I like this forum there is allot of people with crazy PC's to talk to. I don't get to talk to many people about computer's, but here I do.

 
NOhara24----------GTX 680(x1)-------2063
  

OP updated. GJ boys!

Btw, what do some of you single 680 guys have your offsets at? I've got +132% +155 +460

bullet0801

Update please! :)
bullet0801-----GTX 660 TI(x1)-------1619

I don't know how many more points I can squeeze out of this card! OP, great job on taking over #1 in the 660's by a nice lead.

I've even spent some time overclocking my CPU further. Stable at 4.8ghz now, didn't improve the score any. Before this it was at 4.5ghz. I have seen a couple people say that a CPU overclock further increased their score, but I wonder if there was some kind of bottleneck in their setups.

I only have a 955BE @ 4.2ghz. I don't think the processor is what's bottlenecking you. Do you happen to have a 3dmark11 or 3dmark13 score I can look at? I can compare your FPS to mine and see if it's just the GPU, or CPU that's bottlenecking. I think the 2500k is faster then the 955BE... I wish I could get my processor stable at 4.5 but even at 4.3 core #2 fails after 45 mins... And that's with 1.55v, maximum voltage this CPU can take.
 

iiDeadSeriousii 

Finally got my i7 3770k and my score jumped up 600 points! Originally had 1425 and now I've got this: 

iideadseriousii------------(680)-------2005 

 
 
What processor did you have before?

Yea your Physx test smeared mine by 12 fps lmfao. That's how big the gap is between your processor and mine.
 
Yours: 26.9704704 FPS
 
Mine: 14.1 FPS

bullet0801

Baltothewolf

Yea your Physx test smeared mine by 12 fps lmfao. That's how big the gap is between your processor and mine.

Yours: 26.9704704 FPS

Mine: 14.1 FPS

Pushing for 5.0ghz on CPU, but will need a new cooler first! :)

Mind sharing your 660's OC settings when benching? Curious to see how they compare to mine.

I think I got a pass in on 1280 core 3700 mem... Was it 1280... It could have been 1293... I think it was 1280 though.

That's it for me. I had to push 1.6v just to get 4.4ghz to run, and that's .045v over the maximum (max is 1.55v). You gotta know where your limits are, I don't want to push 1.65 and blow this CPU to kingdom come. Anyway, my GPU can do runs at 1293 btw Bullet.
On a side note, I'm extremely impressed with my H80... At 1.48v my CM EVO used to get in the upper 70's low 80's after 10 mins of P95... This H80 doesn't go over 60. At 1.5, forget it, EVO was seeing high 80's, H80 doesn't go over 62C. Impressive. Money well spent :p.

Balto I was using an FX-6200 with an ASUS Sabertooth and even at 4.7ghz it was obviously bottlenecking me. Just made the switch over to everything in my sig.

Baltothewolf

iiDeadSeriousii

Balto I was using an FX-6200 with an ASUS Sabertooth and even at 4.7ghz it was obviously bottlenecking me. Just made the switch over to everything in my sig.

Oh I see! Well ty for the input. I'm probably going to grab the 4570k (Assuming they call it that with haswell) and another MSI 660Ti PE when I start working this job. I'll probably see a nice improvement in FPS.

 
I debated for a long time whether I would wait for Haswell but decided against it, this FX was holding me back too much to resist Microcenter's cheap prices.

When I upgrade it'll probably be for Maxwell so at least I can do all components together.

 
Updated with new driver + more OC
 
chiptouz----------GTX 670(x1)-------1954

Baltothewolf

iiDeadSeriousii

Baltothewolf

iiDeadSeriousii

Balto I was using an FX-6200 with an ASUS Sabertooth and even at 4.7ghz it was obviously bottlenecking me. Just made the switch over to everything in my sig.

Oh I see! Well ty for the input. I'm probably going to grab the 4570k (Assuming they call it that with haswell) and another MSI 660Ti PE when I start working this job. I'll probably see a nice improvement in FPS.

I debated for a long time whether I would wait for Haswell but decided against it, this FX was holding me back too much to resist Microcenter's cheap prices.

When I upgrade it'll probably be for Maxwell so at least I can do all components together.

Yea the urge for me to go Ivy is really strong but, I will wait because in the long run it will be worth it...

ivory is a descent chip, just a lil warm if ocing

glw165

Baltothewolf

iiDeadSeriousii

Baltothewolf

iiDeadSeriousii

Balto I was using an FX-6200 with an ASUS Sabertooth and even at 4.7ghz it was obviously bottlenecking me. Just made the switch over to everything in my sig.

Oh I see! Well ty for the input. I'm probably going to grab the 4570k (Assuming they call it that with haswell) and another MSI 660Ti PE when I start working this job. I'll probably see a nice improvement in FPS.

I debated for a long time whether I would wait for Haswell but decided against it, this FX was holding me back too much to resist Microcenter's cheap prices.

When I upgrade it'll probably be for Maxwell so at least I can do all components together.

Yea the urge for me to go Ivy is really strong but, I will wait because in the long run it will be worth it...

ivory is a descent chip, just a lil warm if ocing

 
Just de-lid the sucker and be done with the heat. 
 
Currently running 5.0 Ghz on my 3770K (Watered and delidded) and it never gets above 70C when folding (Where Voltage is just a tad higher than normal use, as I dont want to loose out on a work-unit). 

please update my score please.
WallyKilla
660 ti x 1
score= 1587

It's not the heat that bothers me. It's the fact that if I just wait a few months, I can spend the same money and get 10% more performance. 2-5 Month wait is worth it.