EVGA

Hot!NU Audio Pro Driver Release v1.0.1 (Win10)

Author
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 1875
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
2020/01/17 11:04:42 (permalink)
Hi Everyone, here's the latest driver for the NU Audio Pro Cards.  Lots of new items here.  This should fix the TeamSpeak/Discord issues people have described, along with a few other items people have been requesting.
Release Notes (v1.0.1):
  • Updates firmware to v1.4
  • Detects hardware status. Shows error code if fail.
  • Adds Speaker channel test function.
  • Fixes firmware update fail issue (version v0.4)
  • Updates Nahimic software to v1.0.3 (Fixes user-reported issues with programs, such as TeamSpeak and Discord)
  • Allows optional installation of Nahimic software*
*Note - If users choose not to install the Nahimic software, features including virtual surround, compressor, volume stabilizer, noise reduction and EQ options (including the 10-band equalizer) will not be available.
 
Let us know what you think, or if you run into any issues.  If you are using an older version of Windows and are running into one of these issues, please let me know and I will look into it.  However, please only request this if you are experiencing these issues.
#1

21 Replies Related Threads

    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 21441
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 116
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/17 11:13:00 (permalink)
    thanks for the update

    RTX Project EVGA X99 FTWK-5930K,EVGA2080Ti EVGA-1200P2  Nibbler EVGA X99 3-GPU Water Loop 1600P2  AIO Folding  1080Ti FTW3 Hybrid, 1200P
    Thank You for Your Support


    #2
    Juni0rm1nt
    New Member
    • Total Posts : 19
    • Reward points : 0
    • Joined: 2019/02/21 05:54:22
    • Status: offline
    • Ribbons : 0
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/17 11:25:46 (permalink)
    Great work EVGA team! When will the original Nu card receive this update?
     
    Thank you Lee!
    -JM
    #3
    EVGATech_LeeM
    EVGA Forum Moderator
    • Total Posts : 1875
    • Reward points : 0
    • Joined: 2016/11/04 14:43:35
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 14
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/17 11:26:20 (permalink)
    Juni0rm1nt
    Great work EVGA team! When will the original Nu card receive this update?
     
    Thank you Lee!
    -JM


    Current plan is Wednesday.
    #4
    Juni0rm1nt
    New Member
    • Total Posts : 19
    • Reward points : 0
    • Joined: 2019/02/21 05:54:22
    • Status: offline
    • Ribbons : 0
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/17 12:05:10 (permalink)
    Awesome! looking forward to it. 
    #5
    RizenBB
    New Member
    • Total Posts : 16
    • Reward points : 0
    • Joined: 2009/01/08 21:48:20
    • Location: Florida
    • Status: offline
    • Ribbons : 1
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/17 23:23:57 (permalink)
    Updated without issue today.

    - Rizen
    AMD Ryzen 9 3900X 
    MSI MEG X570 ACE
    32GB Corsair Vengeance DDR4 @ 3800 1:1 CL16
    NVIDIA Titan X Pascal
    EVGA Nu Audio Pro
    Samsung 970 Evo Plus 1TB, Crucial MX500 2TB
    EK waterblocks + custom loop cooling
    #6
    DKSang
    New Member
    • Total Posts : 86
    • Reward points : 0
    • Joined: 2008/05/13 04:09:56
    • Status: offline
    • Ribbons : 1
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/18 10:14:00 (permalink)
    NM.
    post edited by DKSang - 2020/01/18 14:27:20

    Intel Core i9-10940X, Asus TUF X299 Mark 2, 64GB  Kingston HyperX DDR4-3000, EVGA GeForce RTX 2080 XC HYBRID GAMING 08G-P4-2184-KR, Asus ROG Swift PG278Q, Corsair HX850i, Corsair H110i AIO, EVGA NU Audio, all wrapped in a Corsair Obsidian 600 case. 
    #7
    Hoggle
    EVGA Forum Moderator
    • Total Posts : 5550
    • Reward points : 0
    • Joined: 2003/10/13 22:10:45
    • Location: Eugene, OR
    • Status: offline
    • Ribbons : 3
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/18 14:17:10 (permalink)
    Looking forward to the update for the original NU Audio card but glad to see the pro getting an update.

    Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
     
     
    #8
    DannyW75
    New Member
    • Total Posts : 56
    • Reward points : 0
    • Joined: 2019/11/19 17:18:42
    • Status: offline
    • Ribbons : 1
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/20 20:29:50 (permalink)
    No problems with the new drivers here. The firmware on my card updated from 1.0 to 1.4 without issue as well.
    #9
    RMui
    New Member
    • Total Posts : 20
    • Reward points : 0
    • Joined: 2010/09/29 19:26:46
    • Status: offline
    • Ribbons : 2
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/01/25 09:55:58 (permalink)
    I just received my nu Audio Pro card, and tried to install the latest drivers, but kept getting a blue screen during the install process. The only way I was able to install the latest drivers was to install the 1.0 drivers first, then install the 1.0.1 drivers. Not sure if there were any software requirements for 1.0.1, but this was my experience.  
     
    #10
    MoDz Wave
    New Member
    • Total Posts : 1
    • Reward points : 0
    • Joined: 2020/02/01 20:01:31
    • Status: offline
    • Ribbons : 0
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/02/01 20:06:45 (permalink)
    RMui
    I just received my nu Audio Pro card, and tried to install the latest drivers, but kept getting a blue screen during the install process. The only way I was able to install the latest drivers was to install the 1.0 drivers first, then install the 1.0.1 drivers. Not sure if there were any software requirements for 1.0.1, but this was my experience.  
     


    Im having this problem too! I am also getting an error code after installing. ERROR: 0x0E01
    #11
    Omega_2
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2009/01/04 10:32:06
    • Status: offline
    • Ribbons : 0
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/02/02 01:51:15 (permalink)
    RMui
    I just received my nu Audio Pro card, and tried to install the latest drivers, but kept getting a blue screen during the install process. The only way I was able to install the latest drivers was to install the 1.0 drivers first, then install the 1.0.1 drivers. Not sure if there were any software requirements for 1.0.1, but this was my experience.

    So, if you haven't already installed the old version, and updated the firmware to that version's included firmware, you can't use the latest version's firmware update. You can't simply use the latest version to just 'skip up' a version.
    That's a train-wreck in itself, no wonder it took forever to install mine.
     
    Install current version, reboot, nothing worked, tried to figure out why it wasn't installed, reinstall again, reboot, still not installed. Repeat again, declining the reboot prompt and letting the installer finish. Device detected but not working. Reboot. Attempt to FW update. Get stuck in a loop of not being able to do anything. Force reboot. And then I find this post. Somehow, the site pushed the Nu Audio installer on me at some point too.
     
    If the FW needs to be updated from older FW incrementally, why not just include each of them in the current version's installer and set it so it knows that it needs to flash older FW cards up a version, bit by bit, instead of having to make two (or more) larger downloads?
    Or separate the FW tool from the software & driver installer so it can be run on its own have it check card FW then DL FW updates & flash them until the cards are current?

    :V
    #12
    RMui
    New Member
    • Total Posts : 20
    • Reward points : 0
    • Joined: 2010/09/29 19:26:46
    • Status: offline
    • Ribbons : 2
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/02/03 06:55:59 (permalink)
    That was my thinking too. If it's the latest version, I'm installing that first. It wasn't readily apparent to me that I needed to install the firmware from the 1.0. Honestly, I didn't even know that the drivers also included firmware updates.

    Thankfully once I figured it out the card works! However, I do agree that the firmware should have also been included in the latest update to avoid this issue or at least some warning to tell you to install the older version.
    #13
    The_Professor
    New Member
    • Total Posts : 39
    • Reward points : 0
    • Joined: 2012/04/04 09:56:11
    • Status: offline
    • Ribbons : 0
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/02/03 09:07:38 (permalink)
    Hi Lee,
    today I got also an Nu Audio Pro Card. The only "bug" I found is, after Sleeping the Bitrate is change to 24bit 44000khz without doing anything. I got an Intel System, this is not a big problem, because I can change it easly back to 32 192000 (my default), but it is something you have to know.
    But I think this is still an open point on the list, I read this 2-3 times.
    post edited by The_Professor - 2020/02/03 09:11:44
    #14
    EVGATech_LeeM
    EVGA Forum Moderator
    • Total Posts : 1875
    • Reward points : 0
    • Joined: 2016/11/04 14:43:35
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 14
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/02/03 14:20:44 (permalink)
    Sorry everyone, let me check into the firmware installation issue to see if that's expected behavior.
     
    @Professor, I'll report this as well.
    #15
    playboyer
    New Member
    • Total Posts : 67
    • Reward points : 0
    • Joined: 2007/07/18 01:36:24
    • Status: offline
    • Ribbons : 0
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/02/26 04:11:10 (permalink)
    EVGATech_LeeM
    Sorry everyone, let me check into the firmware installation issue to see if that's expected behavior.
     
    @Professor, I'll report this as well.

    So...any word yet? I was having issues installing this newer driver (skipped the first version) after installing the pro card. The software seemed kinda weird too. Switching back and forth from headphone to desktop speaker and but audio would not come out the either speakers. Wouldn't even hear the clicking on the card when I would stitch back and forth.
    post edited by playboyer - 2020/02/26 04:28:41
    #16
    EVGATech_LeeM
    EVGA Forum Moderator
    • Total Posts : 1875
    • Reward points : 0
    • Joined: 2016/11/04 14:43:35
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 14
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/02/27 11:23:25 (permalink)
    Seems the changing/resetting issue might be related to using the card in Hi-Res Mode.  I'll have a test driver soon that should fix that.
    #17
    kazu4009
    New Member
    • Total Posts : 28
    • Reward points : 0
    • Joined: 2010/04/12 22:18:43
    • Location: Japan
    • Status: offline
    • Ribbons : 1
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/03/01 17:51:01 (permalink)
    Monsterhunter World Iceborne
    The sound may be interrupted by PCIE 4GEN.
    PCIE 3GEN is fine.
     
     
    AMD Ryzen9 3950X
     X570 AORUS MASTER
     Ballistix ELITE DDR4-3600 8GBx4
     AORUS GV-R57XTAORUS-8GD
     EVGA NU AUDIO PRO
     Corsair MP600 1TB & Samsung 970 EVO Plus 512GB
     Corsair HX1200i
     Crystal LIAN LI O11 Dynamic
     Black Ice SR-1 560


     
    #18
    EVGATech_LeeM
    EVGA Forum Moderator
    • Total Posts : 1875
    • Reward points : 0
    • Joined: 2016/11/04 14:43:35
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 14
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/03/02 11:14:37 (permalink)
    kazu4009
    Monsterhunter World Iceborne
    The sound may be interrupted by PCIE 4GEN.
    PCIE 3GEN is fine.
     
     
    AMD Ryzen9 3950X
    X570 AORUS MASTER
    Ballistix ELITE DDR4-3600 8GBx4
    AORUS GV-R57XTAORUS-8GD
    EVGA NU AUDIO PRO
    Corsair MP600 1TB & Samsung 970 EVO Plus 512GB
    Corsair HX1200i
    Crystal LIAN LI O11 Dynamic
    Black Ice SR-1 560

    Thanks for the feedback.  We're currently looking into potential PCIe 4.0 issues.  Have you tried this without the Nahimic EQ installed to see if the issues persist?
    #19
    EVGATech_LeeM
    EVGA Forum Moderator
    • Total Posts : 1875
    • Reward points : 0
    • Joined: 2016/11/04 14:43:35
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 14
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/03/02 11:17:42 (permalink)
    EVGATech_LeeM
    Seems the changing/resetting issue might be related to using the card in Hi-Res Mode.  I'll have a test driver soon that should fix that.

     
    Here's a beta driver for those of you who are running into issues with the Sample Rate changing after sleep:
    https://cdn.evga.com/nuaudiopro/EVGA%20NU%20Audio%20Pro_1.0.1.2_WIN10beta.exe
    #20
    kazu4009
    New Member
    • Total Posts : 28
    • Reward points : 0
    • Joined: 2010/04/12 22:18:43
    • Location: Japan
    • Status: offline
    • Ribbons : 1
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/03/02 14:48:18 (permalink)
    I tried but it was no good.
    #21
    playboyer
    New Member
    • Total Posts : 67
    • Reward points : 0
    • Joined: 2007/07/18 01:36:24
    • Status: offline
    • Ribbons : 0
    Re: NU Audio Pro Driver Release v1.0.1 (Win10) 2020/03/03 19:23:48 (permalink)
    EVGATech_LeeM
    EVGATech_LeeM
    Seems the changing/resetting issue might be related to using the card in Hi-Res Mode.  I'll have a test driver soon that should fix that.

     
    Here's a beta driver for those of you who are running into issues with the Sample Rate changing after sleep:
    https://cdn.evga.com/nuaudiopro/EVGA%20NU%20Audio%20Pro_1.0.1.2_WIN10beta.exe


    I put my computer to sleep and when it woke up my I noticed my sample rate changed and this beta driver fixed it.  Thanks.
    #22
    Jump to:
  • Back to Mobile