shaolin95
Do you guys run ECO mode on the P2?

Cool GTX
Power Supply Calculator - PSU Calculator | OuterVision
 
I have a few EVGA 1200W P2 & they work well - using them 24/7
 
my rule of thumb ... 100% expected load does not exceed 80-85% of PSU rated load
 
keep the PSU cool & clean - just like any electronic device - for best life

shaolin95
So this is so weird.
My computer was giving me some issues booting yesterday like ntfs.sys page_fault_in_nonpaged_area.
This started just yesterday and all I was doing was testing my radiator fans pull and push then running benchmarks. I thought it may be nvme or RAM related so yesterday I reseat the RAM and it seems to be back to normal rebooting normally without the error.
This morning I wanted to make sure it was all good so I was running one 3Dmark test to see and suddenly the monitor went black and I thought it was going to reboot but suddenly I hard this POP and saw kind of a flash of light from where I think was the PSU rear part and the breaker in the room tripped.
Of course, now I am dying to find out what if anything else died and no idea what happened here. Was the PSU just failing to handle my gear? It is a 5950x and an Asus strix RTX 3080 with many HDDs.
So I want to test my system immediately and my only options locally is a local seller selling used PSUs...he has the eVGA 1600W G2 and the 1200W P2. It seems the P2 and G3 use the same cables although I may not want to reuse the cables after the experience or at least not the main cables but maybe just keep the sata cables from the G3 since it was a pain to wire all the HDDs and hide cables.
 
So confusing as to what happened here. :/
 
 

kik_kek

shaolin95
So this is so weird.
My computer was giving me some issues booting yesterday like ntfs.sys page_fault_in_nonpaged_area.
This started just yesterday and all I was doing was testing my radiator fans pull and push then running benchmarks. I thought it may be nvme or RAM related so yesterday I reseat the RAM and it seems to be back to normal rebooting normally without the error.
This morning I wanted to make sure it was all good so I was running one 3Dmark test to see and suddenly the monitor went black and I thought it was going to reboot but suddenly I hard this POP and saw kind of a flash of light from where I think was the PSU rear part and the breaker in the room tripped.
Of course, now I am dying to find out what if anything else died and no idea what happened here. Was the PSU just failing to handle my gear? It is a 5950x and an Asus strix RTX 3080 with many HDDs.
So I want to test my system immediately and my only options locally is a local seller selling used PSUs...he has the eVGA 1600W G2 and the 1200W P2. It seems the P2 and G3 use the same cables although I may not want to reuse the cables after the experience or at least not the main cables but maybe just keep the sata cables from the G3 since it was a pain to wire all the HDDs and hide cables.
 
So confusing as to what happened here. :/
 
 

Sorry for digging this post up but did the ntfs.sys page_fault_in_nonpaged_area bsod disappear after the PSU replacement? I have them quite often when booting and tried a fresh windows install but no dice. Initially I thought it was on of my hdds acting up but a couple days after removing it from the PC the bsods started occuring again. So I'm suspecting my 750W xfx psu as the source of the problem, especially since I think it might be underpowered for my 6800XT+5900X with a bunch of storage and a lot of fans.