I'm building a new PC (used old GPU/SSD) but I can't get a video feed.
 
Mobo: EVGA Z390 FTW
EVGA 240(?) CLC
PSU: 750 EVGA G3
CPU: 8086k
GPU: amd radeon fury x
Ram: 1x stick of HyperX Predator Black 8GB 3200MHz DDR4
SSD: Samsung 850 evo  (windows 10 installed)
 
Fans and lights work but Motherboard shows D4 (or is it 04) + no video + doesn't beep.
*the USB's (keyboard/mouse) don't light up
 
Nothing shows up on the monitor unless I swapping the GPU with an old GTX 760 where it says something about legacy drivers(?) and every time I tell it use the default/optimized settings it just loops back to the bios start screen. Never got it to load the OS.
 
*It says CPU/ram has changed but I believe that’s normal on first boot?
*IIRC the GTX 760 says D4/04 aswell
*If remove the hard-drive connected it changes error to 97
*USB's (keyboard/mouse) light up when the GTX 760 is in
 
I've tried:
Re-seating everything
Moving ram around to different slots
Checking all cables
Tested GPU/SSD is another PC
 
 
Is it possible the SSD is just to old (or windows 10 doesn't like being moved to a new mobo's?) and isn't supported?
 
Only thing left for me to try is create a USB boot drive (and/or buy a m.2) and see if that works.
 
Any suggestions?

Things to try...
 
#1 Clear the cmos.
#2 Go into the bios and set all your pci-e lanes to GEN3 mode instead of AUTO.
#3 Try the card in a different pci-e slot.
 
Moving an ssd from an old system to a new system with a different chipset is going to make windows 10 not boot. You'll need to reinstall windows to fix the problem of not being able to boot into windows, or you could simply move the ssd back to the old system and sysprep the old windows installation then move the ssd to the new system to keep your old windows installation.

IIRC if you installed windows in legacy mode then tried to boot the drive in UEFI mode it will just throw you back to the bios.

Haven't gotten a new SSD/m.2 yet so I can't be sure but it does support the CPU:


 
The ram in slot one may very well have been the issue but I don't have the willpower ATM to test it out and I'm probably gonna wait till I get a new SSD/m.2 and a new copy of win 10 (ETA 1~2 week).

Ok update time.
 
Got it working with a new m.2 drive -> installed windows -> updated windows -> swapped back the fury X (I used the old GPU to install) and it won't boot.
 
Same error code (04 or D4) no video output no beeps and as far as I can tell it doesn't even get past post?
 
I know the cards good works fine in every other system. Is it possible the mobo isn't compatible with the Fury X?
 

OrgWithAStick
Ok update time.
 
Got it working with a new m.2 drive -> installed windows -> updated windows -> swapped back the fury X (I used the old GPU to install) and it won't boot.
 
Same error code (04 or D4) no video output no beeps and as far as I can tell it doesn't even get past post?
 
I know the cards good works fine in every other system. Is it possible the mobo isn't compatible with the Fury X?
 

And you have updated to the current bios correct?

dallemon
You might need to update the BIOS on your Fury X
techpowerup.com/vgabios/183160/amd-r9furyx-4096-160212
This appears to be the latest and it adds UEFI support :)

Thank you that seems very likely.  I'm gonna have to reassemble the old PC to update/use that tool tho. It might be a few days before I have the free time.
 
/edit or maybe I'll just take it to a computer shop D: that video I just googled up seems complex.

Sajin
Do you have CSM support enabled? If no, turn it on. Your Fury X should boot then.

It was disabled by default. Enabling worked on the first try.