I believe that kit is setup for a different die size therefore I would believe it wouldn't work, or not optimally at the very least.
 
Have you considered a 3rd party AIO? NZXT Kraken G12 seems to be a popular mounting choice with various AIOs.

I would say most likely you would be fine to do it. If youre good at modding, or at least decent and clever, you could make it work with a custom ring mount at the very least IF theres a issue. What youre trying to do is exactly what i did with my 780 FE and a 980ti hybrid kit and it worked fine right out of the box. I modded the whole setup anyway cause im a mod/hardware junkie and i cant help myself. Just to satisfy my own curiosity, i took the block from the 980ti kit and matched it up to every series card down to the 8800 GTS 320 and they all have the same mounting hole dimensions, so i could have put that hybrid kit on any card from the 9xx series all the way down. Now, there could be a few outliers here and there but as far as all the 60-80/90 cards go it would fit. So my guess is in your situation it would probably work, but i havent done it with the two your asking about so i cant say for sure.

So I just installed the nzxt g12 with h80i cooler and the temps are rising too quick to even do anything. The pump is running and all as I can hear it but it’s not cooling what am I doing wrong?

Ayetee
Did I do the screws too tight or too loose? Did I plug the fans to the wrong pin connection?

About the only way to tell, is to take it apart and make sure you have good even coverage and squeeze out on all four corners equally so that you know the cooler was mounted flat with the die. You should not need more than 20 inch pounds torque on the screws.

Might sound silly but have you also checked the fan speed on the rad?

HeavyHemi

wmmills
I would say most likely you would be fine to do it. If youre good at modding, or at least decent and clever, you could make it work with a custom ring mount at the very least IF theres a issue. What youre trying to do is exactly what i did with my 780 FE and a 980ti hybrid kit and it worked fine right out of the box. I modded the whole setup anyway cause im a mod/hardware junkie and i cant help myself. Just to satisfy my own curiosity, i took the block from the 980ti kit and matched it up to every series card down to the 8800 GTS 320 and they all have the same mounting hole dimensions, so i could have put that hybrid kit on any card from the 9xx series all the way down. Now, there could be a few outliers here and there but as far as all the 60-80/90 cards go it would fit. So my guess is in your situation it would probably work, but i havent done it with the two your asking about so i cant say for sure.

The is no longer the case. It used to be the same spacing up to the Pascal. Turing and Ampere, do not use the same hole spacing around the die.
Here's the spacing for Turing
 

 
The GTX 1080 Ti hole spacing is 58.4 x 58.4mm
 

Oh that SOOOO figures.Well, its nothing I couldnt get around but i def wouldnt tell a random stranger to try it. Thanx for finding that info hemi.