Hopper64
SSC Member
- Total Posts : 735
- Reward points : 0
- Joined: 2012/01/02 09:16:21
- Status: offline
- Ribbons : 0
Asus Maximus Z690E i9 12900KS GSkill F5-6000U3636E16GX2-TZ5RK Samsung 980 Pro Corsair AX1600i Asus Strix 3090 OC EKWB Quantum Kinetic TBE 300 and VTX 160 Creative SB X4 Asus ROG XG349C
|
Sajin
EVGA Forum Moderator
- Total Posts : 49131
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: PX1 0.4.9.0 is out
2019/09/05 14:45:18
(permalink)
Improvements to "Boost Lock" feature to ensure max overclock. Gonna have to try that out in a bit.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49131
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: PX1 0.4.9.0 is out
2019/09/05 16:21:28
(permalink)
Well the improvements to the "boost lock" feature didn't do anything to help improve my max overclock as the voltage is still limited. Only noticeable changes I could see were it locked the memory clock to the max value (0.4.8.0 didn't do this), and it set the voltage slider all the way to 100% (0.4.8.0 didn't do this) which didn't allow the card to pull more voltage anyways, so setting it to 100% didn't help at all.
|
kacan22
iCX Member
- Total Posts : 304
- Reward points : 0
- Joined: 2017/07/13 20:36:08
- Location: Europe
- Status: offline
- Ribbons : 2
Re: PX1 0.4.9.0 is out
2019/09/05 16:28:49
(permalink)
Sajin Well the improvements to the "boost lock" feature didn't do anything to help improve my max overclock as the voltage is still limited. Only noticeable changes I could see were it locked the memory clock to the max value (0.4.8.0 didn't do this), and it set the voltage slider all the way to 100% (0.4.8.0 didn't do this) which didn't allow the card to pull more voltage anyways, so setting it to 100% didn't help at all.
Did you try boost lock on SLI?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49131
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: PX1 0.4.9.0 is out
2019/09/05 16:29:02
(permalink)
|
kacan22
iCX Member
- Total Posts : 304
- Reward points : 0
- Joined: 2017/07/13 20:36:08
- Location: Europe
- Status: offline
- Ribbons : 2
Re: PX1 0.4.9.0 is out
2019/09/05 16:29:51
(permalink)
Sajin Yes.
Any improvements or i should stick with 0.4.8? My friend installed 0.4.9 but he doesnt notice any improvements on sli :S. Im not sure if i want to upgrade to 0.4.9 because im scared to get any new "problems" with software :(
|
Sajin
EVGA Forum Moderator
- Total Posts : 49131
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: PX1 0.4.9.0 is out
2019/09/05 16:30:59
(permalink)
kacan22
Sajin Yes.
Any improvements or i should stick with 0.4.8?
Works just the same as it did in 0.4.8 for me. The boost lock feature worked in sli for me with 0.4.8.
|
kacan22
iCX Member
- Total Posts : 304
- Reward points : 0
- Joined: 2017/07/13 20:36:08
- Location: Europe
- Status: offline
- Ribbons : 2
Re: PX1 0.4.9.0 is out
2019/09/05 16:32:23
(permalink)
Sajin
kacan22
Sajin Yes.
Any improvements or i should stick with 0.4.8?
Works just the same as it did in 0.4.8 for me. The boost lock feature worked in sli for me with 0.4.8.
Oh ok thanks for info. Cheers!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49131
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: PX1 0.4.9.0 is out
2019/09/05 16:32:39
(permalink)
|
Hopper64
SSC Member
- Total Posts : 735
- Reward points : 0
- Joined: 2012/01/02 09:16:21
- Status: offline
- Ribbons : 0
Re: PX1 0.4.9.0 is out
2019/09/05 17:33:44
(permalink)
Looks like there's a new FW FA.42? 8/28. Anyone see that?
Asus Maximus Z690E i9 12900KS GSkill F5-6000U3636E16GX2-TZ5RK Samsung 980 Pro Corsair AX1600i Asus Strix 3090 OC EKWB Quantum Kinetic TBE 300 and VTX 160 Creative SB X4 Asus ROG XG349C
|
Hoggle
EVGA Forum Moderator
- Total Posts : 10084
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: PX1 0.4.9.0 is out
2019/09/05 17:38:26
(permalink)
Only a small improvement list but still figure it's worth the update.
|
Hopper64
SSC Member
- Total Posts : 735
- Reward points : 0
- Joined: 2012/01/02 09:16:21
- Status: offline
- Ribbons : 0
Re: PX1 0.4.9.0 is out
2019/09/05 18:29:45
(permalink)
Asus Maximus Z690E i9 12900KS GSkill F5-6000U3636E16GX2-TZ5RK Samsung 980 Pro Corsair AX1600i Asus Strix 3090 OC EKWB Quantum Kinetic TBE 300 and VTX 160 Creative SB X4 Asus ROG XG349C
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: PX1 0.4.9.0 is out
2019/09/05 20:48:49
(permalink)
Hoggle Only a small improvement list but still figure it's worth the update.
+1
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
dc8flyer
SSC Member
- Total Posts : 558
- Reward points : 0
- Joined: 2016/02/23 00:10:47
- Status: offline
- Ribbons : 7
Re: PX1 0.4.9.0 is out
2019/09/06 02:58:22
(permalink)
Downloading 4.9 Seems you cant skip 4.8 and go straight to 4.9 or you will get multiple errors during the download. Hitting ignore or retry will not help. You will have to download 4.8 before downloading 4.9. And as usual the fan curve and a few other settings will have to be reset.
2009 Alienware Aurora x58 i7 990x oc to 4.14 Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors RTX 2080ti EVGA Black XC oc 1250/160 with 456.55 CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory 2TB 860evo SSD Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow Windows 10 - always the latest
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: PX1 0.4.9.0 is out
2019/09/06 04:29:04
(permalink)
Updating from 4.4 to 4.9, everything works like normal. Except Boost lock. Tried to lock at 2100 just to test the feature, and when I clicked apply it just locked up my PC entirely. 2100 is where my card usually runs after heating up and throttling and can run like that for hours in game at 95%+ load, and pass any benchmark with no issue. But trying to lock it on desktop and i have to hard reset Also worth noting as with previous installs I used bcavanaughs PX1 clean up method before updating.
post edited by xblackvalorx - 2019/09/06 04:59:19
|
dc8flyer
SSC Member
- Total Posts : 558
- Reward points : 0
- Joined: 2016/02/23 00:10:47
- Status: offline
- Ribbons : 7
Re: PX1 0.4.9.0 is out
2019/09/06 06:31:46
(permalink)
xblackvalorx Updating from 4.4 to 4.9, everything works like normal. Except Boost lock. Tried to lock at 2100 just to test the feature, and when I clicked apply it just locked up my PC entirely. 2100 is where my card usually runs after heating up and throttling and can run like that for hours in game at 95%+ load, and pass any benchmark with no issue. But trying to lock it on desktop and i have to hard reset
Also worth noting as with previous installs I used bcavanaughs PX1 clean up method before updating.
When 4.9 failed it installed 4.4. I installed 4.8 next and then had no trouble installing 4.9 after that. Did not have to uninstall anything PX1 prior to downloading 4.9.
2009 Alienware Aurora x58 i7 990x oc to 4.14 Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors RTX 2080ti EVGA Black XC oc 1250/160 with 456.55 CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory 2TB 860evo SSD Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow Windows 10 - always the latest
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30908
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: PX1 0.4.9.0 is out
2019/09/06 07:13:08
(permalink)
@ dc8flyer Seeing any improvements, performance wise or stability ?
|
dc8flyer
SSC Member
- Total Posts : 558
- Reward points : 0
- Joined: 2016/02/23 00:10:47
- Status: offline
- Ribbons : 7
Re: PX1 0.4.9.0 is out
2019/09/06 07:33:11
(permalink)
Cool GTX @ dc8flyer Seeing any improvements, performance wise or stability ?
None. I forget which version it was but since then I have had to decrease the memory from 1300 to 1200 and now 1100 MHZ and the GPU clock from 180 down to 160 to find stability. BFV is now also acting up but I believe that has to do more with the latest BFV update. Another issue has been with PX1 and BFV not working together concerning Gsync. Some PX1 updates in the past and now with 4.9 have caused Gysnc to turn on automatically even though I have it deselected in the Control Panel. While BFV is loading Gsync turns on, thinks about it for 30 seconds or so and then turns itself off. But after five to ten minutes one of the two programs re-engages Gsync and BFV crashes. The Gsync issue started right after nVidia made Gysnc available to the masses. So the CP might be part of the issue as well but there have been some updates to PX1 where the Gsync issue was not a problem.
2009 Alienware Aurora x58 i7 990x oc to 4.14 Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors RTX 2080ti EVGA Black XC oc 1250/160 with 456.55 CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory 2TB 860evo SSD Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow Windows 10 - always the latest
|
Desaccorde
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2014/11/29 10:42:43
- Status: offline
- Ribbons : 1
Re: PX1 0.4.9.0 is out
2019/09/06 12:47:23
(permalink)
This version is not able read my profiles I created on v0.4.8.0, so I had to roll back. Also, when I installed the latest Windows update, which is called "2019-08 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4512941)" none of the versions of the software didn't boot on windows startup. So I uninstalled the update and installed v0.4.8.0 again, and everything seems working. My system properties are: i5-9600K, 16GB RAM, EVGA 2080ti Black Edition, Windows 10 Pro 64-Bit.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: PX1 0.4.9.0 is out
2019/09/06 14:37:26
(permalink)
xblackvalorx Updating from 4.4 to 4.9, everything works like normal. Except Boost lock. Tried to lock at 2100 just to test the feature, and when I clicked apply it just locked up my PC entirely. 2100 is where my card usually runs after heating up and throttling and can run like that for hours in game at 95%+ load, and pass any benchmark with no issue. But trying to lock it on desktop and i have to hard reset
Also worth noting as with previous installs I used bcavanaughs PX1 clean up method before updating.
Yeah my boost clock typically settles in at 2100 with my overclock, not sure boost lock would be good for me. May give it a try a little later on just to see.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: PX1 0.4.9.0 is out
2019/09/06 16:12:02
(permalink)
dc8flyer
xblackvalorx Updating from 4.4 to 4.9, everything works like normal. Except Boost lock. Tried to lock at 2100 just to test the feature, and when I clicked apply it just locked up my PC entirely. 2100 is where my card usually runs after heating up and throttling and can run like that for hours in game at 95%+ load, and pass any benchmark with no issue. But trying to lock it on desktop and i have to hard reset
Also worth noting as with previous installs I used bcavanaughs PX1 clean up method before updating.
When 4.9 failed it installed 4.4. I installed 4.8 next and then had no trouble installing 4.9 after that. Did not have to uninstall anything PX1 prior to downloading 4.9.
Didn't have any issues installing, just the lock up with the boost lock feature
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: PX1 0.4.9.0 is out
2019/09/06 16:14:17
(permalink)
d.burnette
xblackvalorx Updating from 4.4 to 4.9, everything works like normal. Except Boost lock. Tried to lock at 2100 just to test the feature, and when I clicked apply it just locked up my PC entirely. 2100 is where my card usually runs after heating up and throttling and can run like that for hours in game at 95%+ load, and pass any benchmark with no issue. But trying to lock it on desktop and i have to hard reset
Also worth noting as with previous installs I used bcavanaughs PX1 clean up method before updating.
Yeah my boost clock typically settles in at 2100 with my overclock, not sure boost lock would be good for me. May give it a try a little later on just to see.
I just wanted to test the feature out, cuz honestly if I could lock it at 2165 regardless of temp when gaming that'd be pretty cool. Help finish smoothing out the last few frame dips in stuff like AC Odyssey and ghost recon wildlands
|
KingStyle
New Member
- Total Posts : 80
- Reward points : 0
- Joined: 2008/02/27 20:41:38
- Status: offline
- Ribbons : 0
Re: PX1 0.4.9.0 is out
2019/09/07 08:57:08
(permalink)
My boost lock still only goes to 1674, when it would normally go to 2050.
AMD Ryzen 9 5900X Gigabyte X570 Aorus Master evga 3080 ti Hydro Copper G.Skill Trident Z Neo 32 GB DDR4-3600 WD Black SN850 1 TB NVMe Samsung 970 Evo Plus 250 GB NVMe Samsung 970 Evo Plus 1 TB NVMe Samsung 860 Evo 1 TB SSD Samsung 840 Pro 256 GB SSD Seasonic PRIME Ultra Platinum 1000 W 80+ Lian Li 011 Dynamic XL Monitors (3) Dell S2721DGF CPU Block Optimus Foundation GPU Block EKWB Watercooling EKWB PETG Hardline tubing and fittings
|
ultimatepro
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2015/07/06 19:47:41
- Status: offline
- Ribbons : 0
Re: PX1 0.4.9.0 is out
2019/09/09 16:45:55
(permalink)
Please add support for the temp indicator LEDs on GTX 1080ti FTW3
|
flyinion
CLASSIFIED Member
- Total Posts : 2275
- Reward points : 0
- Joined: 2007/03/27 12:17:04
- Location: California
- Status: offline
- Ribbons : 8
Re: PX1 0.4.9.0 is out
2019/09/09 17:04:46
(permalink)
So I was running 4.8 and when I told it to check for update it didn't find one. Had to just go to the website and download/install. Is this a known issue with this software? I was using the older XOC product until a few weeks ago.
AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
|
DaveLessnau
New Member
- Total Posts : 98
- Reward points : 0
- Joined: 2012/11/05 20:22:08
- Status: offline
- Ribbons : 3
Re: PX1 0.4.9.0 is out
2019/09/17 06:16:16
(permalink)
PX1 0.4.9.0 didn't start up with Windows this morning. Checked with Reliability Monitor and saw that it "stopped working." I don't know if this is the place for it, but here's the details: "Source Precision X1
Summary Stopped working
Date 9/17/2019 6:07 AM
Status Report sent
Description Faulting Application Path: C:\Program Files\EVGA\Precision X1\PrecisionX_x64.exe
Problem signature Problem Event Name: CLR20r3 Problem Signature 01: PrecisionX_x64.exe Problem Signature 02: 0.4.9.0 Problem Signature 03: 5d68e950 Problem Signature 04: mscorlib Problem Signature 05: 4.8.4010.0 Problem Signature 06: 5d3a23c0 Problem Signature 07: 168e Problem Signature 08: fd Problem Signature 09: System.Windows.Markup.XamlParse OS Version: 10.0.18362.2.0.0.256.48 Locale ID: 1033 Additional Information 1: 14d3 Additional Information 2: 14d33c21c24aac20b126b0e5ae485d94 Additional Information 3: e3fb Additional Information 4: e3fb00402f332f8bd37c64197b22a250
Extra information about the problem Bucket ID: 0f9536ddcb2816f6e4fd8cf5d1615e83 (1512520037274050179)"
|
DaveLessnau
New Member
- Total Posts : 98
- Reward points : 0
- Joined: 2012/11/05 20:22:08
- Status: offline
- Ribbons : 3
Re: PX1 0.4.9.0 is out
2019/09/17 06:36:13
(permalink)
And, here's more information from Event Viewer: "Log Name: Application Source: .NET Runtime Date: 9/17/2019 6:06:59 AM Event ID: 1026 Task Category: None Level: Error Keywords: Classic User: N/A Computer: WIN10-DAVE Description: Application: PrecisionX_x64.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.IO.DirectoryNotFoundException at System.IO.__Error.WinIOError(Int32, System.String) at System.IO.Directory.InternalCreateDirectory(System.String, System.String, System.Object, Boolean) at System.IO.Directory.InternalCreateDirectoryHelper(System.String, Boolean) at PX18.ViewModel.GeneralVM.initialScreenCapture()
Exception Info: System.Windows.Markup.XamlParseException at System.Windows.Markup.XamlReader.RewrapException(System.Exception, System.Xaml.IXamlLineInfo, System.Uri) at System.Windows.Markup.WpfXamlLoader.Load(System.Xaml.XamlReader, System.Xaml.IXamlObjectWriterFactory, Boolean, System.Object, System.Xaml.XamlObjectWriterSettings, System.Uri) at System.Windows.Markup.WpfXamlLoader.LoadBaml(System.Xaml.XamlReader, Boolean, System.Object, System.Xaml.Permissions.XamlAccessLevel, System.Uri) at System.Windows.Markup.XamlReader.LoadBaml(System.IO.Stream, System.Windows.Markup.ParserContext, System.Object, Boolean) at PX18.View.MainWindow..ctor() at PX18.App.App_Startup(System.Object, System.Windows.StartupEventArgs) at System.Windows.Application.OnStartup(System.Windows.StartupEventArgs) at System.Windows.Application.<.ctor>b__1_0(System.Object) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object) at MS.Internal.CulturePreservingExecutionContext.Run(MS.Internal.CulturePreservingExecutionContext, System.Threading.ContextCallback, System.Object) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr) at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef) at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) at System.Windows.Application.RunDispatcher(System.Object) at System.Windows.Application.RunInternal(System.Windows.Window) at PX18.App.Main() at PX18.Program.Main()
Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name=".NET Runtime" /> <EventID Qualifiers="0">1026</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2019-09-17T13:06:59.784305800Z" /> <EventRecordID>4972</EventRecordID> <Channel>Application</Channel> <Computer>WIN10-DAVE</Computer> <Security /> </System> <EventData> <Data>Application: PrecisionX_x64.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.IO.DirectoryNotFoundException at System.IO.__Error.WinIOError(Int32, System.String) at System.IO.Directory.InternalCreateDirectory(System.String, System.String, System.Object, Boolean) at System.IO.Directory.InternalCreateDirectoryHelper(System.String, Boolean) at PX18.ViewModel.GeneralVM.initialScreenCapture()
Exception Info: System.Windows.Markup.XamlParseException at System.Windows.Markup.XamlReader.RewrapException(System.Exception, System.Xaml.IXamlLineInfo, System.Uri) at System.Windows.Markup.WpfXamlLoader.Load(System.Xaml.XamlReader, System.Xaml.IXamlObjectWriterFactory, Boolean, System.Object, System.Xaml.XamlObjectWriterSettings, System.Uri) at System.Windows.Markup.WpfXamlLoader.LoadBaml(System.Xaml.XamlReader, Boolean, System.Object, System.Xaml.Permissions.XamlAccessLevel, System.Uri) at System.Windows.Markup.XamlReader.LoadBaml(System.IO.Stream, System.Windows.Markup.ParserContext, System.Object, Boolean) at PX18.View.MainWindow..ctor() at PX18.App.App_Startup(System.Object, System.Windows.StartupEventArgs) at System.Windows.Application.OnStartup(System.Windows.StartupEventArgs) at System.Windows.Application.<.ctor>b__1_0(System.Object) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object) at MS.Internal.CulturePreservingExecutionContext.Run(MS.Internal.CulturePreservingExecutionContext, System.Threading.ContextCallback, System.Object) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr) at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef) at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) at System.Windows.Application.RunDispatcher(System.Object) at System.Windows.Application.RunInternal(System.Windows.Window) at PX18.App.Main() at PX18.Program.Main()
</Data> </EventData> </Event>"
|
Koithim
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2017/03/14 18:24:49
- Location: Canada
- Status: offline
- Ribbons : 3
Re: PX1 0.4.9.0 is out
2019/09/18 17:04:56
(permalink)
Cannot display anything with 0.4.9.0 on the new Z10 RGB lcd display. Anyone having same issue? Edit: Got it working, nevermind that post. Cheers! K
post edited by Koithim - 2019/09/18 17:42:54
CASE: EVGA DG-87 | COOL: ASUS Ryujin 360PSU: EVGA SuperNOVA 1000 T2 | MOBO: ROG Maximus XI ExtremeCPU: i9-9900k @ 5.0 GHz | 4x8GB G.skill Trident Royal ddr4-4000SSD: Samsung 960 Pro 512GB PCIe M.2EVGA GeForce RTX 3090 FTW3 ULTRADisplay: Asus PG279Q | Windows 10 pro 21H2
|