WinTV-HVR-1250 XSPC H2
     
    [Peripherals] Ducky Dragon| MX518| Dell 2408WFP| Fiio E9 Amp| BeyerD DT-880 Pro 250 ohms
    #17
    magnumsrule
    iCX Member
    • Total Posts : 470
    • Reward points : 0
    • Joined: 2009/05/18 12:07:38
    • Location: Alberta, Canada
    • Status: offline
    • Ribbons : 1
    Re:Process lasso 2010/11/03 08:05:35 (permalink)
    Thanks for all the info in this thread! Installed and running.


     Coolermaster HAF X ~ Gigabyte X58A-UD3R ~ i7 920  4.10 GHz D0 ~ 12 gigs Corsair Dominator ram ~ 3X EVGA GTX 470 @ 805MHz  ~ Win 7 x64 ~ 128gig OCZ SSD ~ 1200w Corsair ~ CPU and GPX watercooled
    #18
    SirJamesDTech
    CLASSIFIED Member
    • Total Posts : 4259
    • Reward points : 0
    • Joined: 2008/12/09 13:55:46
    • Location: USA AFFILIATE CODE R2WIYPJ5QM
    • Status: offline
    • Ribbons : 46
    Re:Process lasso 2010/11/03 08:24:04 (permalink)
    Carlitos714

    SirJamesDDJ

    Carlitos714

    SirJamesDDJ

    You'd get benefit from Lasso if you were running -8.

    so you think i will get better ppd if i use -8 and two gts 450 instead of -7 and two gts 450?


    Well for my 980X and 3 GPUs, I've got -12 going with Process Lasso.
    I don't run -bigadv because I can't afford to leave my setup alone for 3 days.
    Remember after each of these to go into Options > Check Forced mode: Reapply process priorities and affinities if they change.
    There are two situations which require some toggling:

    #1 When the GPUs are going at a 925/912 OPENMMGPU WU (FahCore_15.exe), because they require a heightened amount of CPU usage I have the GPUs on Default Priority Normal and Default CPU Affinity 2,4
    For the SMP (FahCore_a3.exe) the Default Priority Idle and Default CPU Affinity is every core except 2, which I have unchecked.
    #2 When the GPUs are chugging through 611 OPENMMGPU WUs (10632) (FahCore_15.exe) there isn't much CPU usage that leaks in so leave the GPUs on Default Priority Normal and Default CPU Affinity 2,4 however
    For the SMP (FahCore_a3.exe) the Default Priority Idle and this time the Default CPU Affinity is fine on absolutely all cores, including 2.
    Hope this helps!

    thank you very  much for the great info!
    I do have a few questions. The I fold 24/7 and I'm away from my computer about 20 hours (work/sleep). How should I set Process Lasso????

    I currently have
    -smp 7 for CPU bigadv
    FahCore_15.exe: Default Priority, HIGH, CPU Affinity, 1
    FahCore_a3.exe: Default Priority, Idle, CPU Affinity, 0 2 3 4 5 6 7
    this is what jpeck2009 suggested and I did it really quick right before I left for work so I didn't read much into it.
    When I use my computer (3hours a day max) I surf the web, transfer file, and sometimes listen to itunes.

    should I have a certain config for the time Im at work or different one for when I'm on my computer?
    should I put the FahCore_a3.exe on high, realtime, etc?

    Thank you very much for the excellent help!



     
    With Process Lasso, you can go for smp -8 and just uncheck one of the cores on the CPU.
    As for the GPUs spiking all over the place, do you have SLI enabled? If so, disable it.

    Asus Maximus VII Hero Z97 | i7-4790K Devil's Canyon @ 4.4GHz | Corsair H105 | EVGA GTX 1080 Ti SC2 | Samsung 850 Pro 256GB, Samsung 840 EVO 1TB, SanDisk Ultra II 480 GB SSD | 16GB Dominator GT DDR3 2000 @ 2400 | EVGA 850W G2 Full Modular | Ascer Predator 27" IPS 1440p 144Hz G-Sync | Creative Sound Blaster Z | Audio-Technica ATH-M50X Headphones | Razer Blackwidow Chroma RGB Mechanical Keyboard | Corsair 760T Full Tower
    #19
    Carlitos714
    FTW Member
    • Total Posts : 1126
    • Reward points : 0
    • Joined: 2009/03/01 02:36:45
    • Location: San Diego, CA
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/11/03 09:42:19 (permalink)
    SirJamesDDJ

    Carlitos714

    SirJamesDDJ

    Carlitos714

    SirJamesDDJ

    You'd get benefit from Lasso if you were running -8.

    so you think i will get better ppd if i use -8 and two gts 450 instead of -7 and two gts 450?


    Well for my 980X and 3 GPUs, I've got -12 going with Process Lasso.
    I don't run -bigadv because I can't afford to leave my setup alone for 3 days.
    Remember after each of these to go into Options > Check Forced mode: Reapply process priorities and affinities if they change.
    There are two situations which require some toggling:

    #1 When the GPUs are going at a 925/912 OPENMMGPU WU (FahCore_15.exe), because they require a heightened amount of CPU usage I have the GPUs on Default Priority Normal and Default CPU Affinity 2,4
    For the SMP (FahCore_a3.exe) the Default Priority Idle and Default CPU Affinity is every core except 2, which I have unchecked.
    #2 When the GPUs are chugging through 611 OPENMMGPU WUs (10632) (FahCore_15.exe) there isn't much CPU usage that leaks in so leave the GPUs on Default Priority Normal and Default CPU Affinity 2,4 however
    For the SMP (FahCore_a3.exe) the Default Priority Idle and this time the Default CPU Affinity is fine on absolutely all cores, including 2.
    Hope this helps!

    thank you very  much for the great info!
    I do have a few questions. The I fold 24/7 and I'm away from my computer about 20 hours (work/sleep). How should I set Process Lasso????

    I currently have
    -smp 7 for CPU bigadv
    FahCore_15.exe: Default Priority, HIGH, CPU Affinity, 1
    FahCore_a3.exe: Default Priority, Idle, CPU Affinity, 0 2 3 4 5 6 7
    this is what jpeck2009 suggested and I did it really quick right before I left for work so I didn't read much into it.
    When I use my computer (3hours a day max) I surf the web, transfer file, and sometimes listen to itunes.

    should I have a certain config for the time Im at work or different one for when I'm on my computer?
    should I put the FahCore_a3.exe on high, realtime, etc?

    Thank you very much for the excellent help!




    With Process Lasso, you can go for smp -8 and just uncheck one of the cores on the CPU.
    As for the GPUs spiking all over the place, do you have SLI enabled? If so, disable it.

    ok thank you.
    the i have only enabled sli once a few days back when I did a vantage run. I will double check SLI is not enabled. I am sure that its not running sli mode, but i will check anyhow

    [HTPC] Zotac Zbox Nano AD12, 4 GB Corsair 7-7-7-20, Intel X25-M 120 GB, 55 inch Samsung plasma  
     
    [GAMING RIG/DAILY DRIVER] i7-3820 @ 4.85 Ghz, GA-X79-UDR3, Heatkiller 3.0, HWL BI GTX 480, MCP 350 x 2 , XSPC restop, EVGA GTX 680 SLI, HWL BI GTX 360, 16 GB Doms, Crucial M4 256 gb, 120 GB Torqx SSD, DELL PERC 5I W/ HD204UI 2TB x 6 RAID 5, Xonar DX, Corsair AX1200i, WinTV-HVR-1250 XSPC H2
     
    [Peripherals] Ducky Dragon| MX518| Dell 2408WFP| Fiio E9 Amp| BeyerD DT-880 Pro 250 ohms
    #20
    derrenr
    iCX Member
    • Total Posts : 345
    • Reward points : 0
    • Joined: 2008/03/19 12:39:17
    • Status: offline
    • Ribbons : 3
    Re:Process lasso 2010/11/03 09:55:08 (permalink)

    SirJamesDDJ
    "With Process Lasso, you can go for smp -8 and just uncheck one of the cores on the CPU.
    As for the GPUs spiking all over the place, do you have SLI enabled? If so, disable it."


    I'm not sure if anybody else has come across this but I found that when I tried running -smp 8 and then unchecking a core with process lasso that it raised my TPF vs using -smp 7 and unchecking one core with process lasso. Have you tried it both ways SirJames? My results could have ended up that way for some other reason.
     
    Edit: I screwed up how the quote is showing
    post edited by derrenr - 2010/11/03 09:57:25

         
    <img src="http://i771.photobucket.com/albums/xx352/AcesofDeath7/EVGA%20Folding%20Hall%20of%20Fame%20Badges/foldingHOFBadge_Lunatic_SSC1.jpg">
    Affiliate Code: IDN7FJL82O
    #21
    Jump to:
  • Back to Mobile