JDauwalter
Superclocked Member
- Total Posts : 181
- Reward points : 0
- Joined: 2005/03/12 02:26:47
- Status: offline
- Ribbons : 0
Re: Here Comes the RTX Hybrid Kits
2019/07/08 09:18:12
(permalink)
bcavnaugh
JDauwalter
When I got mine, it didn't have the bracket with it. The 3 slot bracket does work if you need, but I talked to EVGA and they said that the 2 slot bracket was supposed to come with the kit, so they sent one over to me for free.
Then you lucked out as I did pay for both of mine.
It would be nice to know who at EVGA told you this for others to know who to contact for a free 2 Slot Bracket.
I have never seen the 2 Slot Bracket List on any of the Hybrid Kits or even the Hydro Copper Water Blocks
This is the email I got: My name is Daniel McNamara and I will answer your question today.
Your Answer:Hello, Thanks for registering the unit. Yes, we have identified a small batch of units that did not have the bracket in the box. I have created an ESC response for management to get that bracket out to you. We apologize for any inconvenience this may have caused. Once we ship one out we will provide tracking. Regards EVGA
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/08 09:22:54
(permalink)
JDauwalter
bcavnaugh
JDauwalter
When I got mine, it didn't have the bracket with it. The 3 slot bracket does work if you need, but I talked to EVGA and they said that the 2 slot bracket was supposed to come with the kit, so they sent one over to me for free.
Then you lucked out as I did pay for both of mine.
It would be nice to know who at EVGA told you this for others to know who to contact for a free 2 Slot Bracket.
I have never seen the 2 Slot Bracket List on any of the Hybrid Kits or even the Hydro Copper Water Blocks
This is the email I got:
My name is Daniel McNamara and I will answer your question today.
Your Answer:Hello,
Thanks for registering the unit. Yes, we have identified a small batch of units that did not have the bracket in the box. I have created an ESC response for management to get that bracket out to you. We apologize for any inconvenience this may have caused. Once we ship one out we will provide tracking.
Regards
EVGA
Like I said you only lucked out this time. But everyone make a mistake once in a while as well as Accessories are subject to change. *Accessories shown in the images above are subject to change without notice. Even the Manuals do not show the 2 Slot Bracket. Specs https://www.evga.com/products/pdf/400-HY-1484-B1.pdfhttps://www.evga.com/products/pdf/400-HY-1184-B1.pdf
post edited by bcavnaugh - 2019/07/08 20:08:13
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/08 20:09:20
(permalink)
More to Follow 
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 09:34:11
(permalink)
Hey guys, does anyone know the teeny-tiny connector type used to go from the hybrid kit's onboard VRM fan to the small harness that plugs into the board? I would think that if you could tap off of that you would get a PWM fan speed signal that is controlled via software. The connector is considerably smaller than they typical GPU fan/pump header connector.
post edited by kevinc313 - 2019/07/10 09:51:43
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:10:23
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:14:37
(permalink)
kevinc313
Hey guys, does anyone know the teeny-tiny connector type used to go from the hybrid kit's onboard VRM fan to the small harness that plugs into the board? I would think that if you could tap off of that you would get a PWM fan speed signal that is controlled via software. The connector is considerably smaller than they typical GPU fan/pump header connector.
kevinc313
Looking for the connector type in the pic attached, the smaller one. The larger one is a GPU header connector that goes to the pump.
That most likely would Void the warranty on the Hybrid Kit. Cutting into the Wires that is. Remember that the cable also controls the Pump Power. All this will do for you is allow you to connect a Fan to your GPU  You need this, this well allow you to connect the Fan to the Motherboard Fan Header or what other Controller.  Ktech 4 Pin Mini GPU to 4 Pin Fan Adapter
post edited by bcavnaugh - 2019/07/10 10:21:44
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:18:13
(permalink)
bcavnaugh
That most likely would Void the warranty on the Hybrid Kit. Cutting into the Wires that is.
Remember that the cable also controls the Pump Power.
Not going to cut. Need a small extender cable to go in there in order to tap the PWM signal, to run the rad fan off of with software control, ganged with the VRM fan. The unconnected header connector in the pic goes to the pump and sends it fixed 12V, and sends the radiator fan a PWM signal, controlled in X1. I'm planning to run the pump off a MB fan header, already have that cable, but that loses rad fan control. Would like a way to control the rad fan that's better than another MB header. Is it just a common mini gpu fan connector?
post edited by kevinc313 - 2019/07/10 10:23:27
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:22:50
(permalink)
kevinc313
bcavnaugh
That most likely would Void the warranty on the Hybrid Kit. Cutting into the Wires that is.
Not going to cut. Need a small extender cable to go in there in order to tap the PWM signal, to run the rad fan off.
Is it just a common mini gpu fan connector?
You might better to create your own Thread to work the modification you are thinking about.
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:26:42
(permalink)
bcavnaugh
You might better to create your own Thread to work the modification you are thinking about.
Thanks. Its so that I can gang the VRM and radiator fans together on one PWM signal, controlled by the fan speed setting in afterburner, and move the power source off the card.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:28:30
(permalink)
kevinc313
bcavnaugh
You might better to create your own Thread to work the modification you are thinking about.
Thanks. Its so that I can gang the VRM and radiator fans together on one PWM signal, controlled by the fan speed setting in afterburner, and move the power source off the card.
From the Power Coming form the Graphics Card you are going to run all the fans? What are you going to do with the Radiator Fan Header (DC Only) that comes on the Hybrid Kit?
post edited by bcavnaugh - 2019/07/10 10:33:52
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:34:32
(permalink)
From the Power Coming form the Graphics Card you are going to run all the fans?
No, from what I understand it's possible to take the PWM signal for speed control, and deliver 12V from anywhere else in the PC - molex, header, etc.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:43:08
(permalink)
kevinc313
From the Power Coming form the Graphics Card you are going to run all the fans?
No, from what I understand it's possible to take the PWM signal for speed control, and deliver 12V from anywhere else in the PC - molex, header, etc.
Ktech 4 Pin Mini GPU to 4 Pin Fan Adapter For the VRM Fan then to convert the VRM Fan Connector to a standard Fan Connector.
post edited by bcavnaugh - 2019/07/10 10:45:20
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:53:23
(permalink)
bcavnaugh
Ktech 4 Pin Mini GPU to 4 Pin Fan Adapter
For the VRM Fan then to convert the VRM Fan Connector to a standard Fan Connector.
I've already got one of those cables on hand, to connect the pump to the MB and run it under voltage control. If I got a cable the opposite of that, I could connect the radiator fan directly to the board harness and control the rad fan in X1 (I think). But the connector I'm looking for is the tiny one for the VRM fan, smaller than the typical GPU fan/pump header connector.
post edited by kevinc313 - 2019/07/10 14:53:54
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 10:59:08
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 11:03:31
(permalink)
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 11:09:43
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 11:17:08
(permalink)
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 12:48:35
(permalink)
bcavnaugh
Best of luck with this Project
Thanks, I'll need it. Going to start by installing the hybrid kit in stock configuration and see how it does with noise. Already have the cable in hand to do the pump to MB fan header mod, but only a normal fan extension cable that will let me plug the rad fan into the MB. Thus I'm wondering if I should go to the trouble to gang the fans, or just use another gpu to fan cable and X1.
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 14:59:23
(permalink)
It all kind of a moot point because I wasn't able to separate the micro 4 pin shown above, it appears to lock together and I'm not going to risk prying it apart. Looks like I'm going to have to get the appropriate female gpu to male fan cable to plug the harness directly into the rad fan and run X1. Pump will be run off a MB fan header set to voltage and I already have the cable for that.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 16:10:12
(permalink)
kevinc313
It all kind of a moot point because I wasn't able to separate the micro 4 pin shown above, it appears to lock together and I'm not going to risk prying it apart. Looks like I'm going to have to get the appropriate female gpu to male fan cable to plug the harness directly into the rad fan and run X1. Pump will be run off a MB fan header set to voltage and I already have the cable for that.
Bummer. 
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 17:06:23
(permalink)
bcavnaugh
kevinc313
It all kind of a moot point because I wasn't able to separate the micro 4 pin shown above, it appears to lock together and I'm not going to risk prying it apart. Looks like I'm going to have to get the appropriate female gpu to male fan cable to plug the harness directly into the rad fan and run X1. Pump will be run off a MB fan header set to voltage and I already have the cable for that.
Bummer.
Eh it should be fine and simpler, thanks for your help! Ordered the gpu header to fan cable, a pair of Y fan cable splitters (possibly will do dual fans on both the hybrid rad and cpu AIO) and a tube of MX-4. Should be able to rig it all up this weekend.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 17:18:57
(permalink)
kevinc313
bcavnaugh
kevinc313
It all kind of a moot point because I wasn't able to separate the micro 4 pin shown above, it appears to lock together and I'm not going to risk prying it apart. Looks like I'm going to have to get the appropriate female gpu to male fan cable to plug the harness directly into the rad fan and run X1. Pump will be run off a MB fan header set to voltage and I already have the cable for that.
Bummer.
Eh it should be fine and simpler, thanks for your help!
Ordered the gpu header to fan cable, a pair of Y fan cable splitters (possibly will do dual fans on both the hybrid rad and cpu AIO) and a tube of MX-4. Should be able to rig it all up this weekend.
MX-4 TF8 is a better TIM then MX-4. I changed a little over a year ago from MX-4. Both are good for up to 8 Years. I have use that cable on my card running Linux Ubuntu with a Hybrid Cooler. Cost is High but I am going to be testing out TFX.
post edited by bcavnaugh - 2019/07/10 17:25:26
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 18:07:48
(permalink)
bcavnaugh
kevinc313
bcavnaugh
kevinc313
It all kind of a moot point because I wasn't able to separate the micro 4 pin shown above, it appears to lock together and I'm not going to risk prying it apart. Looks like I'm going to have to get the appropriate female gpu to male fan cable to plug the harness directly into the rad fan and run X1. Pump will be run off a MB fan header set to voltage and I already have the cable for that.
Bummer.
Eh it should be fine and simpler, thanks for your help!
Ordered the gpu header to fan cable, a pair of Y fan cable splitters (possibly will do dual fans on both the hybrid rad and cpu AIO) and a tube of MX-4. Should be able to rig it all up this weekend.
MX-4 TF8 is a better TIM then MX-4. I changed a little over a year ago from MX-4. Both are good for up to 8 Years.
I have use that cable on my card running Linux Ubuntu with a Hybrid Cooler.
Cost is High but I am going to be testing out TFX.
I looked at TF8 and Kryonaut, decided MX-4 was the most proven, widely used and easiest to get genuine product.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 20:22:01
(permalink)
MX-4 is great and so is Kryonaut but I didn't see a drastic change to make it worth double the price. TF8 is ridiculously expensive and not worth it imo unless of course for extreme OCing.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/10 20:35:26
(permalink)
kevinc313
bcavnaugh
kevinc313
bcavnaugh
kevinc313
It all kind of a moot point because I wasn't able to separate the micro 4 pin shown above, it appears to lock together and I'm not going to risk prying it apart. Looks like I'm going to have to get the appropriate female gpu to male fan cable to plug the harness directly into the rad fan and run X1. Pump will be run off a MB fan header set to voltage and I already have the cable for that.
Bummer.
Eh it should be fine and simpler, thanks for your help!
Ordered the gpu header to fan cable, a pair of Y fan cable splitters (possibly will do dual fans on both the hybrid rad and cpu AIO) and a tube of MX-4. Should be able to rig it all up this weekend.
MX-4 TF8 is a better TIM then MX-4. I changed a little over a year ago from MX-4. Both are good for up to 8 Years.
I have use that cable on my card running Linux Ubuntu with a Hybrid Cooler.
Cost is High but I am going to be testing out TFX.
I looked at TF8 and Kryonaut, decided MX-4 was the most proven, widely used and easiest to get genuine product.
Reading through your trials and tribulations here... What I did was use a couple of quality (with a PWM splitter) fans, in my case Scythe AP-13's in push/pull. I think one time I left it on a game menu running at 2000fps for a hour or so by accident...I think it topped out at 51C and this is overclocked to 2050mhz. No muss, no fuss. At 90% they run ~1000 rpm and are inaudible. The only thing I would suggest is not speed controlling the pump. They are designed to run at a constant speed. Strange things happen if you accidentally run a pump at its impeller hydraulic resonance frequency. You can cut it's service life in half or more.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/11 06:01:56
(permalink)
HeavyHemi
Reading through your trials and tribulations here... What I did was use a couple of quality (with a PWM splitter) fans, in my case Scythe AP-13's in push/pull. I think one time I left it on a game menu running at 2000fps for a hour or so by accident...I think it topped out at 51C and this is overclocked to 2050mhz. No muss, no fuss. At 90% they run ~1000 rpm and are inaudible. The only thing I would suggest is not speed controlling the pump. They are designed to run at a constant speed. Strange things happen if you accidentally run a pump at its impeller hydraulic resonance frequency. You can cut it's service life in half or more.
Thanks, I'm hoping not to have to deal with the pump noise/wiring, but my case configuration is not optimal and I like to be prepared.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/11 09:08:01
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX & RTX SUPER™ Hybrid Kits (Compatibility list)
2019/07/29 18:24:06
(permalink)
|
PietroBRA
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2018/09/17 04:39:54
- Status: offline
- Ribbons : 0
Re: Here Comes the RTX Hybrid Kits
2019/08/09 13:38:21
(permalink)
AHowes
Hopefully it wont have the problem the ftw3 1080ti kits had.
Sorry to kinda of necro this thread. Any information about this same issue on the 1080ti FTW3 happening on RTX series? Because of that goddamn problem with the hybrid kit on the previous generation, I'm going through the RMA process of sending my 1080Ti FTW3 to receive a 2080 XC Black Edition (it sucks a lot to receive a card that doesn't have all the features the FTW3 had). In any case, if I do receive a RTX 2080 as replacement, I want to put a Hybrid Kit on it (unless there is any kind of problem as the same generation had).
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Here Comes the RTX Hybrid Kits
2019/08/09 15:08:19
(permalink)
Welcome to the Forum *Goddamn This Thread is more about the RTX Hybrid Kits so you might want to create your own Thread for your GTX Hybrid Issue. You also might get back your Card with a New Hybrid Cooler and even get a RTX 2080 Hybrid Graphics Card. The Tread is only 2 Weeks old since the last Post and is still active so you are not necro it.
post edited by bcavnaugh - 2019/08/09 15:18:13
|