EVGA

Hot!Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, Kingpin)

Page: 1234 > Showing page 1 of 4
Author
Dabadger84
CLASSIFIED Member
  • Total Posts : 3396
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
2021/05/10 19:42:31 (permalink)
So you can use whatever metrics ya like to show off temperatures etc.  Feel free to post up HydroCopper & other blocks results as well!  System pictures & results are all encouraged to be shown off :-P
 
My initial numbers are with Port Royal Stress Test, because I find it's a decent enough indication of how how the card would run while gaming in most cases.  I plan to add Tomb Raider numbers as well as some others like Time Spy Stress Test later on down the road.
 
 
 
Port Royal Stress Test takes about 36 minutes to complete, it is a 20-loop run of Port Royal, designed to "stress test" your GPU's settings and see if they're stable or not based on comparing frame times & frame rates across the 20 runs & checking for consistency.
 

 
This is run with the GPU set at 2160MHz @ 1068mV (so an undervolt OC) & with the VRAM/memory at +1000, which is 24/7 usage stable, I've gamed on those settings extensively prior to installing the block.  Maximum temperatures seen during the run:
 

 
Also got these numbers so far in benchmarkos:
 
Port Royal: https://www.3dmark.com/pr/1028885 15668

 
Time Spy: 21919 https://www.3dmark.com/spy/20183189

 
Time Spy Extreme: 11790 https://www.3dmark.com/spy/20183335

 
 
Planning to post up Tomb Raider & Metro Exodus Enhanced Edition temp & power draw numbers sometime soon.
 
 
Oh and since pictures of the setup are appreciated & encouraged:
 


Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

#1

113 Replies Related Threads

    rtgoad
    New Member
    • Total Posts : 22
    • Reward points : 0
    • Joined: 2019/05/01 22:50:14
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/10 21:01:07 (permalink)
    Just got my block on... 60-70 gpu die temp on startup, black screen 30 seconds after windows starts. 
     
    Doesn't appear to be a loop issue, and I've tried reseating the pcb on the block twice. Not sure where to go from here, unfortunately.  
    #2
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 00:07:07 (permalink)
    rtgoad
    Just got my block on... 60-70 gpu die temp on startup, black screen 30 seconds after windows starts. 
     
    Doesn't appear to be a loop issue, and I've tried reseating the pcb on the block twice. Not sure where to go from here, unfortunately.  




    Last person I saw having high temps was a result of the screws not being fully tightened, specifically the 4 right around the GPU die.  Are you using the stock thermal paste application or doing your own?

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #3
    kissTheApex
    SSC Member
    • Total Posts : 569
    • Reward points : 0
    • Joined: 2021/02/22 15:30:59
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 03:16:40 (permalink)
    What case do you have badger? (On mobile, can’t see signatures if it was there)
    #4
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 03:33:43 (permalink)
    kissTheApex
    What case do you have badger? (On mobile, can’t see signatures if it was there)



    Case isn't in my signature but it is in my ModRigs: https://www.modsrigs.com/detail.aspx?buildid=42891
     
    It's a Thermaltake View 91 AKA one of the most overpriced, heavy, and ridiculous cases ever made outside of the likes of CaseLabs & Danger Den back in the day.  It's lorg & chonk, but it's exactly what I wanted... both a display piece, and a large area to work in easily, fits radiators with room to spare.

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #5
    kissTheApex
    SSC Member
    • Total Posts : 569
    • Reward points : 0
    • Joined: 2021/02/22 15:30:59
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 03:43:35 (permalink)
    Dabadger84
    ….. and a large area to work in easily, fits radiators with room to spare.


    Yeah, that was the part intrigued me. I keep seeing a 480mm rad in the front with room to save and was thinking “what the h is that case!?” 😂

    Im going between Corsair 500se with 3 LL 120 fans or the known and trusted LL 011.

    Even though LL is smaller, it seems to have more room for fans/radiators.
    #6
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 04:26:12 (permalink)
    kissTheApex
    Dabadger84
    ….. and a large area to work in easily, fits radiators with room to spare.


    Yeah, that was the part intrigued me. I keep seeing a 480mm rad in the front with room to save and was thinking “what the h is that case!?” 😂

    Im going between Corsair 500se with 3 LL 120 fans or the known and trusted LL 011.

    Even though LL is smaller, it seems to have more room for fans/radiators.



    Yeah with the View 91, I believe the front can technically fit a 4x140mm radiator but that would restrict what you can fit on the top.  If you move the 480mm on the front all the way down you can fit 480s in both top & front.   Even with my 480mm being a 60mm thick monster-sized rad, it still looks relatively "normal" sized in the case because it's so huge.

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #7
    rtgoad
    New Member
    • Total Posts : 22
    • Reward points : 0
    • Joined: 2019/05/01 22:50:14
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 06:24:19 (permalink)
    Dabadger84
    rtgoad
    Just got my block on... 60-70 gpu die temp on startup, black screen 30 seconds after windows starts. 
     
    Doesn't appear to be a loop issue, and I've tried reseating the pcb on the block twice. Not sure where to go from here, unfortunately.  




    Last person I saw having high temps was a result of the screws not being fully tightened, specifically the 4 right around the GPU die.  Are you using the stock thermal paste application or doing your own?


    Think you’re right. I Took the card apart again after getting some sleep. I appear to be getting solid contact everywhere except to the die. Didn’t think i could make those 4 gpu screws any tighter but will give it another go.
    #8
    rtgoad
    New Member
    • Total Posts : 22
    • Reward points : 0
    • Joined: 2019/05/01 22:50:14
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 07:03:56 (permalink)
    Whoops ... Double post.
    post edited by rtgoad - 2021/05/11 07:05:10
    #9
    lobstar
    Superclocked Member
    • Total Posts : 201
    • Reward points : 0
    • Joined: 2007/03/05 13:08:02
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 09:38:34 (permalink)
    5950x, 3090 FTW3U (KPE520w bios).  Both under Optimus blocks. Ambient was 20.6C
    Port Royal: I scored 15 595 in Port Royal
    Time Spy (Gfx: 23191): I scored 21 861 in Time Spy
    It's the system in the blue EasyXL.

    post edited by lobstar - 2021/05/11 09:46:11

     
    #10
    Clovis559
    SSC Member
    • Total Posts : 524
    • Reward points : 0
    • Joined: 2020/09/18 13:53:08
    • Status: offline
    • Ribbons : 1
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 14:32:04 (permalink)
    lobstar
    5950x, 3090 FTW3U (KPE520w bios).  Both under Optimus blocks. Ambient was 20.6C
    Port Royal: I scored 15 595 in Port Royal
    Time Spy (Gfx: 23191): I scored 21 861 in Time Spy
    It's the system in the blue EasyXL.





    Love the [H]
    #11
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/11 16:09:17 (permalink)
    lobstar
    5950x, 3090 FTW3U (KPE520w bios).  Both under Optimus blocks. Ambient was 20.6C
    Port Royal: I scored 15 595 in Port Royal
    Time Spy (Gfx: 23191): I scored 21 861 in Time Spy
    It's the system in the blue EasyXL.





    I appreciate someone that has more monitor space than I do. lol Nice setup!
     
    Pro tip to get a boost out of your Port Royal score if you haven't tried it already, specifically before you run PR, set your main screen that it runs on to 2560 x 1440.  It rose my score by several hundred points - with the exact same settings - no idea why.  That's with the latest drivers too.

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #12
    lobstar
    Superclocked Member
    • Total Posts : 201
    • Reward points : 0
    • Joined: 2007/03/05 13:08:02
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/12 10:08:34 (permalink)
    Dabadger84
     
    Pro tip to get a boost out of your Port Royal score if you haven't tried it already, specifically before you run PR, set your main screen that it runs on to 2560 x 1440.  It rose my score by several hundred points - with the exact same settings - no idea why.  That's with the latest drivers too.

    I actually go all the way down to 1920x1080 60hz.  It's only a few points but points is points.  Also, thanks! Never planned on having over-under ultrawides but I have a moving company to thank for breaking my OG X34 so they replaced it with the newer 180hz version with HDR.  Then I fixed the old one lol.
    Clovis559
     
    Love the [H]

    I really wish the main page were still around ... 

     
    #13
    quick4dr
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2012/02/13 18:25:11
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/12 13:32:46 (permalink)
    What paste is everyone using I’m installing mine and trying to see if I should use the stuff on it or kpx…
    #14
    WhiteWolf92
    Superclocked Member
    • Total Posts : 129
    • Reward points : 0
    • Joined: 2021/05/08 07:26:55
    • Location: Second Planet from the Sun
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/12 14:54:07 (permalink)
    quick4dr
    What paste is everyone using I’m installing mine and trying to see if I should use the stuff on it or kpx…

    thermal grizzly kryonaut extreme 
    one of the best on the market but expensive AF
    #15
    onMute
    New Member
    • Total Posts : 84
    • Reward points : 0
    • Joined: 2017/03/12 06:19:41
    • Status: offline
    • Ribbons : 1
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/12 15:12:27 (permalink)
    The pre-applied TIM flaked off for me. Removed it all and used KPx.
    #16
    lobstar
    Superclocked Member
    • Total Posts : 201
    • Reward points : 0
    • Joined: 2007/03/05 13:08:02
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/12 16:00:59 (permalink)
    WhiteWolf92
    quick4dr
    What paste is everyone using I’m installing mine and trying to see if I should use the stuff on it or kpx…

    thermal grizzly kryonaut extreme 
    one of the best on the market but expensive AF

    Same. I got that little tub of it. I put that **** on everything.

     
    #17
    quick4dr
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2012/02/13 18:25:11
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/12 18:34:41 (permalink)
    I used kpx awesome temps now. I have a few 30g tubes for ln2 so I just use it.
    #18
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/13 00:08:49 (permalink)
    Y'all are making me wanna redo my paste, sthap it.  I don't think my temps would get much better though, considering I'm idling with GPU Temp showing 22-24C in HWInfo and my loads are only in the mid to high 40s if I'm pushing really high OCs or running really high stress games.

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #19
    EvgaUser2711201
    Superclocked Member
    • Total Posts : 169
    • Reward points : 0
    • Joined: 2017/10/18 14:31:43
    • Location: Canada
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/13 01:07:58 (permalink)
    Might as well start start posting. Heres my current setup.
    Nice builds here!
    Ran port r a few times with kingpin hybrid. Msi ab only at ~22c ambient.
    Installed the copper block tonight, ill get some scores this week.
    NVIDIA GeForce RTX 3090 video card benchmark result - AMD Ryzen 7 3800X,Micro-Star International Co., Ltd. MEG X570 GODLIKE (MS-7C34) (3dmark.com)
     

     
    Cheers!


    #20
    CptT95
    FTW Member
    • Total Posts : 1115
    • Reward points : 0
    • Joined: 2016/12/31 23:06:26
    • Status: online
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/13 05:19:02 (permalink)
    What all did you use 😒🤔
    Looks like a distro hub and external pumps and mini res? I'm intrigued 🤔
    #21
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/14 14:55:23 (permalink)
    https://twitter.com/TEAMEVGA/status/1392906537236975619
     
    Finally got the system featured in it's proper form as I wanted, thanks to eVGA for doing it and in particular Jacob for getting the social team on it, it was up within 3 hours of me asking him to see what he could do about getting the finished product featured instead of that rag-tag temporary POS they featured a week or so ago.

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #22
    kissTheApex
    SSC Member
    • Total Posts : 569
    • Reward points : 0
    • Joined: 2021/02/22 15:30:59
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/14 14:57:40 (permalink)
    Awesome! Congrats!
    #23
    howe10888
    New Member
    • Total Posts : 67
    • Reward points : 0
    • Joined: 2006/12/23 14:00:03
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/14 17:48:27 (permalink)
    @Dabadger84  Thanks for the advice and I broke 15.6K last night...
    Port Royal 15640 - https://www.3dmark.com/pr/1037914
    Time Spy Extreme 11753 - https://www.3dmark.com/spy/16692392
     
    #24
    lobstar
    Superclocked Member
    • Total Posts : 201
    • Reward points : 0
    • Joined: 2007/03/05 13:08:02
    • Status: offline
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/14 18:44:56 (permalink)
    EvgaUser2711201


    I have the same thermometer!

     
    #25
    CptT95
    FTW Member
    • Total Posts : 1115
    • Reward points : 0
    • Joined: 2016/12/31 23:06:26
    • Status: online
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/15 06:40:23 (permalink)
    Can someone tell me what all is going on in that loop lol, I'm an amateur at this still, and was wondering what I might do to my loop when I redo it to add my soon to be KP HC
    #26
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/15 20:17:24 (permalink)
    From the looks of it it's just external cooling, dual pump, bigarse radiator with some disconnects I think.  Fancy, but not outrageous.

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #27
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/17 23:20:43 (permalink)

     
    OSD showin' some numbers after being in Metro Exodus Enhanced Edition for about 45 minutes.  I'll post up another one later with the card running without the undervolt just to see what it runs.
    What's really impressive is if I turn VSync on, game runs smooth as butter, maxed out, AND GPU load is only in the 60-80% range most of the time:
     

     
     

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #28
    Dabadger84
    CLASSIFIED Member
    • Total Posts : 3396
    • Reward points : 0
    • Joined: 2018/05/11 23:49:52
    • Location: de_Overpass, USA
    • Status: offline
    • Ribbons : 10
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/18 05:12:23 (permalink)

     
    That's with VSync enabled for most of it (over 2 hours of play time), but running a pretty decent offset on the core.  Not bad for almost 500W of draw.

    Save up to 10% on eVGA.com, use my Associates Code: 47AQQ6KPU2IZNXY
    ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
    Specs:
    5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
    eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

    #29
    CptT95
    FTW Member
    • Total Posts : 1115
    • Reward points : 0
    • Joined: 2016/12/31 23:06:26
    • Status: online
    • Ribbons : 0
    Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/18 06:40:03 (permalink)
    Dabadger84

     
    That's with VSync enabled for most of it (over 2 hours of play time), but running a pretty decent offset on the core.  Not bad for almost 500W of draw.

    Sweeeeet
    Btw, mind pm me what all you used/did to the card, want to get memory down to those levels when I get my KP, let's spend even more money on a $2300 GPU XD
    Also what was that one guys heatsink from Amazon? Was the perfect size for the card
    post edited by CptT95 - 2021/05/18 06:42:29
    #30
    Page: 1234 > Showing page 1 of 4
    Jump to:
  • Back to Mobile