EVGA

Hot!Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR

Page: < 1234 > Showing page 2 of 4
Author
williamcll
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2019/04/16 09:04:23
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 09:06:29 (permalink)
I've tried the BIOS, it's even worse than the normal one for some reason, the clock drops back down to 1800 compared to 2000 on normal BIOS and the fan is stuck at 2200 rather than 3200 for on normal BIOS, plus I cannot change the LED colors. Anyone got a solution?
#31
GTXJackBauer
CLASSIFIED ULTRA Member
  • Total Posts : 7193
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 40
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 10:02:21 (permalink)
williamcll
I've tried the BIOS, it's even worse than the normal one for some reason, the clock drops back down to 1800 compared to 2000 on normal BIOS and the fan is stuck at 2200 rather than 3200 for on normal BIOS, plus I cannot change the LED colors. Anyone got a solution?




You'll have to reflash back to the original BIOS.


leghmoh
 
By the way can someone please tell me which one is the main displayport on the Black edition?
Thanks



My multi screen showed me the first DP from the Top was #1 and went from there.  Best way to see what you're seeing while keeping tabs which DP is connected in the back of the GPU is to go into Nvidia's Control Panel ---> Display ---> Identify Displays will tell you which number your mutli screen setup is. 
 
If this is just for a single screen, just plug it into the DP closes to the top of the GPU, I don't really think it matters much tbh.

Use this Associate Code at your checkouts, to get 5%-10% discounts on all your EVGA purchases:
LMD3DNZM9LGK8GJ
Use this Rewards Code below when registering your EVGA products. 
(Make sure to upload your invoice.)
#32
Sajin
EVGA Forum Moderator
  • Total Posts : 39485
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 196
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 10:05:55 (permalink)
WinterWarrior
Found a 124% BIOS
 
From Techpowerup - /vgabios/208761/208761
 
I've installed it and so far it working.
Its unverified and appears to be from a Palit Card.


The reason that one is working is because the palit card is also a non-a chip.



Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#33
slayer6288
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2009/03/08 01:54:28
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 10:18:27 (permalink)
So then should I not flash this when I get home from work? Whenever I do the nv oc scanner the limiting factor for TDP power limit and I was hoping this would give me a slight increase or so but the guy above said his clocks throttle with it on his black edition. Anyone else try this bios yet and have results? Bad or good?
#34
GTXJackBauer
CLASSIFIED ULTRA Member
  • Total Posts : 7193
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 40
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 10:21:46 (permalink)
slayer6288
So then should I not flash this when I get home from work? Whenever I do the nv oc scanner the limiting factor for TDP power limit and I was hoping this would give me a slight increase or so but the guy above said his clocks throttle with it on his black edition. Anyone else try this bios yet and have results? Bad or good?



I mean it all depends on your silicon.  Some might accept it while other's wont but the thing is for me personally, it's not worth trying in case somehow you brick your GPU by accident flashing to a non OEM BIOS which would void your warranty so knowing these things cost $1K+ a pop, I feel it's not worth it but that's all up to you.

Use this Associate Code at your checkouts, to get 5%-10% discounts on all your EVGA purchases:
LMD3DNZM9LGK8GJ
Use this Rewards Code below when registering your EVGA products. 
(Make sure to upload your invoice.)
#35
Sajin
EVGA Forum Moderator
  • Total Posts : 39485
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 196
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 10:40:37 (permalink)
slayer6288
So then should I not flash this when I get home from work? Whenever I do the nv oc scanner the limiting factor for TDP power limit and I was hoping this would give me a slight increase or so but the guy above said his clocks throttle with it on his black edition. Anyone else try this bios yet and have results? Bad or good?


The scanner will still say power is the limiting factor after flashing the vbios. The reason I say that is because even my 2080 ti's that have a 380w vbios loaded to them get the power limit message inside the scanner also.

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#36
williamcll
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2019/04/16 09:04:23
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 18:49:14 (permalink)
Flashed the backup rom and everything is back to normal. Are there any other BIOS I could try?
#37
slayer6288
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2009/03/08 01:54:28
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 20:03:41 (permalink)
The new bios was slightly worse for me I did not have the issues you had droppng to 1800 but my score was slightly lower in 3dmark with it and it did not llow any higher oc compared to stock
#38
WinterWarrior
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2019/03/10 16:09:34
  • Location: Wellington, New Zealand
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 21:20:40 (permalink)
Interesting too see all the issue other people are having.
Mine so far is working fine and all my DP are working.
 
I might not be noticing some other fan issues since I've been running mine under water.
 
I've noticed some games like BF5 the core clock will stick too 2025 MHz and not fluctuate much.
Other games like Division 2 I'll get around 1950 MHz average with the clock jumping between 1900 MHz and 2025 Mhz.
 
Attached are three 3DMark Scores...
1st one if from a liquid metal shunt mod / 2nd is from normal 112% bios / 3rd is from the 124% bios
 
Not a bad little bump, since I know what the card is capable of when power was not the issue, I'm happy with the 124% power.
 
I'd still love to have that 144% Kingpin bios work on this card, but that's a pipe dream.
post edited by WinterWarrior - 2019/04/16 21:27:29

Attached Image(s)

#39
nofearek9
iCX Member
  • Total Posts : 362
  • Reward points : 0
  • Joined: 2010/11/16 03:03:33
  • Location: Cyprus
  • Status: offline
  • Ribbons : 7
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 22:21:58 (permalink)
nice results 
is similar mod for the 2070 users ?
having EVGA GeForce RTX 2070 XC GAMING can i update bios with the one from ultra gaming or even FTW ?

Asus Rampage IV Black Edition,Intel Xeon e5-1680v2@4,7ghz,Corsair XMS3 64GB DDR3(8x8),Samsung 950 PRO 256GB,EVGA GeForce RTX 2070 XC GAMING 8GB,Lian Li PC-60FNWB ,Corsair Gold AX750PSU,Noctua NH-D15 .
Asus Rampage III Gene,Intel Xeon X5660@ 4,5ghz,Corsair XMS3 24GB DDR3(3x8),Samsung 950 PRO 256GB.
Register your evga products           Buy evga products with discount
#40
leghmoh
New Member
  • Total Posts : 43
  • Reward points : 0
  • Joined: 2007/04/20 05:44:46
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/16 23:34:01 (permalink)
@ WinterWarrior thanks for the feedback, I will flash mine as soon as I get back to home ( 2 weeks ) this card really need a bios update with 124 % power.
 
Please EVGA don't let us down, we need a Bios update for 2080 ti Black Edition 11G-P4-2281-KR with 320 watt power target.
#41
williamcll
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2019/04/16 09:04:23
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 00:17:18 (permalink)
WinterWarrior
Interesting too see all the issue other people are having.
Mine so far is working fine and all my DP are working.
 
I might not be noticing some other fan issues since I've been running mine under water.
 
I've noticed some games like BF5 the core clock will stick too 2025 MHz and not fluctuate much.
Other games like Division 2 I'll get around 1950 MHz average with the clock jumping between 1900 MHz and 2025 Mhz.
 
Attached are three 3DMark Scores...
1st one if from a liquid metal shunt mod / 2nd is from normal 112% bios / 3rd is from the 124% bios
 
Not a bad little bump, since I know what the card is capable of when power was not the issue, I'm happy with the 124% power.
 
I'd still love to have that 144% Kingpin bios work on this card, but that's a pipe dream.


Problem is with stock BIOS you can remain on 1950-2050 Mhz even with 112% power so the palit BIOS isn't working at all.
#42
TwoEvilOne
iCX Member
  • Total Posts : 392
  • Reward points : 0
  • Joined: 2018/06/12 10:55:57
  • Location: NW Ohio
  • Status: offline
  • Ribbons : 2
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 00:22:52 (permalink)
Mrshawn77
Hi, i purchased a 2080 ti black edition, this is a good card, but, the power target is locked at 112%, only 297 watts max ! i can't Overclock as i want, do you know if a new bios coming for the black edition ? Thx all and sorry for my bad english.


check out TechPowerUp Gpu-Z for bios for the Evga 2080 ti Black https://www.techpowerup.com/gpu-specs/evga-rtx-2080-ti-black.b6366 it will show you
other cards based on your reference board.

My 3DMark HALL OF FAME high scores on Nvidia GeForce RTX EVGA 2080 Ti K|NGP|N Hybrid: Port Royal HOF 10856,
Time Spy v1.0 HOF 16961, Fire Strike Extreme v1.1 HOF 18976, Fire Strike Ultra v1.1 HOF 10049, Superposition v1.1 4K 14838;  Superposition v1.1 1080P Medium 30822; Superposition v1.1 1080P High 23905; Superposition v1.1 1080P Extreme 10802; Superposition v1.1 8K 6397.
<-- over here go to my Mods Rig in red, and +1 rate it and leave a comment and ill +1 you back, Thanks.
#43
williamcll
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2019/04/16 09:04:23
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 02:56:09 (permalink)
TwoEvilOne
Mrshawn77
Hi, i purchased a 2080 ti black edition, this is a good card, but, the power target is locked at 112%, only 297 watts max ! i can't Overclock as i want, do you know if a new bios coming for the black edition ? Thx all and sorry for my bad english.


check out TechPowerUp Gpu-Z for bios for the   it will show you
other cards based on your reference board.


The table seems to show every card ever.
#44
WinterWarrior
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2019/03/10 16:09:34
  • Location: Wellington, New Zealand
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 03:09:07 (permalink)
williamcll
WinterWarrior
Interesting too see all the issue other people are having.
Mine so far is working fine and all my DP are working.
 
I might not be noticing some other fan issues since I've been running mine under water.
 
I've noticed some games like BF5 the core clock will stick too 2025 MHz and not fluctuate much.
Other games like Division 2 I'll get around 1950 MHz average with the clock jumping between 1900 MHz and 2025 Mhz.
 
Attached are three 3DMark Scores...
1st one if from a liquid metal shunt mod / 2nd is from normal 112% bios / 3rd is from the 124% bios
 
Not a bad little bump, since I know what the card is capable of when power was not the issue, I'm happy with the 124% power.
 
I'd still love to have that 144% Kingpin bios work on this card, but that's a pipe dream.


Problem is with stock BIOS you can remain on 1950-2050 Mhz even with 112% power so the palit BIOS isn't working at all.



You must have a golden chip then. Mine was hovering around the 1900 MHz range at best when I had 112%
 
I've just done a OC Scanner run and now my clock for Division 2 are running around 2010 MHz to 2040 MHz.
 
3DMark scores haven't improved much though.
 
 
 
Still need to check if BF5 is stable as that game seems to push the clocks higher than most and tends to crash.

Attached Image(s)

#45
slayer6288
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2009/03/08 01:54:28
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 08:05:02 (permalink)
The new bios doesn't really open up my card at all. It is more of less the same with the 112% bios vs the new 124% bios. Nothing really changes on available headroom.
#46
slayer6288
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2009/03/08 01:54:28
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 12:20:06 (permalink)
Also after flashing the new bios windows acted like a completely different 2080ti was installed I am guessing this is normal because it is a palit bios?
#47
Sajin
EVGA Forum Moderator
  • Total Posts : 39485
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 196
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 12:42:09 (permalink)
slayer6288
Also after flashing the new bios windows acted like a completely different 2080ti was installed I am guessing this is normal because it is a palit bios?


Yes.

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#48
Sajin
EVGA Forum Moderator
  • Total Posts : 39485
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 196
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 12:52:14 (permalink)
nofearek9
nice results 
is similar mod for the 2070 users ?
having EVGA GeForce RTX 2070 XC GAMING can i update bios with the one from ultra gaming or even FTW ?


Ultra gaming yes. FTW no.

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#49
WinterWarrior
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2019/03/10 16:09:34
  • Location: Wellington, New Zealand
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 13:53:55 (permalink)
slayer6288
The new bios doesn't really open up my card at all. It is more of less the same with the 112% bios vs the new 124% bios. Nothing really changes on available headroom.


Did you do a before and after benchmarks?
 
I didn't overclock my card any higher but my average boost clocks did climb by about 100 MHz to 150 MHz.
Even without overclocking this card was starved for power, you should see a difference between 112% and 124% in the boost numbers even without overclocking.
#50
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 5876
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 19
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 15:20:56 (permalink)
Higher sustained clocks is what one should be shooting for with a higher power bios. Chip will limit overclocking but the power limit will cause clock dancing <-- I like to call it.

Higher power should keep your clocks stable but the high temps will drop your clock over time anyways.

Intel i9 9900K @ 5.2Ghz Dual Custom Water Loops.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N   
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Tower 900 w/ 2x EK D5 pump/Res combo, 2 EK XE 480 rads.
#51
williamcll
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2019/04/16 09:04:23
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 19:50:05 (permalink)
WinterWarrior
slayer6288
The new bios doesn't really open up my card at all. It is more of less the same with the 112% bios vs the new 124% bios. Nothing really changes on available headroom.


Did you do a before and after benchmarks?
 
I didn't overclock my card any higher but my average boost clocks did climb by about 100 MHz to 150 MHz.
Even without overclocking this card was starved for power, you should see a difference between 112% and 124% in the boost numbers even without overclocking.


2000 MHz oh default BIOS and 1800Mhz on the Alternate BIOS, something else is causing issues.
AHowes
Higher sustained clocks is what one should be shooting for with a higher power bios. Chip will limit overclocking but the power limit will cause clock dancing <-- I like to call it.

Higher power should keep your clocks stable but the high temps will drop your clock over time anyways.

unfortunately, the 100% fan with the alternate BIOS only goes up to 2200RPM so cooling is restricted.
#52
nofearek9
iCX Member
  • Total Posts : 362
  • Reward points : 0
  • Joined: 2010/11/16 03:03:33
  • Location: Cyprus
  • Status: offline
  • Ribbons : 7
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/17 22:33:43 (permalink)
Sajin
nofearek9
nice results 
is similar mod for the 2070 users ?
having EVGA GeForce RTX 2070 XC GAMING can i update bios with the one from ultra gaming or even FTW ?


Ultra gaming yes. FTW no.


thanks those 3 fan dont think will be compatible with my card
tryed ultra and worked just fine got that little extra boost.
thanks.

Asus Rampage IV Black Edition,Intel Xeon e5-1680v2@4,7ghz,Corsair XMS3 64GB DDR3(8x8),Samsung 950 PRO 256GB,EVGA GeForce RTX 2070 XC GAMING 8GB,Lian Li PC-60FNWB ,Corsair Gold AX750PSU,Noctua NH-D15 .
Asus Rampage III Gene,Intel Xeon X5660@ 4,5ghz,Corsair XMS3 24GB DDR3(3x8),Samsung 950 PRO 256GB.
Register your evga products           Buy evga products with discount
#53
slayer6288
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2009/03/08 01:54:28
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/18 06:08:35 (permalink)
With the original bios I am able to get my card to 775 on mem 800 had weird random stutter and my card in games stays locked at 2010 for 98% of the time sometimes going to 1995 or 2025 and only hits 71-72 celc in gaming so Im pretty happy since i paid 300 dollars less for this than most and it is slightly above avg for one of the more expensive versions comparably.
#54
WinterWarrior
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2019/03/10 16:09:34
  • Location: Wellington, New Zealand
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/18 19:15:29 (permalink)
Finally got round to testing BF5 last night and I'm getting between 2070 MHz and 2100 MHz with no issue after about 3 hours play time.
 
Wonder why the game engines push the card so differently in term of clocks since Division 2 is running around 2010 MHz to 2040 MHz using the same overclock.
 
Anyway looking at this BIOS and from what I've read from the posts here, I can only recommend this BIOS to people who has replaced their cooling with a third party option as this 124% BIOS reduces the max speed your fans will run.
To be honest its not that surprising as it's probably the main difference between the Palit card and this EVGA card.
#55
Sajin
EVGA Forum Moderator
  • Total Posts : 39485
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 196
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/18 20:18:44 (permalink)
nofearek9
Sajin
nofearek9
nice results 
is similar mod for the 2070 users ?
having EVGA GeForce RTX 2070 XC GAMING can i update bios with the one from ultra gaming or even FTW ?


Ultra gaming yes. FTW no.


thanks those 3 fan dont think will be compatible with my card
tryed ultra and worked just fine got that little extra boost.
thanks.


No problem.

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#56
GTXJackBauer
CLASSIFIED ULTRA Member
  • Total Posts : 7193
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 40
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/18 20:43:29 (permalink)
WinterWarrior
Finally got round to testing BF5 last night and I'm getting between 2070 MHz and 2100 MHz with no issue after about 3 hours play time.
 
Wonder why the game engines push the card so differently in term of clocks since Division 2 is running around 2010 MHz to 2040 MHz using the same overclock.
 
Anyway looking at this BIOS and from what I've read from the posts here, I can only recommend this BIOS to people who has replaced their cooling with a third party option as this 124% BIOS reduces the max speed your fans will run.
To be honest its not that surprising as it's probably the main difference between the Palit card and this EVGA card.



I'd consider this flash if I had two BIOS options to keep an OEM and 3rd party on the other or just get an official one from EVGA.
 
I must say, those are some great numbers you are getting.  If I had to guess, EVGA won't do this because it will eat up on their other SKUs.  Don't think PALIT has that many SKUs hence seeing the 124%'er me thinks.

Use this Associate Code at your checkouts, to get 5%-10% discounts on all your EVGA purchases:
LMD3DNZM9LGK8GJ
Use this Rewards Code below when registering your EVGA products. 
(Make sure to upload your invoice.)
#57
ZeusGamer
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2015/03/02 19:00:43
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/19 17:58:56 (permalink)
Stock BIOS here. I have a Hybrid cooler on and 147 on core clock and 1100 on memory clock.
The card sustains a 1900+ core clock at all times. But doesn't reach 2 GHz at all. Very power limited indeed.

i9-9900K @ 5.1 GHz
RTX 2080 Ti Black Edition @ 1.9 GHz
#58
Cuongpn
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2018/11/30 07:55:41
  • Location: Houston, TX
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/20 14:27:40 (permalink)
Thanks for the great news, will try it tonight
#59
leghmoh
New Member
  • Total Posts : 43
  • Reward points : 0
  • Joined: 2007/04/20 05:44:46
  • Status: offline
  • Ribbons : 0
Re: Power Target, A new bios for 2080 ti Black ? 11G-P4-2281-KR 2019/04/22 02:56:14 (permalink)
Cuongpn
Thanks for the great news, will try it tonight

The great news will be when we a get the official Bios from EVGA, with 320 watt power target or even 310 watt is fine. .
#60
Page: < 1234 > Showing page 2 of 4
Jump to:
  • Back to Mobile