EVGA

Hadron Air Case

Author
Post
Essentials Only Full Version
lappy1987
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2015/01/31 23:29:52
  • Status: offline
  • Ribbons : 0
2017/06/09 06:57:37 (permalink)
Hi,

I am absolutely desperate to get my hands on one of the Hadron Air cases, seems odd they were discontinued because they seemed to be a big seller.

Are there any plans to begin manufacturing them again or is a new design in the works? I can't find another case that fits the specifications I'm after so perfectly, or anywhere to close them to be honest!

Thanks
post edited by lappy1987 - 2017/06/10 08:46:21
#1

8 Replies Related Threads
    tiberian32
    New Member
    • Total Posts : 39
    • Reward points : 0
    • Joined: 2009/05/02 00:19:33
    • Status: offline
    • Ribbons : 0
    Re: Hadron Air Case 2017/06/28 22:43:34 (permalink)
    dang , I was just about to post this. I missed this case when it was out. I see they are selling the hadron hydro now and was hoping they would start selling the air's again.
     
    #2
    PietroBR
    FTW Member
    • Total Posts : 1202
    • Reward points : 0
    • Joined: 2013/09/14 06:40:52
    • Location: Brazil
    • Status: offline
    • Ribbons : 7
    Re: Hadron Air Case 2017/06/29 04:54:05 (permalink)
    They could refresh the Hadron series to fit a FTW3.
    How I wish that :(.

    Case: Asus Z370-G Box / MB: Asus Z370-G / CPU: Intel I7 8700K / Mem.: 16GB (2x8) 3000Mhz Corsair Dominator Platinum DDR4 / GPU: GTX 1080TI FTW3 / A.I.O. W.C: EVGA CLC280 / PSU: EVGA SuperNOVA G3 750W

     
     
    #3
    AndyL
    EVGA Alumni
    • Total Posts : 30
    • Reward points : 0
    • Joined: 2017/06/27 09:34:52
    • Status: offline
    • Ribbons : 0
    Re: Hadron Air Case 2017/06/29 13:36:18 (permalink)
    lappy1987
    Hi,

    I am absolutely desperate to get my hands on one of the Hadron Air cases, seems odd they were discontinued because they seemed to be a big seller.

    Are there any plans to begin manufacturing them again or is a new design in the works? I can't find another case that fits the specifications I'm after so perfectly, or anywhere to close them to be honest!

    Thanks


    Not the Hadron Air but its close, a bit taller will fit a 120mm CLC.
    https://www.evga.com/prod...n=110-MW-1002-K1 
    #4
    PietroBR
    FTW Member
    • Total Posts : 1202
    • Reward points : 0
    • Joined: 2013/09/14 06:40:52
    • Location: Brazil
    • Status: offline
    • Ribbons : 7
    Re: Hadron Air Case 2017/06/29 15:49:50 (permalink)
    EVGA_AndyL
    lappy1987
    Hi,

    I am absolutely desperate to get my hands on one of the Hadron Air cases, seems odd they were discontinued because they seemed to be a big seller.

    Are there any plans to begin manufacturing them again or is a new design in the works? I can't find another case that fits the specifications I'm after so perfectly, or anywhere to close them to be honest!

    Thanks


    Not the Hadron Air but its close, a bit taller will fit a 120mm CLC.
    https://www.evga.com/prod...n=110-MW-1002-K1 


    Everytime I see the Hadron Hydro, I can only see the Beavis and Buttered forehead on it (don`t know why).



    Case: Asus Z370-G Box / MB: Asus Z370-G / CPU: Intel I7 8700K / Mem.: 16GB (2x8) 3000Mhz Corsair Dominator Platinum DDR4 / GPU: GTX 1080TI FTW3 / A.I.O. W.C: EVGA CLC280 / PSU: EVGA SuperNOVA G3 750W

     
     
    #5
    tiberian32
    New Member
    • Total Posts : 39
    • Reward points : 0
    • Joined: 2009/05/02 00:19:33
    • Status: offline
    • Ribbons : 0
    Re: Hadron Air Case 2017/06/29 20:07:04 (permalink)
    EVGA_AndyL
    lappy1987
    Hi,

    I am absolutely desperate to get my hands on one of the Hadron Air cases, seems odd they were discontinued because they seemed to be a big seller.

    Are there any plans to begin manufacturing them again or is a new design in the works? I can't find another case that fits the specifications I'm after so perfectly, or anywhere to close them to be honest!

    Thanks


    Not the Hadron Air but its close, a bit taller will fit a 120mm CLC.
    https://www.evga.com/prod...n=110-MW-1002-K1 




     
    actually I have a question about that case. Will it fit evga own 120mm CLC system ? I know about the one with the clear tubing but i would like a already made solution.
     
    this one
     
    https://www.newegg.com/Product/Product.aspx?Item=N82E16835288007
    EVGA CLC 120 Liquid / Water CPU Cooler, 400-HY-CL12-V1, 120mm Radiator, RGB LED with EVGA Flow Control Software
     
    and this cooler
     
    https://www.newegg.com/Product/Product.aspx?Item=N82E16835288007
     
    EVGA CLC 120 Liquid / Water CPU Cooler, 400-HY-CL12-V1, 120mm Radiator, RGB LED with EVGA Flow Control Software 
    which begs a 2nd question. Can the hadron air and hydro accept the 1080 ti  ( not the ftw or the SC. Just the base one ) with that little hump on the back of the card near the middle with the LED.
    post edited by tiberian32 - 2017/06/29 20:47:53
    #6
    PietroBR
    FTW Member
    • Total Posts : 1202
    • Reward points : 0
    • Joined: 2013/09/14 06:40:52
    • Location: Brazil
    • Status: offline
    • Ribbons : 7
    Re: Hadron Air Case 2017/06/30 04:17:08 (permalink)
    tiberian32
    EVGA_AndyL
    lappy1987
    Hi,

    I am absolutely desperate to get my hands on one of the Hadron Air cases, seems odd they were discontinued because they seemed to be a big seller.

    Are there any plans to begin manufacturing them again or is a new design in the works? I can't find another case that fits the specifications I'm after so perfectly, or anywhere to close them to be honest!

    Thanks


    Not the Hadron Air but its close, a bit taller will fit a 120mm CLC.
    https://www.evga.com/prod...n=110-MW-1002-K1 




     
    actually I have a question about that case. Will it fit evga own 120mm CLC system ? I know about the one with the clear tubing but i would like a already made solution.
     
    this one
     
    https://www.newegg.com/Product/Product.aspx?Item=N82E16835288007
    EVGA CLC 120 Liquid / Water CPU Cooler, 400-HY-CL12-V1, 120mm Radiator, RGB LED with EVGA Flow Control Software
     
    and this cooler
     
    https://www.newegg.com/Product/Product.aspx?Item=N82E16835288007
     
    EVGA CLC 120 Liquid / Water CPU Cooler, 400-HY-CL12-V1, 120mm Radiator, RGB LED with EVGA Flow Control Software
     
    which begs a 2nd question. Can the hadron air and hydro accept the 1080 ti  ( not the ftw or the SC. Just the base one ) with that little hump on the back of the card near the middle with the LED.




    For what I saw in this picture, yes, 1 120mm Radiator should fit in the top (it have two 120mm fans, but one fan is almost blocked by the HDD trays).

    Of course, if you remove the tray, you might be able to fit a 240mm radiator (for storage, I would use a MOBO with two M.2 in RAID0 [say 500Gb each or even 1Tb each])
     
    And for the second question, by the dimensions, yes, It would fit with no problems a 1080Ti Founders Edition (the one with the blower on the back).
     
    Edit: Forgot to mention. The PSU that comes with the case (500w) is not enought to power a 1080Ti for the specs (600w is recommended).
    post edited by PietroBR - 2017/06/30 04:23:36

    Case: Asus Z370-G Box / MB: Asus Z370-G / CPU: Intel I7 8700K / Mem.: 16GB (2x8) 3000Mhz Corsair Dominator Platinum DDR4 / GPU: GTX 1080TI FTW3 / A.I.O. W.C: EVGA CLC280 / PSU: EVGA SuperNOVA G3 750W

     
     
    #7
    AndyL
    EVGA Alumni
    • Total Posts : 30
    • Reward points : 0
    • Joined: 2017/06/27 09:34:52
    • Status: offline
    • Ribbons : 0
    Re: Hadron Air Case 2017/06/30 09:23:28 (permalink)
    PietroBR
    tiberian32
    EVGA_AndyL
    lappy1987
    Hi,

    I am absolutely desperate to get my hands on one of the Hadron Air cases, seems odd they were discontinued because they seemed to be a big seller.

    Are there any plans to begin manufacturing them again or is a new design in the works? I can't find another case that fits the specifications I'm after so perfectly, or anywhere to close them to be honest!

    Thanks


    Not the Hadron Air but its close, a bit taller will fit a 120mm CLC.
    https://www.evga.com/prod...n=110-MW-1002-K1 




     
    actually I have a question about that case. Will it fit evga own 120mm CLC system ? I know about the one with the clear tubing but i would like a already made solution.
     
    this one
     
    https://www.newegg.com/Product/Product.aspx?Item=N82E16835288007
    EVGA CLC 120 Liquid / Water CPU Cooler, 400-HY-CL12-V1, 120mm Radiator, RGB LED with EVGA Flow Control Software
     
    and this cooler
     
    https://www.newegg.com/Product/Product.aspx?Item=N82E16835288007
     
    EVGA CLC 120 Liquid / Water CPU Cooler, 400-HY-CL12-V1, 120mm Radiator, RGB LED with EVGA Flow Control Software
     
    which begs a 2nd question. Can the hadron air and hydro accept the 1080 ti  ( not the ftw or the SC. Just the base one ) with that little hump on the back of the card near the middle with the LED.




    For what I saw in this picture, yes, 1 120mm Radiator should fit in the top (it have two 120mm fans, but one fan is almost blocked by the HDD trays).

    Of course, if you remove the tray, you might be able to fit a 240mm radiator (for storage, I would use a MOBO with two M.2 in RAID0 [say 500Gb each or even 1Tb each])
     
    And for the second question, by the dimensions, yes, It would fit with no problems a 1080Ti Founders Edition (the one with the blower on the back).
     
    Edit: Forgot to mention. The PSU that comes with the case (500w) is not enought to power a 1080Ti for the specs (600w is recommended).


    120MM CLC will fit in the Hadron Hydro not the air.
    1080TI Founder would be able to fit into the Hadron as well.
    #8
    SystemsOgreLoad
    Superclocked Member
    • Total Posts : 103
    • Reward points : 0
    • Joined: 2015/08/13 22:51:05
    • Status: offline
    • Ribbons : 0
    Re: Hadron Air Case 2017/07/26 10:19:51 (permalink)
    EVGA_AndyL
    PietroBR
    tiberian32
    EVGA_AndyL
    lappy1987
    Hi,

    I am absolutely desperate to get my hands on one of the Hadron Air cases, seems odd they were discontinued because they seemed to be a big seller.

    Are there any plans to begin manufacturing them again or is a new design in the works? I can't find another case that fits the specifications I'm after so perfectly, or anywhere to close them to be honest!

    Thanks


    Not the Hadron Air but its close, a bit taller will fit a 120mm CLC.
    https://www.evga.com/prod...n=110-MW-1002-K1 




     
    actually I have a question about that case. Will it fit evga own 120mm CLC system ? I know about the one with the clear tubing but i would like a already made solution.
     
    this one
     
    https://www.newegg.com/Product/Product.aspx?Item=N82E16835288007
    EVGA CLC 120 Liquid / Water CPU Cooler, 400-HY-CL12-V1, 120mm Radiator, RGB LED with EVGA Flow Control Software
     
    and this cooler
     
    https://www.newegg.com/Product/Product.aspx?Item=N82E16835288007
     
    EVGA CLC 120 Liquid / Water CPU Cooler, 400-HY-CL12-V1, 120mm Radiator, RGB LED with EVGA Flow Control Software
     
    which begs a 2nd question. Can the hadron air and hydro accept the 1080 ti  ( not the ftw or the SC. Just the base one ) with that little hump on the back of the card near the middle with the LED.




    For what I saw in this picture, yes, 1 120mm Radiator should fit in the top (it have two 120mm fans, but one fan is almost blocked by the HDD trays).

    Of course, if you remove the tray, you might be able to fit a 240mm radiator (for storage, I would use a MOBO with two M.2 in RAID0 [say 500Gb each or even 1Tb each])
     
    And for the second question, by the dimensions, yes, It would fit with no problems a 1080Ti Founders Edition (the one with the blower on the back).
     
    Edit: Forgot to mention. The PSU that comes with the case (500w) is not enought to power a 1080Ti for the specs (600w is recommended).


    120MM CLC will fit in the Hadron Hydro not the air.
    1080TI Founder would be able to fit into the Hadron as well.




     
    Just a note, if the founders can fit, the sc2 should fit as well
     
    #9
    Jump to:
  • Back to Mobile