Lashmush
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2018/04/17 01:19:03
- Status: offline
- Ribbons : 0
Not sure if this is a common problem already addressed but I just thought I'd mention that my 2080 Ti's power limit keeps reverting to 100% every time the application is restarted. Everything else loads fine but the Temp Tuner obviously scales down proportionately due to this, capping my max clock lower than it should be.
Other than that, love the program and looking forward to new iterations of it.
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: Precision X1 power limit not saved?
2018/11/02 09:38:23
(permalink)
It's been an ongoing problem with Precision for a long time now that some (most) settings won't be saved unless Precision is closed after making and applying changes..That may be the problem..Close and open Precision again after making/applying changes and before turning off/restarting your PC and see if settings changes still remain..If the changes remain, it should be fine after that.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
Lashmush
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2018/04/17 01:19:03
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2018/11/02 11:22:33
(permalink)
I found a solution to it, although it's not perfectly to my liking. So I had Power and Temp caps uncoupled and that seems to have been the issue. Having them both connected does the trick. It's fine since my card peaks at 70c and the max throttle is either my preferred standard 84 or the max 88. But I suppose this is good info to know for anyone else who might've set it up this way as well, and useful info to fix in a future update.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Precision X1 power limit not saved?
2018/11/02 11:55:08
(permalink)
I have not had a problem with this latest version on Power and Temp Targets not sticking.
Fan control though is still very iffy on profiles.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Lashmush
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2018/04/17 01:19:03
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2018/11/02 12:04:31
(permalink)
I run my fans with the default auto curve and it works just fine. I gather you have issues with custom curves or manual speeds?
|
somethingc00l
EGC Admin
- Total Posts : 752
- Reward points : 0
- Joined: 2009/03/14 13:44:57
- Status: offline
- Ribbons : 11
Re: Precision X1 power limit not saved?
2018/11/03 15:16:30
(permalink)
I can confirm I have the same issue not saving with unlinked power/temp. Link em and it saves.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Precision X1 power limit not saved?
2018/11/03 15:18:07
(permalink)
Version 0.3.5.1 BETA fixed this for me.
|
msyltek
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2018/12/13 10:05:42
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/01/09 11:57:33
(permalink)
I'm getting this issue on the power limit on version 0.3.11.0
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Precision X1 power limit not saved?
2019/01/09 12:12:17
(permalink)
I found not using the Slider and just typing in the Number then pressing the Enter Key the Click the Apply Button then Click the Save Button worked for me.
|
msyltek
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2018/12/13 10:05:42
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/01/09 13:13:32
(permalink)
|
msyltek
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2018/12/13 10:05:42
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/01/09 17:04:41
(permalink)
Yeah that worked at least for the one restart I did today, any clue how to make this option stick https://puu.sh/Cuh0h/d40c13ff1c.png? Looking for config files or something but no luck so far.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Precision X1 power limit not saved?
2019/01/09 19:16:25
(permalink)
Did you also save a Profile?
I DO NOT have PX1 startup with the OS so after I see my Desktop I then start PX1.
|
msyltek
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2018/12/13 10:05:42
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/01/11 17:49:39
(permalink)
At least when being opened on startup it's not saving any settings anymore.
|
tbwj21
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2007/08/05 12:58:40
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/02/16 15:28:18
(permalink)
None of the suggested fixes in this thread have worked for me. Whenever I restart X1 my power and temp limits are linked again and both are set to 130 and 88. I un-link them, set power to 100, leave temp limit at 88, hit apply, then save and finally quit out of X1. After restarting the application my power limit is back to 130, temp limit is still at 88, and the two are linked again.
On the other hand my fan settings do save, even though X1 does not properly display it. For some reason X1 will display my fans as being at 0% (stock GPU settings) after I restart the application, but by using HWINFO64 I can see that my fans are actually at 40% per my custom settings.
|
dc8flyer
SSC Member
- Total Posts : 558
- Reward points : 0
- Joined: 2016/02/23 00:10:47
- Status: offline
- Ribbons : 7
Re: Precision X1 power limit not saved?
2019/02/18 03:21:55
(permalink)
Select the setup button in upper right corner. Under General Tab make sure "Apply previous settings on load" is checked.
2009 Alienware Aurora x58 i7 990x oc to 4.14 Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors RTX 2080ti EVGA Black XC oc 1250/160 with 456.55 CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory 2TB 860evo SSD Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow Windows 10 - always the latest
|
tbwj21
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2007/08/05 12:58:40
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/02/18 13:06:11
(permalink)
That option is checked, along with "Start with OS" and "Start minimized". Oddly, after toggling these options off and then back on, they are now no longer working at all. I currently have all three of those options checked and now X1 doesn't start with Windows anymore. I have tried reinstalling the program, but these issues persist.
|
dc8flyer
SSC Member
- Total Posts : 558
- Reward points : 0
- Joined: 2016/02/23 00:10:47
- Status: offline
- Ribbons : 7
Re: Precision X1 power limit not saved?
2019/02/18 15:59:56
(permalink)
Uninstall completely, DDU or any other software to clean out registry, etc.. Look through windows file for anything related to PX1 and delete. Then install an earlier version perhaps two or three back and work from there. Just a suggestion.
2009 Alienware Aurora x58 i7 990x oc to 4.14 Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors RTX 2080ti EVGA Black XC oc 1250/160 with 456.55 CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory 2TB 860evo SSD Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow Windows 10 - always the latest
|
pal9000
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2018/10/24 10:52:11
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/05/02 05:01:19
(permalink)
I've had this problem despite multiple version changes, windows installations, hardware changes, etc. Best solution I've found so far is to completely uninstall the program. Then I restart and install afterburner. Everything seems to be working now.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Precision X1 power limit not saved?
2019/05/02 06:00:36
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Precision X1 power limit not saved?
2019/05/02 10:03:29
(permalink)
☄ Helpfulby Cool GTX 2019/05/11 08:51:05
Under NVIDIA's New Drivers with added Security you will need to Right Click on PX1 and Select Run as administrator to fix this. Or Setup your Shortcut to Run as administrator.
post edited by bcavnaugh - 2019/05/13 08:15:35
|
bhindu
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2010/07/12 00:41:36
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/05/11 08:03:45
(permalink)
bcavnaugh
Under NVIDIA's New Drivers with added Security you will need to Right Click on PX1 and Select Run as administrator to fix this.
Or Setup your Shortcut to Run as administrator.
Thanks, this fixed my issue which was the same as the OP.
|
Moofers
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2014/06/13 07:38:04
- Status: offline
- Ribbons : 0
Re: Precision X1 power limit not saved?
2019/05/13 04:58:12
(permalink)
Ah yes sorry didn't see the last post, that was what I figured out too.
post edited by Moofers - 2019/05/13 05:03:29
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: Precision X1 power limit not saved?
2019/05/16 05:14:24
(permalink)
I've been meaning to say something for a while but I when I apply my power target to 124% it keeps slipping back to 123%. Not sure if 1% is anything meaningful though...
 Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Precision X1 power limit not saved?
2019/05/16 07:08:28
(permalink)
Just type in 124 and press the enter key then click apply and then save.
|