EVGA

Need to know about BIOS modding

Page: < 123 > Showing page 2 of 3
Author
Post
Essentials Only Full Version
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 14:17:43 (permalink)
Set clk 62,63 and the 2 blank ones to 1312.5-1312.5 Then go all the way up to the top and set the 1st 3 the same way and save.

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#31
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 15:47:59 (permalink)

 
https://drive.google.com/file/d/0B007JgCLgXQLZjJuSzdJSHRHaHc/view?usp=sharing]https://drive.google.com/...RHaHc/view?usp=sharing
 
post edited by DeathAngel74 - 2015/04/06 15:53:51

Attached Image(s)


Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#32
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 15:59:47 (permalink)
make sure you flash your original modded rom, not mine, because i think the sc and ftw came with different bioses. Above I posted my original bios and a modded bios for your max stable settings, for reference purposes. Just copy everything over from mine to yours and flash. The screenshots detail everything.. Have fun.
 
Edit, this is your original bios...It may explain mem oc stability issues.
Filename:EVGA.GTX750Ti.2048.140211.rom
Version:82.07.32.00.50
Build date:2014-02-11 00:00:00
Date added:2014-04-26 11:55
 
http://www.techpowerup.com/vgabios/156974/evga-gtx750ti-2048-140211.html
 
Or use the original bios that you backed up for your card, modify the settings and flash. The screenshot threw me off. I apologize in advance if I am mistaken. I just want you to enjoy card and be issue free, with your newly oc'd card.
 
http://forums.evga.com/download.axd?file=0;2318735&where=&f=test.PNG
 
i dont know if our bioses are interchangable. I don't if its safe to use 82.07.55.00.50 or EVGA finally updated the FTW bios.
post edited by DeathAngel74 - 2015/04/06 16:20:09

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#33
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 17:55:55 (permalink)
Just in case, this a proper modded bios meant for the FTW. EVGAFTW750Ti_1.2v_1425Mhz.rom
https://drive.google.com/...lBbnM/view?usp=sharing

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#34
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 19:08:26 (permalink)
DeathAngel74
Just in case, this a proper modded bios meant for the FTW. EVGAFTW750Ti_1.2v_1425Mhz.rom
https://drive.google.com/...lBbnM/view?usp=sharing




Ok thx.  ill use that then.

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#35
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 19:09:43 (permalink)
actually.  my bios says it's newer.  so should I just use the moded bios I did?

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#36
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 19:19:18 (permalink)
use this one, the one from post # 32
https://drive.google.com/file/d/0B007JgCLgXQLZjJuSzdJSHRHaHc/view?usp=sharing]https://drive.google.com/...RHaHc/view?usp=sharing
 
post edited by DeathAngel74 - 2015/04/06 19:27:16

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#37
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 19:28:30 (permalink)
Ok thx a ton!!
 
However, I've already moded my bios that looks identical to yours.  But I put the base clock at 1450mhz (works too but TDP reaches the mid 90%s).  Which brings me to another question, is it better to 1, keep the clock at 1450mhz, or 2, lower it to 1430 and up the vram clock to 3100?
 
Is it worth it to overclock the vram while sacrificing some of the core clock?  I've already tried doing 1450mhz and 2800mhz (100mhz+) but again the TDP is hindering it.  ( don't want to go higher on the tdp.)
 
If it is worth uping the vram while sacrificing the core clock a little then ill use your bios you made for me.

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#38
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 19:31:45 (permalink)
ok forget what I just said lol.  Your bios is different (and most likely better) so ill flash that really quickly.

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#39
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 19:40:30 (permalink)

:D I'm the mad bios scientist,  ROFL. Testing now....
 

Attached Image(s)


Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#40
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 19:46:11 (permalink)
disable gpu in device manager
when you flash use:
cd c:\nvflash
nvflash -i0 -6 hbzk100.rom
y
y
exit when done
enable gpu, reboot

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#41
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 19:47:28 (permalink)
how in the world do you do that?  I thought all GPU's overclock differently.
 
Boy this would be a great business for peeps like you.  You could sell these kinds of bioses to people who don't want the hassle and are willing to pay $10 for such a bios. ;)
 


Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#42
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 19:49:38 (permalink)
DeathAngel74
disable gpu in device manager
when you flash use:
cd c:\nvflash
nvflash -i0 -6 hbzk100.rom
y
y
exit when done
enable gpu, reboot




Ok ill reflash then.  what does -i0 do?

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#43
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 19:56:17 (permalink)
basically, its
nvlflash -i0(index0=first card)
also if you use afterburner, set the voltage slider and power limit slider to the max. when you drop back down to 2d clocks, it will go back to 135/405 .955mV. If you go over 70C, the card will throttle, so set custom fan curve and make sure its set the fan to 100% @55C. be careful with furmark, its been known to fry cards....just a warning.

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#44
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 19:59:35 (permalink)
ok got it!!
 
BTW... Percision X is saying that my card is a SC not FTW.  why is that?  It's fine with me but I just want to make sure it doesn't damage my card because it says SC lol.
 
Ok ill up the power limit.  Why no power limit changes in the bios?
 
Idk how to thank you more.  I would give you some money but I don't have any money lol.

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#45
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 20:00:59 (permalink)
So? Are you all good now? Just be aware of temps, try to stay below 70C, cuz it will start throttling again, the reason I suggested 100% @ 55C.

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#46
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 20:10:17 (permalink)
I made changes in the power table in the bios, you just need to "enable" them. Are you sure the original bios is 82.07.55.00.50(SC) or 82.07.32.00.50 (FTW) ? If it was in fact a FTW, download and flash this instead, it will still have the same settings.
https://drive.google.com/...lBbnM/view?usp=sharing

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#47
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 20:11:40 (permalink)
Yep i'm good.  Ill do some more testing soon. but besides that yep i'm happy!
 
Thank you so much!! I wouldn't of come this far (and defiantly not this fast) if it weren't for you. :)

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#48
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 20:13:59 (permalink)
DeathAngel74
I made changes in the power table in the bios, you just need to "enable" them. Are you sure the original bios is 82.07.55.00.50(SC) or 82.07.32.00.50 (FTW) ? If it was in fact a FTW, download and flash this instead, it will still have the same settings.
https://drive.google.com/...lBbnM/view?usp=sharing




It doesn't say (SC) or (FTW), but I just checked my original (non modded) BIOS and it says 82.07.55.00.50.

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#49
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 20:20:32 (permalink)
That's a SC bios though, puzzling....

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#50
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 20:34:43 (permalink)
what should i do? should i stick with this bios and see if it does well.  Or play it safe and go with the FTW bios?

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#51
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 20:36:50 (permalink)
Its ok, bro, its not about the money. I like helping other people, plus it took 10 minutes to whip out that bios for you, since I've modded my own so many times. If you are feeling brave, do you wanna test the new power table mods too?
 
TDP
60900
105000
105000(100%)
 
PCI-E
75000
75000
79500(100%)
 
POWER LIMIT
43500
75000
105000(105%)
 
I'm using these setting too.
 

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#52
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 20:38:19 (permalink)
nah.  I can't afford a new card so i'm not going to risk more than I need to.  Thx though.
 
What is the difference between the SC and FTW bioses?  Is it noticeable?

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#53
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 20:40:09 (permalink)
just the version numbers, same specs, that's why its weird....and date stamp. I think we are ok with these.....keep it cool and watch for a few days and don't use furmark :p

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#54
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 20:48:03 (permalink)


post edited by DeathAngel74 - 2015/04/06 23:08:56

Attached Image(s)


Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#55
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/06 22:03:55 (permalink)
I have one more question.  Since my vram chips are cheaply made, is it ok to keep them at such a high clock rate of above 1500mhz?  What vram modules does your SC use?

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#56
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 22:35:54 (permalink)
that's why i set it so low. I have samsung. I think you will be safe between 3100-3300Mhz(6200-6600Mhz effective). Keep the card cool. Mine idles at 24-27C and its spring time here. Are you seeing artifacts? I think that is one sign of overheating vram. I have a favor to ask, could you post a copy of your original bios? I want to see its any different than mine...its dated 8/2014? I'm wondering if cross flashing is possible? Since I don't know what the difference is between our cards, except 10Mhz-core/boost.

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#57
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/06 22:41:12 (permalink)
My old 750, non-Ti could hit 6920 memory overclock. But my daughters knocked over the computer and killed it playing WWE in the living room. :( I miss that card....It snapped right at the connection tab, snapped clean off and the pc was upside-down when my wife and I came to see what had happened.....

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#58
hbzk100
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2015/01/28 21:22:49
  • Status: offline
  • Ribbons : 0
Re: Need to know about BIOS modding 2015/04/07 08:56:20 (permalink)
oh wow, bummer.  that must of hurt seeing $120 of GPU dead. lol.
 
Ill see if I can send you the .ROM soon.  If not then ill send you a bunch of screenshots of the bios.
 
For now i'm done with overclocking, I've actually gone to stock bios.  Since I can max all of my games at ultra 1080P 60fps at stock settings (using double the wattage for only a 100mhz boost isn't worth it In my opinion).  I was just curious how far I could push my GPU.  Thanks again!
 
Ill be keeping the rom that you gave me so if I do overclock again I can play around with that. :)

Ryzen 5 3600 | MSI B450 PRO CARBON AC | EVGA GeForce RTX 2060 SUPER XC ULTRA | G.Skill Trident Z RGB 3600MHz CL17 2x16GB | Fractal Design Torrent | Seasonic Prime 850W Titanium | Samsung 970 EVO 500GB | 960 EVO 250GB | 860 EVO 500GB | 850 PRO 256GB
#59
DeathAngel74
FTW Member
  • Total Posts : 1263
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: Need to know about BIOS modding 2015/04/10 19:15:28 (permalink)
Thanks, I tried the bios. I got a warning from NVFlash about flashing a FTW image(3842-3757) on a SC card(3842-3759), so I aborted the flash. Thanks for the share.

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
#60
Page: < 123 > Showing page 2 of 3
Jump to:
  • Back to Mobile