EVGA

Precision XOC 6.1.2 crashes

Author
Post
Essentials Only Full Version
Mizumori_Minami
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2017/04/10 04:02:56
  • Status: offline
  • Ribbons : 0
2017/04/10 04:35:36 (permalink)
When I start Precision XOC, "Encountered an improper argument." is displayed
 
Precision XOC starts up but values such as temperature information, GPU clock, memory clock etc. are not displayed
 
Trying to tame up with something causes the program to crash and kill it.
 
From the time the Precision XOC is started for the first time, the fan on the power supply connector is constantly turning with full rotation
 
Both stand-alone version and Steam version give similar errors
 
CPU:AMD Ryzen 7 1700X
CPU Cooler:H110i(Corsair Link is not connected to USB header)
M/B:Asrock Fatal1ty X370 Professional Gaming(BIOS Ver2.00)
Memory:Crucial BLS8G4D240FSB ×2 (8GB×2)
GPU:EVGA GTX 1080 FTW2
Power Unit:EVGA SuperNOVA 750 P2
OS:Windows10 Version 1703(x64)
GeForce Driver Ver381.65
Precision XOC Ver6.1.2


Attached Image(s)

#1

2 Replies Related Threads
    bob16314
    Omnipotent Enthusiast
    • Total Posts : 8048
    • Reward points : 0
    • Joined: 2008/11/07 22:33:22
    • Location: Planet of the Babes
    • Status: offline
    • Ribbons : 761
    Re: Precision XOC 6.1.2 crashes 2017/04/10 13:16:12 (permalink)
    Welcome to the forums..Corsair Link software is suspect and jumps out at me, has been known to cause problems before with Precision and other software..Even though you don't have it physically connected to a USB header, I would uninstall the software, reboot, and roll from there..You could also try the latest Corsair Link from Corsair Downloads if you haven't yet and see what happens.

    * Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * 
     
    "Whatever it takes, as long as it works" - Me
     
     
     
    #2
    Mizumori_Minami
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2017/04/10 04:02:56
    • Status: offline
    • Ribbons : 0
    Re: Precision XOC 6.1.2 crashes 2017/04/11 01:10:27 (permalink)
    Thank you for replying bob16314.


    Since I first suspected a malfunction inside the OS, reinstall the OS
    The software to be installed is "Motherboard Driver AMD all in 1 driver ver: 16.50.2601", "GeForce Driver Ver 381.65" and "Precision XOC Ver 6.1.2
    "Only focused on.

    Now if you care about installing Ver6.0.9 which is the old version, you can watch without any warning and monitor the status firmly. But setting around the fan is not good enough

    As for the state, the fan on the power connector side is turning fully in whatever setting is made, I think that the setting from Precision XOC is properly reflected in the fan on the opposite side.

    I do not know if this is derived from the version of Precision XOC, or it is derived from a hardware malfunction.


    #3
    Jump to:
  • Back to Mobile