FalconX79Dark
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2013/10/01 19:42:29
- Status: offline
- Ribbons : 2
Bought a really cool Lamptron FC5 V3 fan control and wondered why EVGA is not making something like this? Would round out your product line and they have a longer shelf life. Dedicated fan controls allow you to achieve higher over-clocks because the voltage on the MB is more stable with dedicated Fan Control. This product lends itself well to your enthusiast market. Does not require software. http://www.lamptron.com/2...-best-just-got-better/ If you have a product that you would like to see invented or redesigned please add it to this thread.
EVGA X79 Dark/EVGA GeForce GTX 1080 FTW Hydro Copper in SLI/Caselabs Black Magnum M8/Lamptron FC5 V3 Fan Control/I7-4930K/ Raystorm Copper CPU block/Twin D5 vario pumps with Dual Bay Reservoir/XSPC glass Photon Tube Reservoir 270mm/AX Triple Radiator/32 Gb G.Skill DDR3-2400 CL10-12-12-31/ Samsung 850 Pro 2 Tb/EVGA SuperNOVA 1200 P2 Power Supply/Win 10 64/ ASUS ROG Swift PG278QR 27" G-SYNC 165Hz Gaming Monitor 2560x1440, 1ms, 1,000:1| EVGA Nu Audio Pro 7.1 Sound Card/Razer Nommo Pro 2.1 THX-certified speakers/Razer Tiamat True 7.1 gaming headset.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30974
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: NEW products I would like EVGA make
2017/01/06 13:23:47
(permalink)
So maybe take the DG-87 Fan controller and temp display and make a stand alone unit, that fits in a 5 1/4 bay
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: NEW products I would like EVGA make
2017/01/06 15:03:30
(permalink)
EVGA should procude own custom affordable watercooling stuff for their hardware. Every new product is challenge for manufacturer, special when other manufacturers hold market few years and have own customers. For now EVGA had success with PSU and Cases. They make very nice cases and every enthusiasts like them. Today it's very hard to find nice PC case for high end RIGs. EVGA DG-87, Caselabs, Lian-Li and In Win... and CORSAIR 900D or few CM models.
|
btodd1
Superclocked Member
- Total Posts : 128
- Reward points : 0
- Joined: 2010/10/18 13:53:11
- Status: offline
- Ribbons : 1
Re: NEW products I would like EVGA make
2017/01/06 15:19:35
(permalink)
As I am a big EVGA Fan, I would like to see this. I just got an FX one for Christmas that does LED Blue and Red. If EVGA made one, I'd buy it! : - ) Bret
MB:EVGA Z370 FTW/CPU:Intel Core i5 9600k/VIDEO: EVGA GTX 1080 Ti FTW3 Hybrid/MEM:G-Skill Titan Z Series 3000MHz 32G/PSU:Corsair RM1000 Gold-Modular/CPU Cooling: Corsair H115i RGBCombat Names History: FPSIdiot G Battlefield 2042 Warzone COD 1ID10T in Battlefield 3,4 Hardline, Battlefront Makoto Nagano in BFBC2, Bruce Willis in Battlefield 2142, Call of Duty, Battlefield 2, Joint Operations, and Black Hawk Down. (Started with the BHD beta in 2001/2002). First FPS war game DOOM in the 1990's
|
FalconX79Dark
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2013/10/01 19:42:29
- Status: offline
- Ribbons : 2
Re: NEW products I would like EVGA make
2017/01/06 19:43:41
(permalink)
I was thinking the same thing about stand alone units. The cases have changed drastically but the front features of the PC has changed very little in 20 years. An on off switch, reset, microphone jack, USB 2.0 and USB. 3.0 and maybe a fan controller which is boring with a capital B. There are dozens of interesting bling products that could be made in modular form that could be swapped in and out of front of any PC. Take the display from their up and coming keyboard, they could put that in a 5.25 bay. EVGA needs to take a bite out of EK. Why not EVGA G1/4 liquid wireless plug sensors for their liquid blocks and fittings. Modular devices for 5.25 bays (short devices) with brushed aluminum that could snap in and out of EVGA faceplates: air temperature gauge liquid temperature gauge Volt meter Amp meter PSU meter Evbot meter Bios display for front panel Fan controls Water pump controls high speed charging ports for phones lighting controls+inverters wireless and Bluetooth sensors wired sensors air velocity Electrical Switches for modding Gallons per minute flow display Fan RPM+Temp+Volt Clock GPU clock CPU clocks Come on EVGA make bay drives sexy. 5.25 bay devices have reached about 1% of their potential. For modding the problem is that if you buy one XSPC one Koolance one Lamptron device they all have different faceplates and different brushed aluminum. Buy Case Labs would be a very good purchase for EVGA. Buy a company that custom makes individually sleeved cables. My god why can't someone fix those @#$% molex connectors. How about an EVGA male female retrofit plug that joins two molex. Easy to connect the EVGA part to the Molex and easy to snap the molex together or apart. How about a tool line EVGA for modding.
EVGA X79 Dark/EVGA GeForce GTX 1080 FTW Hydro Copper in SLI/Caselabs Black Magnum M8/Lamptron FC5 V3 Fan Control/I7-4930K/ Raystorm Copper CPU block/Twin D5 vario pumps with Dual Bay Reservoir/XSPC glass Photon Tube Reservoir 270mm/AX Triple Radiator/32 Gb G.Skill DDR3-2400 CL10-12-12-31/ Samsung 850 Pro 2 Tb/EVGA SuperNOVA 1200 P2 Power Supply/Win 10 64/ ASUS ROG Swift PG278QR 27" G-SYNC 165Hz Gaming Monitor 2560x1440, 1ms, 1,000:1| EVGA Nu Audio Pro 7.1 Sound Card/Razer Nommo Pro 2.1 THX-certified speakers/Razer Tiamat True 7.1 gaming headset.
|
FalconX79Dark
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2013/10/01 19:42:29
- Status: offline
- Ribbons : 2
Re: NEW products I would like EVGA make
2017/01/06 20:01:46
(permalink)
The back of the PC is also a pretty underutilized area with so many empty slots between cards. I like what Lamptron has done with their CP120 PCI Fan Controller. http://www.lamptron.com/2016/08/08/lamptron-cp120-pci-fan-controller/ Other ideas for those rear slots are: PCI size fans Wired light controls Wireless light controls. Single slot dedicated PhysX card.
EVGA X79 Dark/EVGA GeForce GTX 1080 FTW Hydro Copper in SLI/Caselabs Black Magnum M8/Lamptron FC5 V3 Fan Control/I7-4930K/ Raystorm Copper CPU block/Twin D5 vario pumps with Dual Bay Reservoir/XSPC glass Photon Tube Reservoir 270mm/AX Triple Radiator/32 Gb G.Skill DDR3-2400 CL10-12-12-31/ Samsung 850 Pro 2 Tb/EVGA SuperNOVA 1200 P2 Power Supply/Win 10 64/ ASUS ROG Swift PG278QR 27" G-SYNC 165Hz Gaming Monitor 2560x1440, 1ms, 1,000:1| EVGA Nu Audio Pro 7.1 Sound Card/Razer Nommo Pro 2.1 THX-certified speakers/Razer Tiamat True 7.1 gaming headset.
|
Nereus
Captain Goodvibes
- Total Posts : 18915
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: NEW products I would like EVGA make
2017/01/06 20:56:29
(permalink)
Vlada011 EVGA should procude own custom affordable watercooling stuff for their hardware.
Wish granted. Have a look at this video from CES 2017 at around the 3 minute mark - EVGA are showing a system similar to EK Predator AIO units - including CPU cooler, GPU coolers, radiators, all with the EVGA logo and all with the pre-filled quick-release plugs like the EK Predator systems. No idea what the pricing will be or when it will be released, or whether it's just a concept and it may never hit the production line.. who knows. Also a new SC15 laptop there worth a look. I keep hoping the AIO cooler for the Titan XP comes out - Jacob was hoping it would be out by end of 2016, but that's been and gone and no word, so I think they've given up on it.. it's either go with the 1080 AIO workaround, which is functional but doesn't look the best, or go with the expensive EK Predator setup.. or a full custom loop of course.
|
FalconX79Dark
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2013/10/01 19:42:29
- Status: offline
- Ribbons : 2
Re: NEW products I would like EVGA make
2017/01/06 22:52:40
(permalink)
A line of PSU specifically designed for hydro cooled PC's. Real need for a MB bypass switch on the PSU so you don't have to unplug the mother board and plug in the 24 pin bypass adapter every time you want to drain/fill the water loop or test lighting. The problem with EVGA is it brings these wonderful products to CES every year but the development cycle is too long, the tool and die setup is too high, and the products become obsolete too fast. EVGA needs some bread and butter basic products like fan controls, gauges, fittings, SLI liquid connectors, and CCFL inverters that will have a long 3-5 year product life cycle.
EVGA X79 Dark/EVGA GeForce GTX 1080 FTW Hydro Copper in SLI/Caselabs Black Magnum M8/Lamptron FC5 V3 Fan Control/I7-4930K/ Raystorm Copper CPU block/Twin D5 vario pumps with Dual Bay Reservoir/XSPC glass Photon Tube Reservoir 270mm/AX Triple Radiator/32 Gb G.Skill DDR3-2400 CL10-12-12-31/ Samsung 850 Pro 2 Tb/EVGA SuperNOVA 1200 P2 Power Supply/Win 10 64/ ASUS ROG Swift PG278QR 27" G-SYNC 165Hz Gaming Monitor 2560x1440, 1ms, 1,000:1| EVGA Nu Audio Pro 7.1 Sound Card/Razer Nommo Pro 2.1 THX-certified speakers/Razer Tiamat True 7.1 gaming headset.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: NEW products I would like EVGA make
2017/01/07 00:15:27
(permalink)
I always think on custom loop, now I even think to avoid M.2 to build custom loop because XSPC launch some crazy pump/reservoir name Ion. Madness. Real innovation on market... He is very easy for installation on any Nereus
Vlada011 EVGA should procude own custom affordable watercooling stuff for their hardware.
Wish granted. Have a look at this video from CES 2017 at around the 3 minute mark - EVGA are showing a system similar to EK Predator AIO units - including CPU cooler, GPU coolers, radiators, all with the EVGA logo and all with the pre-filled quick-release plugs like the EK Predator systems. No idea what the pricing will be or when it will be released, or whether it's just a concept and it may never hit the production line.. who knows. Also a new SC15 laptop there worth a look. I keep hoping the AIO cooler for the Titan XP comes out - Jacob was hoping it would be out by end of 2016, but that's been and gone and no word, so I think they've given up on it.. it's either go with the 1080 AIO workaround, which is functional but doesn't look the best, or go with the expensive EK Predator setup.. or a full custom loop of course.
WOW, some real nice stuff... new case DG-7, new graphic cards with new backplates and cooler, and CPU coolers. Did you saw fans, I like them. I constantly think on custom loop but I'm aware that I can't afford. Now when XSPC launched Ion (pump/reservoir) I wish custom loop even more but I must satisfied with AIO system. These new backplates from video clip on EVGA GTX1080 and GTX1070 are nicest comparing to last few years. I think they should stay similar in future with no or only little changes.
post edited by Vlada011 - 2017/01/07 00:18:21
|
btodd1
Superclocked Member
- Total Posts : 128
- Reward points : 0
- Joined: 2010/10/18 13:53:11
- Status: offline
- Ribbons : 1
Re: NEW products I would like EVGA make
2017/01/08 12:59:33
(permalink)
Nereus
Vlada011 EVGA should procude own custom affordable watercooling stuff for their hardware.
Wish granted. Have a look at this video from CES 2017 at around the 3 minute mark - EVGA are showing a system similar to EK Predator AIO units - including CPU cooler, GPU coolers, radiators, all with the EVGA logo and all with the pre-filled quick-release plugs like the EK Predator systems. No idea what the pricing will be or when it will be released, or whether it's just a concept and it may never hit the production line.. who knows. Also a new SC15 laptop there worth a look. I keep hoping the AIO cooler for the Titan XP comes out - Jacob was hoping it would be out by end of 2016, but that's been and gone and no word, so I think they've given up on it.. it's either go with the 1080 AIO workaround, which is functional but doesn't look the best, or go with the expensive EK Predator setup.. or a full custom loop of course.
WOW. Thanks for sharing! Lots of great stuff coming out soon! Thanks, Bret
MB:EVGA Z370 FTW/CPU:Intel Core i5 9600k/VIDEO: EVGA GTX 1080 Ti FTW3 Hybrid/MEM:G-Skill Titan Z Series 3000MHz 32G/PSU:Corsair RM1000 Gold-Modular/CPU Cooling: Corsair H115i RGBCombat Names History: FPSIdiot G Battlefield 2042 Warzone COD 1ID10T in Battlefield 3,4 Hardline, Battlefront Makoto Nagano in BFBC2, Bruce Willis in Battlefield 2142, Call of Duty, Battlefield 2, Joint Operations, and Black Hawk Down. (Started with the BHD beta in 2001/2002). First FPS war game DOOM in the 1990's
|
FalconX79Dark
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2013/10/01 19:42:29
- Status: offline
- Ribbons : 2
Re: NEW products I would like EVGA make
2017/01/12 11:25:31
(permalink)
I like the look of the ion pump but not sure how you would clean the loop because the pump is below the lines. EVGA could start easily by making reservoirs like XSPC photon tubes.
EVGA X79 Dark/EVGA GeForce GTX 1080 FTW Hydro Copper in SLI/Caselabs Black Magnum M8/Lamptron FC5 V3 Fan Control/I7-4930K/ Raystorm Copper CPU block/Twin D5 vario pumps with Dual Bay Reservoir/XSPC glass Photon Tube Reservoir 270mm/AX Triple Radiator/32 Gb G.Skill DDR3-2400 CL10-12-12-31/ Samsung 850 Pro 2 Tb/EVGA SuperNOVA 1200 P2 Power Supply/Win 10 64/ ASUS ROG Swift PG278QR 27" G-SYNC 165Hz Gaming Monitor 2560x1440, 1ms, 1,000:1| EVGA Nu Audio Pro 7.1 Sound Card/Razer Nommo Pro 2.1 THX-certified speakers/Razer Tiamat True 7.1 gaming headset.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: NEW products I would like EVGA make
2017/01/13 07:39:04
(permalink)
EVGA should launch one short sleeved cable set for small PSU and small PC case. If people want to build some Mini ITX Case with their PSU need shorter cable set. Only one option without any sleeve or black sleeve. But arround 20cm long or similar lenght.
|
FalconX79Dark
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2013/10/01 19:42:29
- Status: offline
- Ribbons : 2
Re: NEW products I would like EVGA make
2017/01/13 08:23:05
(permalink)
Vlada011 EVGA should launch one short sleeved cable set for small PSU and small PC case. If people want to build some Mini ITX Case with their PSU need shorter cable set. Only one option without any sleeve or black sleeve. But arround 20cm long or similar lenght.
That would be a great product idea Vlada011. Have been looking at IceModz a lot lately. They offers shorter lengths. I wish EVGA offered a similar custom approach to cables. http://www.icemodz.eu/sleevetool/
EVGA X79 Dark/EVGA GeForce GTX 1080 FTW Hydro Copper in SLI/Caselabs Black Magnum M8/Lamptron FC5 V3 Fan Control/I7-4930K/ Raystorm Copper CPU block/Twin D5 vario pumps with Dual Bay Reservoir/XSPC glass Photon Tube Reservoir 270mm/AX Triple Radiator/32 Gb G.Skill DDR3-2400 CL10-12-12-31/ Samsung 850 Pro 2 Tb/EVGA SuperNOVA 1200 P2 Power Supply/Win 10 64/ ASUS ROG Swift PG278QR 27" G-SYNC 165Hz Gaming Monitor 2560x1440, 1ms, 1,000:1| EVGA Nu Audio Pro 7.1 Sound Card/Razer Nommo Pro 2.1 THX-certified speakers/Razer Tiamat True 7.1 gaming headset.
|
un4givn85
SSC Member
- Total Posts : 903
- Reward points : 0
- Joined: 2011/02/01 14:35:34
- Location: MT
- Status: offline
- Ribbons : 1
Re: NEW products I would like EVGA make
2017/02/10 15:17:51
(permalink)
How about a PCI-e slot fan that is aimed at the M.2 slot?
|
Nereus
Captain Goodvibes
- Total Posts : 18915
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: NEW products I would like EVGA make
2017/02/10 17:21:44
(permalink)
How about the Titan XP AIO cooler we've been hearing about for around 6 months lol.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: NEW products I would like EVGA make
2017/02/10 17:32:14
(permalink)
Nereus How about the Titan XP AIO cooler we've been hearing about for around 6 months lol.
i have a gut feeling, if that AIO comes out, it will not be for the Titan X(p) but maybe another GPU with the EXACT same physical PCB layout... if you get my drift... Hence why when AMD started dragging their feet with the new GPU's, and NVidia didn't launch anything new, the AIO was delayed. If NVidia were to launch a new card, and it were to have the same PCB, then EVGA would actually be releasing their own card with the AIO and as a stand alone kit as well. But since AMD isn't challenging NVidia in any way, NVidia has no incentive to give us a new card.
post edited by Scarlet-Tech - 2017/02/10 17:38:33
|
Nereus
Captain Goodvibes
- Total Posts : 18915
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: NEW products I would like EVGA make
2017/02/10 21:07:23
(permalink)
Scarlet-Tech
Nereus How about the Titan XP AIO cooler we've been hearing about for around 6 months lol.
i have a gut feeling, if that AIO comes out, it will not be for the Titan X(p) but maybe another GPU with the EXACT same physical PCB layout... if you get my drift... Hence why when AMD started dragging their feet with the new GPU's, and NVidia didn't launch anything new, the AIO was delayed. If NVidia were to launch a new card, and it were to have the same PCB, then EVGA would actually be releasing their own card with the AIO and as a stand alone kit as well. But since AMD isn't challenging NVidia in any way, NVidia has no incentive to give us a new card.
That would be disappointing since we Titan XP owners have been told an AIO was definitely coming from EVGA for months (originally expected before the end of 2016), but the 'when' keeps getting pushed forward. If it's the exact same layout as a ..umm ..yet to be released GPU ..well that works. :) ..but who knows when that might happen, if ever. A little sad that those who have spent so much on a top-of-the-line card are being left hanging while others are not - although NVidia didn't let anyone else release the Titan XP, so it's not really EVGA's fault. Regardless, it's a bit of a kick in the teeth, but NVidia are too big to care unfortunately.
|
MSim
Omnipotent Enthusiast
- Total Posts : 14685
- Reward points : 0
- Joined: 2005/05/22 23:13:30
- Location: Earth
- Status: offline
- Ribbons : 38
Re: NEW products I would like EVGA make
2017/03/31 03:02:54
(permalink)
I'd like to see eVGA make a 32/64GB USB 3.0 Flash Drive, have it glow under eVGA logo in white or green. Long as the price is somewhat competitive, people will probably buy one. A good use for it would be to make a windows 10 USB boot drive, you can also put a folder on it to hold all the software/drivers you need after formatting. You could make a 8GB version to include with eVGA motherboards, that contains mobo drivers/software.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: NEW products I would like EVGA make
2017/03/31 04:01:20
(permalink)
MSim I'd like to see eVGA make a 32/64GB USB 3.0 Flash Drive, have it glow under eVGA logo in white or green. Long as the price is somewhat competitive, people will probably buy one. A good use for it would be to make a windows 10 USB boot drive, you can also put a folder on it to hold all the software/drivers you need after formatting. You could make a 8GB version to include with eVGA motherboards, that contains mobo drivers/software.
Good idea.
|
PietroBR
FTW Member
- Total Posts : 1202
- Reward points : 0
- Joined: 2013/09/14 06:40:52
- Location: Brazil
- Status: offline
- Ribbons : 7
Re: NEW products I would like EVGA make
2017/04/11 06:36:20
(permalink)
Not a new product, but an update. I would love to see some new EVGA DDR4 Ram Sticks (new heatsink, RGB, etc).
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: NEW products I would like EVGA make
2017/08/30 10:02:12
(permalink)
EVGA should offer some extra quality gaming pads to their fans with their logo. 3-4 different size, aluminum pad and something similar. They don't need constantly to produce new mice models to offer mouse pads and advertising and gaming stuff. I mean on really big mouse keyboard pads for all table and normal size and some ultra durable from strong material as metal or aluminum optimized to work perfectly. They could change their logo from time to time... Owners of K|NGP|N cards would like to see their mouse pads. Some really premium stuff as K|NGP|N Edition should arrive with small mouse pad as gift, etc... Mouse pads should have durable edges and need to be launched with every new series of products. They could print different pictures from overclocking of GPUs by K|NGP|N, EVGA Logo, small EVGA Logo in corner. If customers want clean and black mouse pad with only logo than other side could be printed with different pictures. Price of good mouse pads could go from 20-50$ depend of size and material, durability, etc... I'm sure they there is some new extra materials capable to rool and in same size to last as metal pad capable to wash in soap without problems, durable on dust, dirty, etc...
|
quadlatte
CLASSIFIED ULTRA Member
- Total Posts : 7191
- Reward points : 0
- Joined: 2006/09/14 16:52:58
- Location: Greensboro, NC
- Status: offline
- Ribbons : 56
Re: NEW products I would like EVGA make
2017/08/30 17:43:07
(permalink)
FalconX79Dark
Vlada011 EVGA should launch one short sleeved cable set for small PSU and small PC case. If people want to build some Mini ITX Case with their PSU need shorter cable set. Only one option without any sleeve or black sleeve. But arround 20cm long or similar lenght.
That would be a great product idea Vlada011. Have been looking at IceModz a lot lately. They offers shorter lengths. I wish EVGA offered a similar custom approach to cables. http://www.icemodz.eu/sleevetool/
yes. alot people are doing SFF now and shorter cables would be awesome.
|
09973
iCX Member
- Total Posts : 474
- Reward points : 0
- Joined: 2008/01/10 11:05:19
- Status: offline
- Ribbons : 2
Re: NEW products I would like EVGA make
2017/09/02 13:19:24
(permalink)
FalconX79Dark
Vlada011 EVGA should launch one short sleeved cable set for small PSU and small PC case. If people want to build some Mini ITX Case with their PSU need shorter cable set. Only one option without any sleeve or black sleeve. But arround 20cm long or similar lenght.
That would be a great product idea Vlada011. Have been looking at IceModz a lot lately. They offers shorter lengths. I wish EVGA offered a similar custom approach to cables. http://www.icemodz.eu/sleevetool/
I actually got one 24pin ATX 30CM extension and two PCIe 30CM extensions from IceModz, and they are ok. He did the lengths incorrectly on my ATX 24 pin cable so it does not sit correctly even after extensive cable training to try and force it to sit correctly. The PCIe extension turned out well tho.
As long as your popular enough, you can get away with anything.
|
greensoldierusa
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2017/08/28 04:57:24
- Status: offline
- Ribbons : 0
Re: NEW products I would like EVGA make
2017/09/04 00:04:05
(permalink)
PietroBR Not a new product, but an update. I would love to see some new EVGA DDR4 Ram Sticks (new heatsink, RGB, etc).
This would definitely be nice option. Might as well throw in a heat spreader color option for the memory.
|
PietroBR
FTW Member
- Total Posts : 1202
- Reward points : 0
- Joined: 2013/09/14 06:40:52
- Location: Brazil
- Status: offline
- Ribbons : 7
Re: NEW products I would like EVGA make
2017/09/04 04:44:51
(permalink)
greensoldierusa
PietroBR Not a new product, but an update. I would love to see some new EVGA DDR4 Ram Sticks (new heatsink, RGB, etc).
This would definitely be nice option. Might as well throw in a heat spreader color option for the memory.
Yeah. Those memorys have crazy performance. But, a shame it can only be bought at Micro Center.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102251
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: NEW products I would like EVGA make
2017/09/04 05:55:51
(permalink)
Worldwide distribution of EVGA memory would be nice.
|
greensoldierusa
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2017/08/28 04:57:24
- Status: offline
- Ribbons : 0
Re: NEW products I would like EVGA make
2017/09/04 06:45:44
(permalink)
rjohnson11 Worldwide distribution of EVGA memory would be nice.
Agreed ten fold
|
PietroBR
FTW Member
- Total Posts : 1202
- Reward points : 0
- Joined: 2013/09/14 06:40:52
- Location: Brazil
- Status: offline
- Ribbons : 7
Re: NEW products I would like EVGA make
2017/09/04 06:47:05
(permalink)
rjohnson11 Worldwide distribution of EVGA memory would be nice.
And here I am, just wishing one day EVGA will make it possible to buy from their website in Brazil. One day maybe, one day...
|
greensoldierusa
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2017/08/28 04:57:24
- Status: offline
- Ribbons : 0
Re: NEW products I would like EVGA make
2017/09/04 13:05:59
(permalink)
I think we forget in the US the hoops others have to go through
|
greensoldierusa
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2017/08/28 04:57:24
- Status: offline
- Ribbons : 0
Re: NEW products I would like EVGA make
2017/09/04 14:25:12
(permalink)
Gaming monitor would be great ... I mean why not just no red black them please
|