Re: KPE xoc bios - stock cooler - OC bios switch
2019/05/19 13:00:05
(permalink)
oscyjack
After watching Steve's ln2 stream and Jay's recent demo, I'm happy where im at on ambient :).
To maximize, what fans do y'all think are unequivocally the best for the rad in push pull? I'm using Corsair MLs now
If your using the corsair ML120s in there now stick with them. And double them up for push/pull if your not.
Those have pretty high static pressure at 4.2 mm H2O. Pull fans might be loud so use a thick fan shroud to quiet them over 1/4" thick. 1/2" thixk would be good.
The ln2 bios flashed to the OC switch position is what I'm using which allows one to ran the fans at max. So I have the card fan at 100% which now you can hear it over the normal max of 84% and the same for the rad fans.. but I've always just had all 4 of my corsair sp120 hp fans plugged into the mb and them all set to max.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4
EVGA 2080ti K|NGP|N w/ Hydro Copper block.
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.