rfk-13dr
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2009/01/15 04:05:57
- Status: offline
- Ribbons : 0
Was planning on vertically mounting an EVGA 3090 ti FTW Ultra hybrid using a Link-Up Extreme4+ PCIe 4.0 x16 Riser Cable in a Enthoo 719 case. Has anyone done this already? Are there issues I should worry about? Thank you in advance for any constructive feedback.
Cooler Master HAF-X case PC Power and Cooling MK III 1200w power supply Asus P9X79-E WS Motherboard 32 GB (4 x 8) Gskill RipJaw F3-19200CL 10Q-32GBZHD 4930K processor @4.3ghz (overclocked to max of 4.6 at one time) Corsair H110 CPU cooling system. Pascal Titan X Wasabi Mango Perfect Pixel UHD490 monitor Hannspree HF289H monitor Lots of hard drives including PCIe ROG RAIDR Windows 10 OS
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31001
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/10 08:54:53
(permalink)
if there is room for air to reach the internal fan/ not mashed up against the side panel it should work if that case lists that length of GPU as fits.
|
rfk-13dr
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2009/01/15 04:05:57
- Status: offline
- Ribbons : 0
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/10 21:27:58
(permalink)
The Phanteks Enthoo 719 case is immense. After doing some more looking found that Phanteks has an updated PCIE Gen 4 vertical GPU bracket and cable combo (PH-VGPUKT4.0_03) to replace the Gen 3 assembly (PH-VGPIKT_02) listed in the Enthoo 719 case manual. It is also 1/2 the price of the Link-Up Extreme4+ PCIe 4.0 x16. This should allow some breathing room versus mounting card in the bottom of the case. Still waiting on parts to arrive, based on listed numbers it should fit...
post edited by rfk-13dr - 2022/06/10 21:29:59
Cooler Master HAF-X case PC Power and Cooling MK III 1200w power supply Asus P9X79-E WS Motherboard 32 GB (4 x 8) Gskill RipJaw F3-19200CL 10Q-32GBZHD 4930K processor @4.3ghz (overclocked to max of 4.6 at one time) Corsair H110 CPU cooling system. Pascal Titan X Wasabi Mango Perfect Pixel UHD490 monitor Hannspree HF289H monitor Lots of hard drives including PCIe ROG RAIDR Windows 10 OS
|
Nereus
Captain Goodvibes
- Total Posts : 18926
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/10 21:47:30
(permalink)
I'm a little surprised EVGA doesn't offer riser cables in their store.
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/10 22:07:38
(permalink)
Nereus I'm a little surprised EVGA doesn't offer riser cables in their store.
Probably can't make a profit on them. Most of them you see online run around $60.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
rfk-13dr
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2009/01/15 04:05:57
- Status: offline
- Ribbons : 0
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/11 11:52:27
(permalink)
Does anyone know the hose length on the 3090 ti hybrid, is it 400mm like the other Hybrid coolers?
post edited by rfk-13dr - 2022/06/11 11:54:59
Cooler Master HAF-X case PC Power and Cooling MK III 1200w power supply Asus P9X79-E WS Motherboard 32 GB (4 x 8) Gskill RipJaw F3-19200CL 10Q-32GBZHD 4930K processor @4.3ghz (overclocked to max of 4.6 at one time) Corsair H110 CPU cooling system. Pascal Titan X Wasabi Mango Perfect Pixel UHD490 monitor Hannspree HF289H monitor Lots of hard drives including PCIe ROG RAIDR Windows 10 OS
|
lastsamurairick
CLASSIFIED Member
- Total Posts : 2419
- Reward points : 0
- Joined: 2008/11/11 17:19:53
- Location: Orlando,FL
- Status: offline
- Ribbons : 6
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/11 14:55:44
(permalink)
Mine won't fit well in my case that way. Even if my case is massive big card will hit front glass.
Intel 10900k @ 3.7 Stock EVGA Z490 Dark EVGA GEFORCE RTX 3070Ti FTW3 G SKILL TRIDENT Z ROYAL 32GB EVGA 1000G5
|
kraade
CLASSIFIED Member
- Total Posts : 2369
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: online
- Ribbons : 7
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/11 15:12:21
(permalink)
I looked and the Specs are Identical to the KPE Hybrid size wise. I used a Cooler master vertical mount with this card just fine, It came with a 3.0 riser cable, upgrading it to a 4.0 riser cable does not make the card any faster fyi.
|
rfk-13dr
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2009/01/15 04:05:57
- Status: offline
- Ribbons : 0
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/18 01:52:43
(permalink)
So.. all parts came in... Things did not turn out as expected, as imagined anyway. There was a youtuber doing a review on the Phanteks 719 case and he that indicated that it was made for custom loops and not really for AIO solutions, but that that would be an interesting build video.. Well I did not make a video putting this together but there would have been a lot of editing if I had. The Strix LC II 360 cooler for CPU is taking up the top mounting section of the case and the 3090ti hybrid technically fits in the "mid" vertical mount position using the Phanteks riser solution. I have some reservations about the 3090ti hybrid radiator height/position. EVGA supplies a nice little insert with their 3090ti hybrid cooling solution indicating that the radiator should be above the item being cooled with the hose connections down.. I understand it is undesirable to have cavitation due to air in the pump, so my question is how much fluid is actually in the system/radiator? If the radiator cannot be entirely above card (mine is currently mounted vertically not horizontal) can the fluid level be high enough (above pump) in radiator to prevent any issues. I ran the new system for a day or so without the Hybrid card installed while I milled over how this build was not working out as I had planned. The system has ran for another couple of days now with 3090ti hybrid card installed doing benchmarks etc. with no issues and very impressive temps (<60ºF) despite my overclocking attempts on video card, the upper vertical mount keeps card away from side panel enough for air flow. The layout is not as I had hoped but it looks like it will do. Once again, constructive comments are welcome.
post edited by rfk-13dr - 2022/06/18 14:02:36
Cooler Master HAF-X case PC Power and Cooling MK III 1200w power supply Asus P9X79-E WS Motherboard 32 GB (4 x 8) Gskill RipJaw F3-19200CL 10Q-32GBZHD 4930K processor @4.3ghz (overclocked to max of 4.6 at one time) Corsair H110 CPU cooling system. Pascal Titan X Wasabi Mango Perfect Pixel UHD490 monitor Hannspree HF289H monitor Lots of hard drives including PCIe ROG RAIDR Windows 10 OS
|
kraade
CLASSIFIED Member
- Total Posts : 2369
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: online
- Ribbons : 7
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/18 07:59:38
(permalink)
To me, I think the pumps on on the Video card AIOs are weaker than the CPU AIOs so I prefer to the Vid card Radiator on the roof and the CPU Rad on the vertical side but if you got it running and no bubble sounds you should be fine
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/18 10:16:00
(permalink)
rfk-13dr So.. all parts came in... Things did not turn out as expected, as imagined anyway. There was a youtuber doing a review on the Phanteks 719 case and he that indicated that it was made for custom loops and not really for AIO solutions, but that that would be an interesting build video.. Well I did not make a video putting this together but there would have been a lot of editing if I had. The Strix LC II 360 cooler for CPU is taking up the top mounting section of the case and the 3090ti hybrid technically fits in the "mid" vertical mount position using the Phanteks riser solution. I some reservations about the 3090ti hybrid radiator height/position. EVGA supplies a nice little insert with their 3090ti hybrid cooling solution indicating that the radiator should be above the item being cooled with the hose connections down.. I understand it is undesirable to have cavitation due to air in the pump, so my question is how much fluid is actually in the system/radiator? If the radiator cannot be entirely above card (mine is currently mounted vertically not horizontal) can the fluid level be high enough (above pump) in radiator to prevent any issues. I ran the new system for a day or so without the Hybrid card installed while I milled over how this build was not working out as I had planned. The system has ran for another couple of days now with 3090ti hybrid card installed doing benchmarks etc. with no issues and very impressive temps (<60ºF) despite my overclocking attempts on video card, the upper vertical mount keeps card away from side panel enough for air flow. The layout is not as I had hoped but it looks like it will do. Once again, constructive comments are welcome.
With my KPE hybrid it did feel and sound like there was a little air in the loop. More than I'd like. I had mine mounted tubes down on the side o11d xl mount. And with the bad luck I've had with my brother and another friends hybrid card pumps going out on the 3080 and 3080 ti hybrids I wouldn't take any chances.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
Hoggle
EVGA Forum Moderator
- Total Posts : 10102
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/18 11:02:39
(permalink)
Keep in mind even in an AIO solution the liquid will have some degree of evaporation over time. If the product is properly mounted the extra air will not matter that much as it would several years to really make a difference. If it's not mounted correctly then you risk the chance that even if air is not caught near the pump now it could change over time.
|
rfk-13dr
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2009/01/15 04:05:57
- Status: offline
- Ribbons : 0
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/18 13:56:03
(permalink)
Cooler Master HAF-X case PC Power and Cooling MK III 1200w power supply Asus P9X79-E WS Motherboard 32 GB (4 x 8) Gskill RipJaw F3-19200CL 10Q-32GBZHD 4930K processor @4.3ghz (overclocked to max of 4.6 at one time) Corsair H110 CPU cooling system. Pascal Titan X Wasabi Mango Perfect Pixel UHD490 monitor Hannspree HF289H monitor Lots of hard drives including PCIe ROG RAIDR Windows 10 OS
|
rfk-13dr
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2009/01/15 04:05:57
- Status: offline
- Ribbons : 0
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/18 13:56:28
(permalink)
So this is how it is currently set-up..
post edited by rfk-13dr - 2022/06/18 14:01:53
Cooler Master HAF-X case PC Power and Cooling MK III 1200w power supply Asus P9X79-E WS Motherboard 32 GB (4 x 8) Gskill RipJaw F3-19200CL 10Q-32GBZHD 4930K processor @4.3ghz (overclocked to max of 4.6 at one time) Corsair H110 CPU cooling system. Pascal Titan X Wasabi Mango Perfect Pixel UHD490 monitor Hannspree HF289H monitor Lots of hard drives including PCIe ROG RAIDR Windows 10 OS
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/18 14:18:08
(permalink)
rfk-13dr So this is how it is currently set-up..
Should be fine. Exactly how my KPE is set up.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
Hoggle
EVGA Forum Moderator
- Total Posts : 10102
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/19 01:50:28
(permalink)
Odds are good if you did ever get air in the pump you would hear it before it got to a level that would be bad. I would still monitor the temps though so you know if anything is spiking higher than normal for summer weather which should be on the high side of normal.
post edited by Hoggle - 2022/06/19 01:52:19
|
Gotspeed_2000
SSC Member
- Total Posts : 818
- Reward points : 0
- Joined: 2021/01/07 18:53:17
- Status: offline
- Ribbons : 5
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/19 14:05:42
(permalink)
That's a lot of case for what you have in it. Your build I think will be fine as it is. The rads have capacity above the pumps so in theory any air that develops in the closed loops should end up in those gaps rather than the pumps. You have so much space that in your build you have all your fans on the rads exhausting which is fine imo based on what you have in your pc. I would consider adding fans to either the bottom or both the front and bottom to aide in air flow. It might not help much but atleast it would help pull air into the case through the filters rather than the back area near the I/O shield which does not have screens. You have a ton of unused space there in the front and bottom.
Corsair 1000D Obsidian Case I9 13900K with EK Velocity 2 Block ASUS 4090 Strix with Optimus Block ASUS Hero Z690 Mobo 64GB DDR5 RAM Trident 6000Mhz 1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive EVGA 1600 Watt PSU 30 Lian Li AL120 fans 2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with Two EK Pump/res combos. Custom hard tube loop. Samsung G7 32" Monitor EVGA Z20 Keyboard Glorious Model O
|
spartakrex
New Member
- Total Posts : 79
- Reward points : 0
- Joined: 2022/01/11 14:58:22
- Status: offline
- Ribbons : 0
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/20 14:30:45
(permalink)
I have a very similar case, Enthoo Pro II, the inside is identical. I have a 3090 Ti (EVGA FTW3 Ultra) mounted horizontally on the main motherboard slot and a hybrid 3090 Ti (Asus LC ROG Strix) mounted vertically in the bottom. I have filled every available fan mount with Noctuas. So far so good. Wish I could just attach a picture to show you. Could anyone let me know how to insert a photo?
post edited by spartakrex - 2022/06/20 14:50:02
|
spartakrex
New Member
- Total Posts : 79
- Reward points : 0
- Joined: 2022/01/11 14:58:22
- Status: offline
- Ribbons : 0
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/20 15:06:28
(permalink)
Testing with an image… Is inserting a link from imgur the way to do it?
post edited by spartakrex - 2022/06/20 15:08:44
|
psujorge
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2021/03/27 18:43:48
- Status: offline
- Ribbons : 0
Re: Has anyone vertically mounted a 3090ti hybrid?
2022/06/23 18:54:02
(permalink)
|