EVGA

New H370 Installation - no video signal

Author
Post
Essentials Only Full Version
crowbank
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2019/02/05 01:44:55
  • Status: offline
  • Ribbons : 0
2019/02/05 01:58:57 (permalink)
I have just finished assembling a new system based on the H370 Stinger, i7 9700K in a mini-ITX case (CiT MTX-007B M), no graphics card.
When I turn it on, the CPU fan is spinning, but there is no video signal (using motherboard HDMI port).
Two potential issues come to mind:
1. The Power Supply comes with a 4-pin rather than 8-pin CPU power. At the moment, I connected the 4-pins (in the only possible way), and ordered an adaptor (to arrive in a couple of days).
2. I understand the Motherboard will require a BIOS upgrade to 1.04 to accommodate the 9700.
 
A. Could I use the system with just the 4-pin power connector?
B. How would I go about upgrading the BIOS when I never have a video signal, and thus cannot use the BIOS menus???
 
Thanks!
#1

3 Replies Related Threads
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49165
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: New H370 Installation - no video signal 2019/02/05 09:37:43 (permalink)
    A. The full 8-pin is required.
    B. Send the board in to evga and have them flash it for you.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #2
    wilfredomorillo
    New Member
    • Total Posts : 1
    • Reward points : 0
    • Joined: 2019/04/12 12:17:38
    • Status: offline
    • Ribbons : 0
    Re: New H370 Installation - no video signal 2019/04/12 12:18:43 (permalink)
    Hey crowbank,
     
    Did you ever figure this out? I have 2 motherboards having the same issue. 
    #3
    _JoseR
    SSC Member
    • Total Posts : 826
    • Reward points : 0
    • Joined: 2014/04/11 09:39:05
    • Status: offline
    • Ribbons : 1
    Re: New H370 Installation - no video signal 2019/04/12 18:21:21 (permalink)
    Crowbank, Welcome to the EVGA Forums!!!
     
    I actually just built a system using the H370 with an 8700 CPU. You will need to plug in a full 8-pin for the CPU and it needs to be directly from the PSU without the use of an adapter.
    #4
    Jump to:
  • Back to Mobile