Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/12 18:14:04
(permalink)
That's the new beta driver. I usually wait for the official release. However you could have bad memory on your card. There is a tool called memtest 80 that will test your GPU memory. If it finds errors on your memory that is why it throws errors and will be no good for folding. Here is the link, read the directions in the Documentation link. http://folding.stanford.edu/English/DownloadUtils
|
GhostImage
iCX Member
- Total Posts : 358
- Reward points : 0
- Joined: 2008/09/21 11:49:30
- Status: offline
- Ribbons : 2
Re:Multi GPU guide with WinFC
2009/11/12 18:25:33
(permalink)
Thanks man, will do. Downloading now. Probably will test tomorrow. Ill see how it goes. Getting really Sleeeeppy now. Long day at the "office" . -"That's the new beta driver. I usually wait for the official release." So true. However once in a while betas are better than certified. Thats not the case now methinks. Cheers.
|
Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/12 18:35:45
(permalink)
Good luck. I'll checck back on this thread tomorrow and see if post any results.
|
GhostImage
iCX Member
- Total Posts : 358
- Reward points : 0
- Joined: 2008/09/21 11:49:30
- Status: offline
- Ribbons : 2
Re:Multi GPU guide with WinFC
2009/11/13 15:09:31
(permalink)
Hello there. :) I have good news!! folding with 2GPUs now. Ran Memtest 80 today came all clean. I had to Downclock a Lot though Right away 1728 instead of 1890 :( But Ill work it's way up Bit by bit til I find my comfy level. Running on 195.xx Beta. So far no problems. Cpu 9450 52c folding Gpu 285 62c folding Gpu 250 52c folding Now I just have to set VM on a Cpu. :) Thank you for all your input It was very helpful. Fold On. PS no BR yet??? ^^ and Sticky Please.
|
Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/13 15:13:30
(permalink)
Your welcome. Your temps look good. That is what my 285's run at.
|
Tasmac
FTW Member
- Total Posts : 1218
- Reward points : 0
- Joined: 2009/03/19 20:33:38
- Location: Anderson, South Carolina
- Status: offline
- Ribbons : 4
Re:Multi GPU guide with WinFC
2009/11/13 15:25:43
(permalink)
wb488641 Horvat I have not read that thread, please post a link to it. I have no problem with the 191.07 drivers and I have it on all my Rigs. Refer to my sig. I have two X58 boards, a G41 and what ever a Dell Vostro is, I think it is a G33. it only affect the NF200 chipset. try another driver higher than 191.07 on the E759 mobo, until we know what is the issue with 191.07 driver. WB FYI , I am using 191.07 on a non-NF200 chipset mobo with mixed cards.. without sli .. just dummy plugs and download the new fahcore 11 and 14 for the mixed card folding .. good Luck hmmm the classy E759, thats what i have and im running 191.07 drivers.........seems to be ok sorry just read this post and was shocked, but everything is oky doky with drivers.......so far now im nervous lol
|
_Nite_
Insert Custom Title Here
- Total Posts : 19175
- Reward points : 0
- Joined: 2007/04/18 15:35:04
- Location: Sumner, Washington
- Status: offline
- Ribbons : 46
Re:Multi GPU guide with WinFC
2009/11/13 16:44:49
(permalink)
Gaming Rig: AMD Ryzen 7 2700x @ 4.25Ghz - Asrock B450 Pro 4 - 16GB Crucial Ballistix DDR4 3000 - 240GB SSD (OS), 1TB ADATA SU800 SSD and 2TB ADATA SX8200 Pro M2 NVME (Games) - 8GB RTX 3070 XC3 Ultra - Sound Blaster Audigy 5 RX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
|
barnhartmd051977
FTW Member
- Total Posts : 1476
- Reward points : 0
- Joined: 2009/02/07 07:53:11
- Location: Sunapee, NH
- Status: offline
- Ribbons : 4
Re:Multi GPU guide with WinFC
2009/11/13 16:58:25
(permalink)
By what I have read in his other two threads the only thunder that is going on is in his house and it cause he is beating the mobo and gpu's with a aluminum baseball bat...
|
Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/13 17:49:15
(permalink)
Jump in anytime _Nite_ I do not have the market cornered on any of this stuff. There are always going to problems that come up that will take all of us to figure out.
|
_Nite_
Insert Custom Title Here
- Total Posts : 19175
- Reward points : 0
- Joined: 2007/04/18 15:35:04
- Location: Sumner, Washington
- Status: offline
- Ribbons : 46
Re:Multi GPU guide with WinFC
2009/11/13 18:02:31
(permalink)
Horvat Jump in anytime _Nite_ I do not have the market cornered on any of this stuff. There are always going to problems that come up that will take all of us to figure out. hehe I know I was just jokeing around
Gaming Rig: AMD Ryzen 7 2700x @ 4.25Ghz - Asrock B450 Pro 4 - 16GB Crucial Ballistix DDR4 3000 - 240GB SSD (OS), 1TB ADATA SU800 SSD and 2TB ADATA SX8200 Pro M2 NVME (Games) - 8GB RTX 3070 XC3 Ultra - Sound Blaster Audigy 5 RX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
|
Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/13 18:42:14
(permalink)
Man I am in a vulnarable state right now. My Rig 1 has crashed after I put all that work into it. I am devastated.
|
69vettester
iCX Member
- Total Posts : 356
- Reward points : 0
- Joined: 2009/08/12 11:01:42
- Status: offline
- Ribbons : 1
Re:Multi GPU guide with WinFC
2009/11/13 18:51:59
(permalink)
Horvat Man I am in a vulnarable state right now. My Rig 1 has crashed after I put all that work into it. I am devastated. Chin up Bucko , As the Saying goes, "shot down in April , Back up in May!
Lian-Li P80, Evga X58 classified E760, i7 975 extreme, Coolermaster V8, 3 2Gig corsair dominator dimms, Corsair HX1000w modular PSU, 2 EVGA 8800gts 512 card SLI 2 Sata raptors in Raid 0 Yea Though I walk Through the Valley Of Death I Reserve My God given Right to Scream, Im Gettin the Hell Outta Here, at any time!!
|
_Nite_
Insert Custom Title Here
- Total Posts : 19175
- Reward points : 0
- Joined: 2007/04/18 15:35:04
- Location: Sumner, Washington
- Status: offline
- Ribbons : 46
Re:Multi GPU guide with WinFC
2009/11/13 21:23:42
(permalink)
Horvat Man I am in a vulnarable state right now. My Rig 1 has crashed after I put all that work into it. I am devastated. maybe tanks bulldog attacked it.
Gaming Rig: AMD Ryzen 7 2700x @ 4.25Ghz - Asrock B450 Pro 4 - 16GB Crucial Ballistix DDR4 3000 - 240GB SSD (OS), 1TB ADATA SU800 SSD and 2TB ADATA SX8200 Pro M2 NVME (Games) - 8GB RTX 3070 XC3 Ultra - Sound Blaster Audigy 5 RX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
|
GhostImage
iCX Member
- Total Posts : 358
- Reward points : 0
- Joined: 2008/09/21 11:49:30
- Status: offline
- Ribbons : 2
Re:Multi GPU guide with WinFC
2009/11/18 14:33:58
(permalink)
Guys Im back, :( So after 4 days of straight run My second GPU gave up. Unstable machine code again. So Ive tried other 250 that I got same thing, Im running out of option Ive downloaded new Fcore 11 prior to that and it worked fine (for a while) and all Checked GPU RAM again. Performance mode Is enabled (not riva, but config file method) I tied downclocking it a bit nada. Im thinking that the Drivers. Am i right or I can try something else? Thank you.
|
Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/18 14:59:03
(permalink)
Is it now trying to run the fahcore_14? Open your log for that client and check the version that is downloaded. If it is core version 1.25 taht is the problem. to correct it, open your folding folder and delete the file that says fahcore_14. when restarted the client will download the new core 1.26 version of fahcore_14 and all should be right with the world again. If this does not correct the problem let me know.
|
GhostImage
iCX Member
- Total Posts : 358
- Reward points : 0
- Joined: 2008/09/21 11:49:30
- Status: offline
- Ribbons : 2
Re:Multi GPU guide with WinFC
2009/11/18 15:01:46
(permalink)
Thank you. Im all over it. :) Hope itll do it.
|
GhostImage
iCX Member
- Total Posts : 358
- Reward points : 0
- Joined: 2008/09/21 11:49:30
- Status: offline
- Ribbons : 2
Re:Multi GPU guide with WinFC
2009/11/18 15:15:01
(permalink)
Ive looked in Google and around Standford site But cant find download Link. Can you help me. I apologize for the hustle.
|
Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/18 15:17:36
(permalink)
You do not need to download the new core, it will do it itself automatically. Just delete the fahcore_14 file and restart the client.
|
GhostImage
iCX Member
- Total Posts : 358
- Reward points : 0
- Joined: 2008/09/21 11:49:30
- Status: offline
- Ribbons : 2
Re:Multi GPU guide with WinFC
2009/11/18 15:23:04
(permalink)
|
barnhartmd051977
FTW Member
- Total Posts : 1476
- Reward points : 0
- Joined: 2009/02/07 07:53:11
- Location: Sunapee, NH
- Status: offline
- Ribbons : 4
Re:Multi GPU guide with WinFC
2009/11/20 12:00:10
(permalink)
Oh boy Sli folding here we go!!! This should only take me a month to figure out
|
Tasmac
FTW Member
- Total Posts : 1218
- Reward points : 0
- Joined: 2009/03/19 20:33:38
- Location: Anderson, South Carolina
- Status: offline
- Ribbons : 4
Re:Multi GPU guide with WinFC
2009/11/20 12:09:12
(permalink)
unfortunately if you have more than 2 gpu's no sli folding no sli folding for me
|
barnhartmd051977
FTW Member
- Total Posts : 1476
- Reward points : 0
- Joined: 2009/02/07 07:53:11
- Location: Sunapee, NH
- Status: offline
- Ribbons : 4
Re:Multi GPU guide with WinFC
2009/11/20 12:12:39
(permalink)
what!!!!!!!!!! You cant TRI SLI FOLD??????????????????????/
|
Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/20 12:47:40
(permalink)
Easy wheezy. Just get things running first and then we will jump off the cliff together with Tri SLI.
|
barnhartmd051977
FTW Member
- Total Posts : 1476
- Reward points : 0
- Joined: 2009/02/07 07:53:11
- Location: Sunapee, NH
- Status: offline
- Ribbons : 4
Re:Multi GPU guide with WinFC
2009/11/20 13:04:40
(permalink)
I Running TRI SLI!!!!!!!!!!! It works like a champ!!!!!!!!!!
|
Horvat
CLASSIFIED Member
- Total Posts : 3837
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:Multi GPU guide with WinFC
2009/11/20 13:15:06
(permalink)
Wooooooooooooooooooooooo Hooooooooooooooooooooooooooooo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! No more can I teach you, you now have all that you need to be folding jedi master. MhhMhhMhhMhh.
|
jasonanderson
SSC Member
- Total Posts : 584
- Reward points : 0
- Joined: 2009/01/14 10:03:52
- Location: Silver Spring, MD
- Status: offline
- Ribbons : 0
Re:Multi GPU guide with WinFC
2009/11/20 13:40:36
(permalink)
barnhartmd051977 I Running TRI SLI!!!!!!!!!!! It works like a champ!!!!!!!!!! That is great news! You got up and working much more quickly than I did. I am curious, how many PPDs do you get for each 260? I am curious how 3 260s compares to my 2 280s for folding. I am getting about 8000 - 8500 on each 280. My 280s are running at the factory SSC settings. I never tried to OC them due to air flow, but with my new case, I may try it after applying new TIM to them.
CPU: i7 5930K, 4.5 (125x36) with Corsair H100i | MB: Asus Rampage V Extreme (1401 Bios) | GPU: 2x EVGA GTX 980 SC ACX 2.0 | RAM: Corsair Vengeance 32 GB DDR4 2666MHz (4x8GB) | Storage: Crucial MX100 512 GB SSD (OS & Apps), 2 Seagate 1TB Serial ATA HD 7200/32MB/SATA-3G (Data - RAID 1) | PSU: Corsair HX1000W | Chassis: Cooler Master HAF X | OS: Win 8.1 Pro x64
|
wb488641
CLASSIFIED Member
- Total Posts : 4205
- Reward points : 0
- Joined: 2009/07/13 13:55:02
- Status: offline
- Ribbons : 18
Re:Multi GPU guide with WinFC
2009/11/20 13:59:33
(permalink)
jasonanderson barnhartmd051977 I Running TRI SLI!!!!!!!!!!! It works like a champ!!!!!!!!!! That is great news! You got up and working much more quickly than I did. I am curious, how many PPDs do you get for each 260? I am curious how 3 260s compares to my 2 280s for folding. I am getting about 8000 - 8500 on each 280. My 280s are running at the factory SSC settings. I never tried to OC them due to air flow, but with my new case, I may try it after applying new TIM to them. i am getting on my 260 353 wu = 8700-9300ppd 1888 wu= 7200-7700 - crap wu 787wu = 8000-8900ppd 476 wu = 7800-8200ppd 260 settings 576-1550-1008 - 100%fan
SR-2 & 2 x5680 E761 & i7 920d0 EVGA Affiliate Code: A2LD8L9Q7P HEATWARE
|
jasonanderson
SSC Member
- Total Posts : 584
- Reward points : 0
- Joined: 2009/01/14 10:03:52
- Location: Silver Spring, MD
- Status: offline
- Ribbons : 0
Re:Multi GPU guide with WinFC
2009/11/20 14:16:14
(permalink)
wb488641 jasonanderson barnhartmd051977 I Running TRI SLI!!!!!!!!!!! It works like a champ!!!!!!!!!! That is great news! You got up and working much more quickly than I did. I am curious, how many PPDs do you get for each 260? I am curious how 3 260s compares to my 2 280s for folding. I am getting about 8000 - 8500 on each 280. My 280s are running at the factory SSC settings. I never tried to OC them due to air flow, but with my new case, I may try it after applying new TIM to them. i am getting on my 260 353 wu = 8700-9300ppd 1888 wu= 7200-7700 - crap wu 787wu = 8000-8900ppd 476 wu = 7800-8200ppd 260 settings 576-1550-1008 - 100%fan Those are very similar to my PPD's. Does it have to do with the fact that my shader clock is 1404 and yours 1550? My 280s are at 648-1404-1161 with 100% fan.
CPU: i7 5930K, 4.5 (125x36) with Corsair H100i | MB: Asus Rampage V Extreme (1401 Bios) | GPU: 2x EVGA GTX 980 SC ACX 2.0 | RAM: Corsair Vengeance 32 GB DDR4 2666MHz (4x8GB) | Storage: Crucial MX100 512 GB SSD (OS & Apps), 2 Seagate 1TB Serial ATA HD 7200/32MB/SATA-3G (Data - RAID 1) | PSU: Corsair HX1000W | Chassis: Cooler Master HAF X | OS: Win 8.1 Pro x64
|
wb488641
CLASSIFIED Member
- Total Posts : 4205
- Reward points : 0
- Joined: 2009/07/13 13:55:02
- Status: offline
- Ribbons : 18
Re:Multi GPU guide with WinFC
2009/11/20 14:24:06
(permalink)
yes, the shader make a different in term of ppd from your gfx. i would lower your core and memory clock as they do not do anything to ppd , and it would lower your temp on the gfx, and just upped the shader clock for folding. WB
SR-2 & 2 x5680 E761 & i7 920d0 EVGA Affiliate Code: A2LD8L9Q7P HEATWARE
|
jasonanderson
SSC Member
- Total Posts : 584
- Reward points : 0
- Joined: 2009/01/14 10:03:52
- Location: Silver Spring, MD
- Status: offline
- Ribbons : 0
Re:Multi GPU guide with WinFC
2009/11/20 14:27:01
(permalink)
wb488641 yes, the shader make a different in term of ppd from your gfx. i would lower your core and memory clock as they do not do anything to ppd , and it would lower your temp on the gfx, and just upped the shader clock for folding. WB Great. Thanks, I will work on that.
CPU: i7 5930K, 4.5 (125x36) with Corsair H100i | MB: Asus Rampage V Extreme (1401 Bios) | GPU: 2x EVGA GTX 980 SC ACX 2.0 | RAM: Corsair Vengeance 32 GB DDR4 2666MHz (4x8GB) | Storage: Crucial MX100 512 GB SSD (OS & Apps), 2 Seagate 1TB Serial ATA HD 7200/32MB/SATA-3G (Data - RAID 1) | PSU: Corsair HX1000W | Chassis: Cooler Master HAF X | OS: Win 8.1 Pro x64
|