EVGA

Hot!*OFFICIAL* EVGA RTX 3090 Kingpin

Page: << < ..1112131415.. > >> Showing page 11 of 23
Author
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 9594
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 46
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/07 19:51:56 (permalink)
_Gir_
 




Oh very nice!  Had no idea they were doing both.  Last gen they sold the waterblock separate. 
 
Thanks for the heads up!

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
Nikos4Life
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2014/11/30 00:51:12
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/11 01:22:05 (permalink)
Hey guys just a quick question,


I am starting my build with the 3090 KP Hybrid. The installation guide provides a diagram showing that it should be mounted with the radiator over the gpu card. So to speak, the radiator should be on top of chassis.
As I need the upper side of the chassis to put the CPU radiator (custom WC), I am wondering if despite the installation guide it is OK to put the KP radiator under the GPU. I tried to find information about this but could not find anything related.
Thanks in advance.

Best,
Nikos / Miguel
menko2
New Member
  • Total Posts : 97
  • Reward points : 0
  • Joined: 2020/10/11 15:04:34
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/11 01:40:55 (permalink)
Nikos4Life
Hey guys just a quick question,


I am starting my build with the 3090 KP Hybrid. The installation guide provides a diagram showing that it should be mounted with the radiator over the gpu card. So to speak, the radiator should be on top of chassis.
As I need the upper side of the chassis to put the CPU radiator (custom WC), I am wondering if despite the installation guide it is OK to put the KP radiator under the GPU. I tried to find information about this but could not find anything related.
Thanks in advance.

Best,
Nikos / Miguel


Miguel you can put the gpu radiator in front of the case as well. Top of the case is the best but I have the cpu radiator there.

As long the tubes of the kingping are down and the top of the radiator is above the gpu.

This is the way I have it. There is a long video in youtube where all this is explained. It's ok front mount.
Nikos4Life
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2014/11/30 00:51:12
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/11 01:48:49 (permalink)
menko2
Nikos4Life
Hey guys just a quick question,


I am starting my build with the 3090 KP Hybrid. The installation guide provides a diagram showing that it should be mounted with the radiator over the gpu card. So to speak, the radiator should be on top of chassis.
As I need the upper side of the chassis to put the CPU radiator (custom WC), I am wondering if despite the installation guide it is OK to put the KP radiator under the GPU. I tried to find information about this but could not find anything related.
Thanks in advance.

Best,
Nikos / Miguel


Miguel you can put the gpu radiator in front of the case as well. Top of the case is the best but I have the cpu radiator there.

As long the tubes of the kingping are down and the top of the radiator is above the gpu.

This is the way I have it. There is a long video in youtube where all this is explained. It's ok front mount.



Thanks menko2, 


the problem is that my new chassis only allows a radiator on top or bottom. Front side is a glass panel so there is no way to hold the radiator there.
I think I have seen the video you are talking about from GamerNexus. That is why I came here to know if even if the best solution is to place it on top, putting it down the bottom will do for a while at least until a custom waterblock / HC version is released.

Best,
Nikos / Miguel
menko2
New Member
  • Total Posts : 97
  • Reward points : 0
  • Joined: 2020/10/11 15:04:34
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/11 01:53:23 (permalink)
Nikos4Life
menko2
Nikos4Life
Hey guys just a quick question,


I am starting my build with the 3090 KP Hybrid. The installation guide provides a diagram showing that it should be mounted with the radiator over the gpu card. So to speak, the radiator should be on top of chassis.
As I need the upper side of the chassis to put the CPU radiator (custom WC), I am wondering if despite the installation guide it is OK to put the KP radiator under the GPU. I tried to find information about this but could not find anything related.
Thanks in advance.

Best,
Nikos / Miguel


Miguel you can put the gpu radiator in front of the case as well. Top of the case is the best but I have the cpu radiator there.

As long the tubes of the kingping are down and the top of the radiator is above the gpu.

This is the way I have it. There is a long video in youtube where all this is explained. It's ok front mount.



Thanks menko2, 


the problem is that my new chassis only allows a radiator on top or bottom. Front side is a glass panel so there is no way to hold the radiator there.
I think I have seen the video you are talking about from GamerNexus. That is why I came here to know if even if the best solution is to place it on top, putting it down the bottom will do for a while at least until a custom waterblock / HC version is released.

Best,
Nikos / Miguel


Yes that's the video from gamernexus.

It's so strange that we get the card in Spain from a retailer before many people in u.s.
Normally we are the last.

Once you install evga precision overclock utility will update the firmware of the card. it looks it breaks some users led screen in the card but I installed anyways.
Nikos4Life
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2014/11/30 00:51:12
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/11 01:59:22 (permalink)
menko2
Nikos4Life
menko2
Nikos4Life
Hey guys just a quick question,


I am starting my build with the 3090 KP Hybrid. The installation guide provides a diagram showing that it should be mounted with the radiator over the gpu card. So to speak, the radiator should be on top of chassis.
As I need the upper side of the chassis to put the CPU radiator (custom WC), I am wondering if despite the installation guide it is OK to put the KP radiator under the GPU. I tried to find information about this but could not find anything related.
Thanks in advance.

Best,
Nikos / Miguel


Miguel you can put the gpu radiator in front of the case as well. Top of the case is the best but I have the cpu radiator there.

As long the tubes of the kingping are down and the top of the radiator is above the gpu.

This is the way I have it. There is a long video in youtube where all this is explained. It's ok front mount.



Thanks menko2, 


the problem is that my new chassis only allows a radiator on top or bottom. Front side is a glass panel so there is no way to hold the radiator there.
I think I have seen the video you are talking about from GamerNexus. That is why I came here to know if even if the best solution is to place it on top, putting it down the bottom will do for a while at least until a custom waterblock / HC version is released.

Best,
Nikos / Miguel


Yes that's the video from gamernexus.

It's so strange that we get the card in Spain from a retailer before many people in u.s.
Normally we are the last.

Once you install evga precision overclock utility will update the firmware of the card. it looks it breaks some users led screen in the card but I installed anyways.


It's going to take me a while until I turn on the PC with everything setup so I hope by the time I am ready to do so a newer version of it fix that issue xD. 
About Spain getting the card sooner than the US market I do not get it too... 





GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 9594
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 46
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/12 08:42:56 (permalink)
menko2
Nikos4Life
Hey guys just a quick question,


I am starting my build with the 3090 KP Hybrid. The installation guide provides a diagram showing that it should be mounted with the radiator over the gpu card. So to speak, the radiator should be on top of chassis.
As I need the upper side of the chassis to put the CPU radiator (custom WC), I am wondering if despite the installation guide it is OK to put the KP radiator under the GPU. I tried to find information about this but could not find anything related.
Thanks in advance.

Best,
Nikos / Miguel


Miguel you can put the gpu radiator in front of the case as well. Top of the case is the best but I have the cpu radiator there.

As long the tubes of the kingping are down and the top of the radiator is above the gpu.

This is the way I have it. There is a long video in youtube where all this is explained. It's ok front mount.



That's correct.  You want an AIO installed at least have the air trapped above the GPU even if the radiator is leveled with the GPU with the tubing at coming and going at the bottom half of the rad.
 
If it's a custom liquid cooled PC, having a rad at the bottom or anywhere really won't matter as much as you'll have a reservoir somewhere in your loop trapping all the air.

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
stryker7314
New Member
  • Total Posts : 92
  • Reward points : 0
  • Joined: 2012/04/12 16:15:25
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/12 09:30:37 (permalink)
What size are the tubes and fittings on the aio, planning to modify it for moar cooling.
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 9594
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 46
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/13 09:35:57 (permalink)
stryker7314
What size are the tubes and fittings on the aio, planning to modify it for moar cooling.




IIRC, they stated that the length of the tubing would be 400mm.
 
Now I'm not sure if modifying a AIO would be a good idea but that is up to you and know that you will void the warranty if any modifications are done from it's original state out of the box.

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
GbrilliantQ
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2016/03/29 16:06:08
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/17 09:06:35 (permalink)
Anyone else experiences hotter GPU temps after turning off auto fan speeds?  I'll see a 6-degree c difference by going from auto to 100% in precision.


PA22PORT
New Member
  • Total Posts : 31
  • Reward points : 0
  • Joined: 2010/04/08 11:40:43
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/17 09:15:03 (permalink)
Considering selling my 3090 kpe, because the lack of waterblock availability from evga, byskiky and optimus. my custom watercool build is on hold due to that. By the time a block is release, its going to be time for new card. Any thoughts?
Sajin
EVGA Forum Moderator
  • Total Posts : 45776
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 198
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/17 09:19:54 (permalink)
GbrilliantQ
Anyone else experiences hotter GPU temps after turning off auto fan speeds?  I'll see a 6-degree c difference by going from auto to 100% in precision.

No.

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 9594
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 46
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/17 14:19:07 (permalink)
PA22PORT
Considering selling my 3090 kpe, because the lack of waterblock availability from evga, byskiky and optimus. my custom watercool build is on hold due to that. By the time a block is release, its going to be time for new card. Any thoughts?



All signs are pointing towards a eventual Kingpin Waterblock release soon.
 
GTXJackBauer
Fresh off the press!
 

***Official EVGA GeForce RTXᐪᔿ 3090 K|NGP|N HYDRO COPPER***

 



 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
moonlight123
New Member
  • Total Posts : 100
  • Reward points : 0
  • Joined: 2021/01/17 01:43:44
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/18 03:36:50 (permalink)
awesome card
MKAALAWAJI
Superclocked Member
  • Total Posts : 111
  • Reward points : 0
  • Joined: 2020/12/22 03:16:29
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/19 03:52:54 (permalink)
man kingpin looks like a Monster 
Nikos4Life
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2014/11/30 00:51:12
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/19 06:45:41 (permalink)
Does anyone know where to find 3090 K|NGP|N manual online? I am not able to find it anywhere :| 
Sajin
EVGA Forum Moderator
  • Total Posts : 45776
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 198
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/19 06:53:33 (permalink)
Nikos4Life
Does anyone know where to find 3090 K|NGP|N manual online? I am not able to find it anywhere :| 

Gonna need to call evga support.

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
Nikos4Life
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2014/11/30 00:51:12
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 02:27:00 (permalink)
Sajin
Nikos4Life
Does anyone know where to find 3090 K|NGP|N manual online? I am not able to find it anywhere :| 

Gonna need to call evga support.

Thanks!!


----

Changing subject: 

I am new to overclocking with a KP card, currently using LN2 BIOS to run some test. Would anyone mind to give me some advice to get the most of this card?

Have to ask Vince for XOC BIOS (a.k.a BIOS 1000W) through email, right?

AFAIK there is a tool called Classified Tools, which allows user to control voltages and other parameters, where could I find latest version of this tool?

After that, Should I use Precision X1 to control clocks?

I came from overclocking a Titan Xp for a while, and I used MSI AfterBurner to change frequency curve, so would like to learn how to do this in PX1.
At the moment, I ran 3DMark Fire Strike and could not get pass 470W (520W BIOS), MEM = ~11000MHZ, Core= 2150-2160

Is this what should I expect?

I will buy Port Royal today so I will provide more info.

Best,
Nikos / Miguel
menko2
New Member
  • Total Posts : 97
  • Reward points : 0
  • Joined: 2020/10/11 15:04:34
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 04:12:59 (permalink)
One quick question.

Will my 3090 kingpin will get better fps at 4k with a intel 10900k or ryzen 5900x?

Both with optimal ram, motherboard, ssd,...
pclausen
Superclocked Member
  • Total Posts : 192
  • Reward points : 0
  • Joined: 2017/07/22 20:02:38
  • Status: offline
  • Ribbons : 1
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 04:24:56 (permalink)
I'll be receiving my KP tomorrow and was wondering if there are any recommendations for stick-on heatsinks for the RAM on the back plate?
 
Something like this perhaps?
 

 
I had a 3090 XC3 Ultra Hybrid, and I had to run a desk fan across the backplate to keep the memory cool when mining ETH.
 
When not gaming, I plan to have my KP mine ETH as well, but don't want the rear memory to be running at 100C plus for hours at a time.
post edited by pclausen - 2021/01/20 05:44:15
Nereus
Captain Goodvibes
  • Total Posts : 16755
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 52
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 08:32:22 (permalink)
pclausen
I'll be receiving my KP tomorrow and was wondering if there are any recommendations for stick-on heatsinks for the RAM on the back plate?
*snip*

I have not assembled my loop or block yet, but have purchased the following for the same reason you mention:
50x50x20mm aluminum heatsinks link
Self adhesive thermal tape link
Crafting wire link 
- the crafting wire is to fashion some sort of clip to secure the heat sink(s) to the back plate - I will have my GPU mounted vertically, so I don't think thermal tape alone will hold them in place.
 

ASSOCIATE CODE CSKKXUT5Q9GVAFR FOR UP TO 10% DISCOUNT ON EVGA.COM PURCHASES! [DETAILS]

  BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

pclausen
Superclocked Member
  • Total Posts : 192
  • Reward points : 0
  • Joined: 2017/07/22 20:02:38
  • Status: offline
  • Ribbons : 1
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 12:06:24 (permalink)
Thanks for the feedback.  Yeah, those heatsinks look like they would be a lot more effective.  Went ahead and placed order for all 3 items.
 
I too am waiting on a block (or hopefully 2, front and back) for my KP.  Rest of my system (5950X and VRMs) are already on water.
wolffbeau
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2020/09/24 12:36:02
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 13:03:30 (permalink)
pclausen
I'll be receiving my KP tomorrow and was wondering if there are any recommendations for stick-on heatsinks for the RAM on the back plate?
 
Something like this perhaps?
 

 
I had a 3090 XC3 Ultra Hybrid, and I had to run a desk fan across the backplate to keep the memory cool when mining ETH.
 
When not gaming, I plan to have my KP mine ETH as well, but don't want the rear memory to be running at 100C plus for hours at a time.




Are these good to have on just in general?
4RXN
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2021/01/19 15:22:16
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 20:23:27 (permalink)
Has there been any announcement of when the 3090 Kingpin will be available for purchase to the general public, i.e. non-elite members?
rygaul44
New Member
  • Total Posts : 78
  • Reward points : 0
  • Joined: 2015/02/18 17:27:47
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 20:38:01 (permalink)
_ARXN_
Has there been any announcement of when the 3090 Kingpin will be available for purchase to the general public, i.e. non-elite members?
no there hasn't but my best guess would be sometime after the current queue gets caught up if at all
Jchilleron
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2021/01/20 04:17:21
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/20 21:39:54 (permalink)
_ARXN_
Has there been any announcement of when the 3090 Kingpin will be available for purchase to the general public, i.e. non-elite members?


I did buy in Spain. Retailer store. They had some units in stock.

I'm not elite member.
sunlight0
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2021/01/18 22:07:14
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/22 04:51:48 (permalink)
I hope I can get the card soon. Waiting is too tired.
whyamihereagain
New Member
  • Total Posts : 31
  • Reward points : 0
  • Joined: 2020/12/17 13:42:37
  • Status: offline
  • Ribbons : 0
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/22 13:14:57 (permalink)
Any idea on the next batch of cards?
Sajin
EVGA Forum Moderator
  • Total Posts : 45776
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 198
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/22 21:45:58 (permalink)
Nikos4Life
Sajin
Nikos4Life
Does anyone know where to find 3090 K|NGP|N manual online? I am not able to find it anywhere :| 

Gonna need to call evga support.

Thanks!!


----

Changing subject: 

I am new to overclocking with a KP card, currently using LN2 BIOS to run some test. Would anyone mind to give me some advice to get the most of this card?

Have to ask Vince for XOC BIOS (a.k.a BIOS 1000W) through email, right?

AFAIK there is a tool called Classified Tools, which allows user to control voltages and other parameters, where could I find latest version of this tool?

After that, Should I use Precision X1 to control clocks?

I came from overclocking a Titan Xp for a while, and I used MSI AfterBurner to change frequency curve, so would like to learn how to do this in PX1.
At the moment, I ran 3DMark Fire Strike and could not get pass 470W (520W BIOS), MEM = ~11000MHZ, Core= 2150-2160

Is this what should I expect?

I will buy Port Royal today so I will provide more info.

Best,
Nikos / Miguel

You can get the 1000w xoc vbios from techpowerup.com. The classified tool can be downloaded from the overclocking section of these forums. Specifically here... https://forums.evga.com/3...OC-Tools-m3154924.aspx

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
enewt
Omnipotent Enthusiast
  • Total Posts : 10088
  • Reward points : 0
  • Joined: 2020/09/21 18:01:11
  • Status: offline
  • Ribbons : 2
Re: Sightings of the EVGA RTX 3090 Kingpin 2021/01/22 21:48:13 (permalink)
whyamihereagain
Any idea on the next batch of cards?



We got through about 62 spots this week on the self-reported KPE queue.  In other news, Jacob has now suggested that the KPE HC will have a March birthday...****.
 
 

Attached Image(s)


Please use my Associate Code at your checkouts for up to 10% discounts on all your EVGA purchases: VDN2319M4O569J4

K|NGP|N Hybrid Queue 
K|NGP|N Hydro Copper Queue 
EVGA Queue Summary (North America) 
EVGA Rewards Code: 42LA25Q1N7

Page: << < ..1112131415.. > >> Showing page 11 of 23
Jump to:
  • Back to Mobile