sedril
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2007/04/28 13:46:59
- Status: offline
- Ribbons : 0
Hi all,
I recently went with a 2080 super hydro copper to pair with my 9900k... The cpu is running at 5.1 and loving this setup...
Using the Precision software for some overclocking... A while back, I think it was my 970? I was able to overclock using software finding the most stable settings, then I was able to export the bios, edit it to the clock speeds I wanted and then reflash the card.... Just to avoid having to use software to OC...
Is that possible with the newer card? I can't seem to find much info on it.....
Thanks!
Asus Maximus ROG XI Apex I9 9900k 5.1Ghz 16GB G.skill DDR4 4133 Samsung 970 Pro 512GB EVGA GTX 2080 Super FTW3 HydroCopper 8GB Watercooled CPU & GPU two separate loops with triple radiators
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/03 20:35:15
(permalink)
No there is no bios editor for the 10 or 20 series Nvidia cards, I don't think we will ever see a bios editor for the Nvidia cards again in my opinion.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/03 21:09:29
(permalink)
Also, make sure to use the newer PX1 with this GPU and not the old Precision software.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
sedril
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2007/04/28 13:46:59
- Status: offline
- Ribbons : 0
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/03 21:14:49
(permalink)
Thanks both of you... That's what I was assuming... I do have the newest Precision X1 software... And while I don't mind it, I just prefer to be as minimalist as possible... So it was nice when we could edit the bios... Not a big loss, this card is awesome...
Asus Maximus ROG XI Apex I9 9900k 5.1Ghz 16GB G.skill DDR4 4133 Samsung 970 Pro 512GB EVGA GTX 2080 Super FTW3 HydroCopper 8GB Watercooled CPU & GPU two separate loops with triple radiators
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/03 23:40:18
(permalink)
sedril
Thanks both of you... That's what I was assuming... I do have the newest Precision X1 software... And while I don't mind it, I just prefer to be as minimalist as possible... So it was nice when we could edit the bios... Not a big loss, this card is awesome...
It's a great card. Enjoy it! 
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
spit051261
SSC Member
- Total Posts : 930
- Reward points : 0
- Joined: 2019/12/26 16:32:33
- Location: Australia
- Status: offline
- Ribbons : 4
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/04 01:01:43
(permalink)
Should be pretty easy to take your CPU up to 5.3 to try .
Gaming Rig - Lian Li Dynamic XL, MSI Z490 Godlike, i9 10900k (SP 88) delidded with Rockit IHS, G-Skill 4266 RAM 2X8 , MSI Z Trio 2080ti, Aorus RGB 360 AIO, EVO 2Tb 970 Plus Nvme,1600watt P2, Acer Predator X27 Monitor, K95 Platinum, G502,G560, ST100 RGB, Void RGB Elite.OC Rig - Lian Li T70, Apex XII , i9 10900k (SP 93) delidded with direct die cooling, G-Skill 4000 2X8 Cl15-16-16 RAM , Evga KPE 2080ti, 2 x 1 Tb Evo 970 Plus Nvme, Evga 1600watt P2, EXC 800 Chiller.
|
DeadlyMercury
iCX Member
- Total Posts : 422
- Reward points : 0
- Joined: 2019/09/11 14:05:07
- Location: Moscow
- Status: offline
- Ribbons : 14
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/04 02:14:23
(permalink)
You think so? :)
I had a 9900K that couldn't pass occt on frequencies higher than 4.8ghz ;)
It took 1.35v for 5ghz and either was hot like hell or not enought voltage to work stable. While my current 9900ks takes 1.25-1.27 for 5ghz and 1.35 is enough for 5.2ghz.
"An original idea. That can't be too hard. The library must be full of them." Stephen Fry
|
spit051261
SSC Member
- Total Posts : 930
- Reward points : 0
- Joined: 2019/12/26 16:32:33
- Location: Australia
- Status: offline
- Ribbons : 4
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/04 03:24:36
(permalink)
The k gets a lot hotter than the ks
My last k could easily hit 100 then throttle it's tits off .
Ks seems to run cooler,my one does any way.
Gaming Rig - Lian Li Dynamic XL, MSI Z490 Godlike, i9 10900k (SP 88) delidded with Rockit IHS, G-Skill 4266 RAM 2X8 , MSI Z Trio 2080ti, Aorus RGB 360 AIO, EVO 2Tb 970 Plus Nvme,1600watt P2, Acer Predator X27 Monitor, K95 Platinum, G502,G560, ST100 RGB, Void RGB Elite.OC Rig - Lian Li T70, Apex XII , i9 10900k (SP 93) delidded with direct die cooling, G-Skill 4000 2X8 Cl15-16-16 RAM , Evga KPE 2080ti, 2 x 1 Tb Evo 970 Plus Nvme, Evga 1600watt P2, EXC 800 Chiller.
|
DeadlyMercury
iCX Member
- Total Posts : 422
- Reward points : 0
- Joined: 2019/09/11 14:05:07
- Location: Moscow
- Status: offline
- Ribbons : 14
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/04 03:52:23
(permalink)
and sideeffect: while ks is actually k that was binned - k series is bad right now. because all good k are ks now :)
"An original idea. That can't be too hard. The library must be full of them." Stephen Fry
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/04 04:13:56
(permalink)
spit051261
Should be pretty easy to take your CPU up to 5.3 to try .
That's pretty much up there no matter what. For benchmarks if the silicon allows it, understandable but I think that will degradate the silicon as you'll need a good pump of voltage. Majority won't get those kind of numbers for the time being no matter what you're using it for.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
spit051261
SSC Member
- Total Posts : 930
- Reward points : 0
- Joined: 2019/12/26 16:32:33
- Location: Australia
- Status: offline
- Ribbons : 4
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/04 04:55:58
(permalink)
Just try using intel extreme tool.
Start at 5.3 @ 1.355 and every time it crashes , give it a fraction more until stable.
My one will run 5.3 @ 1.355 which isn't that high .
Try it , what do you have to lose .
I get 5.5 @ 1.435 just for reference.
Your CPU will throttle back or crash your pc before any damage occurs .
I wouldn't OC all the time , just for benchmarking .
You won't kill your cpu.
Up to you , your chip but it will go higher .
Gaming Rig - Lian Li Dynamic XL, MSI Z490 Godlike, i9 10900k (SP 88) delidded with Rockit IHS, G-Skill 4266 RAM 2X8 , MSI Z Trio 2080ti, Aorus RGB 360 AIO, EVO 2Tb 970 Plus Nvme,1600watt P2, Acer Predator X27 Monitor, K95 Platinum, G502,G560, ST100 RGB, Void RGB Elite.OC Rig - Lian Li T70, Apex XII , i9 10900k (SP 93) delidded with direct die cooling, G-Skill 4000 2X8 Cl15-16-16 RAM , Evga KPE 2080ti, 2 x 1 Tb Evo 970 Plus Nvme, Evga 1600watt P2, EXC 800 Chiller.
|
sedril
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2007/04/28 13:46:59
- Status: offline
- Ribbons : 0
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/04 09:36:58
(permalink)
I have my chip at 5.1 right now with 1.32v in bios... With LLC set at level 6
I will definitely push it harder as I have time... It runs pretty cool even at 5.1 so I know there's more room... I have the new EK waterblock on it with a triple radiator... Tons of fans in the case too so air flow isn't an issue...
So far tho, 5.1 serves my needs and then some, so I haven't really felt the need to push harder other than having fun fine tuning things... I've mainly been working on my RAM OC lately and tuning the timings.... My 9900k is awesome, so I don't think all the good ones got made into a KS....
Asus Maximus ROG XI Apex I9 9900k 5.1Ghz 16GB G.skill DDR4 4133 Samsung 970 Pro 512GB EVGA GTX 2080 Super FTW3 HydroCopper 8GB Watercooled CPU & GPU two separate loops with triple radiators
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Possible to edit bios on 2080 Super ftw3 hydrocopper?
2020/02/04 13:39:09
(permalink)
|