EVGA

Hot!Phanteks Shift mITX System

Author
Krzysztof47
iCX Member
  • Total Posts : 390
  • Reward points : 0
  • Joined: 2015/12/15 11:51:36
  • Location: USA
  • Status: offline
  • Ribbons : 11
2019/06/09 13:42:19 (permalink)
This is my backup air cooled system, it will feature a couple of cool parts and all Nidec Servo Fans of course System will be right behind my monitor.
 
Parts List:
 
(Updated 2/23/2020)
Mayflower Electronics ARC
EVGA RTX 2070 Super XC Hybrid
Z390 Asrock mITX Phantom Gaming AC
i5 9600K
2x T-Force Vulcan 2.5" SSD 500GB
2x Crucial P1 500GB NVMe
Grizzly NVMe Heatsink
T-Force Xtreem 4000MHz 16GB
Corsair SF600 Platinum PSU (Comes with sleeved black cables)
Phanteks Shift mITX Case, Black (Mesh Panels)
4x Gentle Typhoon 3000GT PWM
1x 92mm Gentle Typhoon (D0925C12B4ZSA29) (Also sleeved)
Noctua L9x65 CPU Cooler

 
post edited by Krzysztof47 - 2020/02/22 21:38:51

Attached Image(s)


3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

#1

24 Replies Related Threads

    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 21444
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 116
    Re: Phanteks Shift mITX System 2019/06/10 10:01:40 (permalink)
    Nice small factor build
     
    Your benchmark performance & Temp data will be interesting to see
     
     

    RTX Project EVGA X99 FTWK-5930K,EVGA2080Ti EVGA-1200P2  Nibbler EVGA X99 3-GPU Water Loop 1600P2  AIO Folding  1080Ti FTW3 Hybrid, 1200P
    Thank You for Your Support


    #2
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/06/11 15:20:39 (permalink)
    Cool GTX
    Nice small factor build
     
    Your benchmark performance & Temp data will be interesting to see
     
     


    Thank you!  Sure thing, curious myself to see what the performance and temps will be.

    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #3
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/06/13 17:39:31 (permalink)
    Back NVMe installed, the Grizzly heatsink manages to clear the PCB below which is good.

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #4
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 76577
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Europe
    • Status: offline
    • Ribbons : 70
    Re: Phanteks Shift mITX System 2019/06/14 08:34:04 (permalink)
    Small form factor builds are fun. I will enjoy watching this evolve. 

    Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

    Associate Code: H5U80QBH6BH0AXF



    #5
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/06/16 14:31:18 (permalink)
    rjohnson11
    Small form factor builds are fun. I will enjoy watching this evolve. 


    They sure are, thanks!  Got the second NVMe in, got a 2mm 3w/mk thermal pad on the bottom and a 1mm 6w/mk on top of the NVMe.  Waiting on the GPU and CPU now and should be good to go soon hopefully.
     

     
    post edited by Krzysztof47 - 2019/07/02 12:46:43

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #6
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/06/21 18:45:34 (permalink)
    Small update, just need to get a 9400F.  I got a CAT5e 90 degree RJ45 adapter, DP 90 degree adapter and USB 3.0 90 degree adapter to help with the IO cables up top.  I replaced all the stock pads on the 1660Ti XC Ultra with 12w/mk 2mm and 3mm Gelid Extreme thermal pads and the new thermal paste is NT H1.  These upgrades should help cool the card very well.  I got the 92mm Gentle Typhoon fan sleeved up and installed on the L9x65.  Dust covers have been installed all over the unused ports.  Hope to get this up and running soon.

     
    post edited by Krzysztof47 - 2019/07/09 19:24:41

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #7
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 76577
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Europe
    • Status: offline
    • Ribbons : 70
    Re: Phanteks Shift mITX System 2019/06/21 23:51:53 (permalink)
    Thanks for the update. Looking forward to seeing more updates as this mod progresses. 

    Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

    Associate Code: H5U80QBH6BH0AXF



    #8
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/07/02 12:38:07 (permalink)
    rjohnson11
    Thanks for the update. Looking forward to seeing more updates as this mod progresses. 


    Thanks!  Here is a small update, got the CZ backplate in and switched to a 32GB 3000MHz C16 kit of LPX.  Though with the choice of the 9400F I won't be able to use the XMP profiles unfortunately.

    post edited by Krzysztof47 - 2019/07/09 20:37:27

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #9
    Tribbs
    iCX Member
    • Total Posts : 311
    • Reward points : 0
    • Joined: 2009/02/13 07:42:36
    • Status: offline
    • Ribbons : 0
    Re: Phanteks Shift mITX System 2019/07/03 05:37:50 (permalink)
    Good stuff, I was between a shift X and O-11 Dynamic when doing mine, I still want to do a lil media center pc in the shift.  Keep us posted on temps when you get the parts in.  
    #10
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/07/04 19:52:16 (permalink)
    Tribbs
    Good stuff, I was between a shift X and O-11 Dynamic when doing mine, I still want to do a lil media center pc in the shift.  Keep us posted on temps when you get the parts in.  


    Thank you, and will do!

    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #11
    XrayMan
    EVGA Forum Moderator
    • Total Posts : 65150
    • Reward points : 0
    • Joined: 2006/12/14 22:10:06
    • Location: Santa Clarita, Ca.
    • Status: offline
    • Ribbons : 108
    Re: Phanteks Shift mITX System 2019/07/10 21:48:26 (permalink)
     
    Thanks for sharing.      

                My Affiliate Code: 8WEQVXMCJL
     
            Associate Code: VHKH33QN4W77V6A
     
                 
     
     
                      
     
     
     
              
     
       
     
               
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     



     
     
     
     
     
     &nbsp
    #12
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/07/18 15:25:22 (permalink)
    XrayMan
     
    Thanks for sharing.      


    Np, I ended up returning the L9x65 and getting a bequite! Shadow Rock LP which is a more significant CPU cooler, it barely fits, and just clears the VRM heatsink on the board.  I was going to have this unit up and running but, out of the blue the SF600 just died only after a couple hours of use, I filed for RMA and hope to get the unit back soon.

     

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #13
    revenantx02
    EGC Admin
    • Total Posts : 1386
    • Reward points : 0
    • Joined: 2010/06/01 10:49:31
    • Status: offline
    • Ribbons : 8
    Re: Phanteks Shift mITX System 2019/07/19 18:33:51 (permalink)
    Awesome build!
     
    I have the same case.
    Thanks for the idea of the 90' connectors for the mainboard io plate
    #14
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/07/20 10:05:46 (permalink)
    revenantx02
    Awesome build!
     
    I have the same case.
    Thanks for the idea of the 90' connectors for the mainboard io plate


    Thank you very much and NP!  Yeah I came up with the 90 degree connectors as the DP cable would not clear the top cover.  I got all the adapters off amazon.

    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #15
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 76577
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Europe
    • Status: offline
    • Ribbons : 70
    Re: Phanteks Shift mITX System 2019/07/21 02:19:48 (permalink)
    Hope the RMA turnaround time is quick. 

    Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

    Associate Code: H5U80QBH6BH0AXF



    #16
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/07/24 21:27:32 (permalink)
    rjohnson11
    Hope the RMA turnaround time is quick. 


    Thank you!  I get my RMA back today in fact, hope to get this up soon, waiting on 1x GT fan as the Shadow Rock uses a 120mm fan.  Also I will be replacing the thermal paste on this unit and my Primo system with HY P13 thermal paste, which comes in at 13.4w/mk beating out Grizzly Kryonaut on paper, should be very interesting to see how it compares to NT H1.

     

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #17
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 76577
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Europe
    • Status: offline
    • Ribbons : 70
    Re: Phanteks Shift mITX System 2019/07/27 02:11:01 (permalink)
    Thanks for the update

    Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

    Associate Code: H5U80QBH6BH0AXF



    #18
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/07/28 21:36:29 (permalink)
    rjohnson11
    Thanks for the update


    Got it up and running!  It is working well, the 1660Ti boosts all the way up 1980MHz, and gets pretty warm, but its an air cooled card, in a very compact case.  I recorded a max GPU temp of 80c, the CPU which is a i5 9400F clocked in at 4.1GHz on all cores according too MSi Afterburner, it hit a max temp of 49C so far, the Shadow Rock LP is doing great work along with the GT fans blasting everything with air.  RAM XMP is working great with the RAM at 3000MHz.  I am waiting on the HY P13 paste to come in so I can delid the 9400F and put a Copper IHS on it to try and shave off a few more C and a hopefully a few C off the GPU die with the paste.  Sorry for no photo's as I need to get some decent ones.  In August Phanteks told me they will have the Mesh upgrade panels for the Shift cases, and those should help a lot with airflow, as the sides and glass really inhibit fresh air from getting into the case.

    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #19
    EVGATech_GabrielT
    EVGA Tech Support
    • Total Posts : 1022
    • Reward points : 0
    • Joined: 2012/02/22 09:59:37
    • Status: offline
    • Ribbons : 1
    Re: Phanteks Shift mITX System 2019/07/31 14:55:39 (permalink)
    Very nice, Thanks for sharing. 

    You can try the steps that I have outlined for the reasons I have noted
    #20
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/10/20 15:28:24 (permalink)
    Sorry for the long delay, here is the setup!  System has been running great.  Been using it a lot as I switched my Primo system over to a Luxe 2.  Have 3X PC's on this desk
     

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #21
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2019/12/28 15:11:32 (permalink)
    Upgraded the GPU from a 1660Ti to a 2060, went with the PNY 2060 XLR8 OC single fan card, replaced the stock thermal pads and paste with 6-12w/mk thermal pads and 16w/mk Nanogrease for the die.  I designed a custom finned backplate for the GPU as it did not come with one.  Had it made out of 6061 aluminum, going to use 8w/mk 2mm Grizzly thermal pads with it.  I added some short fins to the backplate to add some surface area.  Also upgraded from the 9400F to the 9600K and to Teamgroup 4000MHz Xtreem ram, which can without a hitch on XMP hit 4000MHz, going to try and tighten the timings down.  Changed the Shadow Rock LP to a Scythe Big Shuriken 3.
     
     
     
     
    post edited by Krzysztof47 - 2019/12/29 11:43:34

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #22
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2020/01/06 19:49:40 (permalink)
    Its here!  2mm Grizzly pads underneath.
     


     
     

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #23
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2020/02/22 21:35:42 (permalink)
    Gave the system the Hybrid treatment.


    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #24
    Krzysztof47
    iCX Member
    • Total Posts : 390
    • Reward points : 0
    • Joined: 2015/12/15 11:51:36
    • Location: USA
    • Status: offline
    • Ribbons : 11
    Re: Phanteks Shift mITX System 2020/03/08 13:07:18 (permalink)
    Done for now.  Swapped the EK backplate for the aquacomputer kryographics one and installed a 6mmx70mm heatpipe in it, managed to knock 5c off the GPU load temps.

    Attached Image(s)


    3D Mark Fire Strike Ultra: http://www.3dmark.com/3dm/20432970?
    3D Mark Fire Strike Extreme: http://www.3dmark.com/3dm/20432775?
    3D Mark Fire Strike: http://www.3dmark.com/3dm/20432865?
    3D Mark Time Spy (Full Version): http://www.3dmark.com/3dm/20754407?

    #25
    Jump to:
  • Back to Mobile