danielfastshooter
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/03/18 14:49:32
- Status: offline
- Ribbons : 0
Hello, iam from germany, so sorry about my english :) I try to flash the oem bios on my Evga Gtx 1080 Ftw Hybrid to the Asus Strix T4 witch it can make Volt up to 1.2V not 1.093 like oem. So i have try this when the switch was on Slave-Bios..... so but after the reboot i see only black screen.... my questions are.. should i try when the switch is on Maser-Bios??? and the next Question is,...Is this Asus Strix T4 for the gtx 1080 ????? or for the 1080 TI ?????? because,, in the Evga Presicion Tool it comes a question about a 1080 ti after the wrong reboot.. so i dont understand this., ... Is the Asus Strix T4 only for the Ti??? or have anybody a link for a download the T4 for my Gtx 1080 ( not Ti ) ???? i hope you can help... thanks
post edited by danielfastshooter - 2017/07/21 10:14:32
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/21 10:36:48
(permalink)
danielfastshooter should i try when the switch is on Maser-Bios??? and the next Question is,...Is this Asus Strix T4 for the gtx 1080 ????? or for the 1080 TI ?????? because,, in the Evga Presicion Tool it comes a question about a 1080 ti after the wrong reboot.. so i dont understand this., ...
#1 No. #2 It's for the gtx 1080.
|
danielfastshooter
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/03/18 14:49:32
- Status: offline
- Ribbons : 0
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/21 12:19:33
(permalink)
thank you.... ,maybe know anybody what its going on with warrenty ,, because i have open my card and i change the heat paste to liquid metall.... now i lost the warrenty???
|
warrior10
FTW Member
- Total Posts : 1039
- Reward points : 0
- Joined: 2011/03/12 02:29:09
- Status: offline
- Ribbons : 0
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/21 12:23:36
(permalink)
That depends on where you got your Gpu from, but usually it does. :/
My new https://www.gigabyte.com/...70-Gaming-K7-rev-10#kfHAF-X Coolermaster: 4 Fans New Rig:Ryzen 1700 CPU-H100i Liquid arctic Cooled. 16gigs Corsair Vengeance DDR4-2400 180Ti Hybrid Blu-ray drive SCSI CDRW-RW drive SCSI Black WD Black caviar 2-1TB's and 1 500gig WD Blue 1 TB 1 Sand disk SSD 240 for OS Corsair PSU 1020 SWTOR Mouse and Headset Razer CHROMA Keyboard Dell 1444p G-Sync Monitor @144htz to 160htz
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/21 12:24:13
(permalink)
danielfastshooter thank you.... ,maybe know anybody what its going on with warrenty ,, because i have open my card and i change the heat paste to liquid metall.... now i lost the warrenty???
Your warranty is fine as long as you haven't shorted out the card with the liquid metal tim. You'll need to put some regular thermal paste back onto it in the future if you ever need to rma.
|
danielfastshooter
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/03/18 14:49:32
- Status: offline
- Ribbons : 0
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/21 12:30:14
(permalink)
its not possible to clear so perfect that you nothing see that it was liquid metall on..... but the temp its 7-9° better, thats nice.. but why should i not try Srix t4 bios on master-Switch??
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/21 12:32:20
(permalink)
danielfastshooter but why should i not try Srix t4 bios on master-Switch??
Because it caused a black screen on the slave. It will most like cause the same black screen on the master.
|
danielfastshooter
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/03/18 14:49:32
- Status: offline
- Ribbons : 0
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/21 12:42:18
(permalink)
thank you guys for the fast reaction...
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/21 12:42:39
(permalink)
No problem.
|
DSP1
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2016/09/19 14:49:55
- Status: offline
- Ribbons : 1
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/22 05:52:22
(permalink)
Do you use Dispaly Port to connect? You lose one the of the Display Port connectors with the Asus T4 and must reconnect to the other that does work.
|
danielfastshooter
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/03/18 14:49:32
- Status: offline
- Ribbons : 0
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/22 08:17:16
(permalink)
Thank you men.. This was the reason.... but now i have only 1.13V not 1.2V ,,, in msi afterburner i have voltage +100% but why not 1.2v? anybody a idea?
|
DSP1
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2016/09/19 14:49:55
- Status: offline
- Ribbons : 1
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/22 08:25:13
(permalink)
Could be that Boost 3.0 is telling the card it only needs that voltage to achieve the clock speed you have set. Have you set a custom voltage/clock curve? Also, what are your temps like? More volts = higher temps which could also be affecting this.
|
danielfastshooter
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/03/18 14:49:32
- Status: offline
- Ribbons : 0
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/22 08:58:59
(permalink)
i start at 30° Celsius and stop the fan until to 70° ,,, but never more then 1,13V
|
DSP1
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2016/09/19 14:49:55
- Status: offline
- Ribbons : 1
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/22 09:47:51
(permalink)
Not sure I understand what you mean by "stop the fan until 70" What clock speed are you getting at that voltage? What is the temp under load with that voltage and the clock speed? What clock speed/OC do you have to start and what happens as you go under load? For example, my card is set at +135 on Precision which results in a 2152 OC and temps are ~28C. Under load the clock speed goes down due to temps, so that when the temp gets to 43C it steps down to 2139 and stays there unless the temp goes above 52C (which it rarely if ever does being a Hybrid as well). Voltage during this never goes above 1.08. Custom curve on the cards fan set to 70% at 40C. The fans on my rad are set to 2000 rpm when I am gaming or benching.
|
danielfastshooter
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/03/18 14:49:32
- Status: offline
- Ribbons : 0
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/22 15:06:32
(permalink)
now i have a big problem, i did try to flash the classified bios to my ftw hybrid,, and now its not possible to make it back..... i have a copy from my original card do it,, but now when i go in GPU-Z all is by 0 mhz and bios= Unknown,,,, i think its no more possible to make it back :(,,, i should stop to try tuning,, only for 100mhz more,, now i have a mistake... @DSP1 at the most time i have +125 on Presision,,,i use a adapter for the half fan speed on the radiator.... so i have 10°Celsius more then you,, but the same clock,, it goes down to 2126 after long time 2100..... but now i make no more oc,,, now second bios is fail and now i can not sell my card :( i was go in windows with the skylake Igpu and then i have try to do flash back, but thats not possible because nvflash say's " No nvidia Adapters detected" so i think my second bios is damaged... and then i have a third plan... because if you go with skylake igpu in windows in bios you have to Monitor - Priority to IGFX,,, so its in my bios so.... i thought maybe thats the reason for " no nvidia adapters" ,,, so i have change it to PciE1 - Priority,, and then i was going in windows with a black screen,, but before i notice all steps to flash the bios,, and i have done this with a black screen,, but it was not possible because windows dont start when it has no graphics... so now i sell my card for 300 and then i buy 1080ti :(
post edited by danielfastshooter - 2017/07/22 15:45:03
|
danielfastshooter
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/03/18 14:49:32
- Status: offline
- Ribbons : 0
Re: GTX 1080 FTW Hybrid Bios Flashen
2017/07/24 12:12:14
(permalink)
hi guys,,, anybody know why the ftw hybrid goes not to 1.2v with the asus t4 bios?? not more then 1.12v,,, and anybody know to make a real volt mod??? when you know a site,, so i will try it by my card... i saw a side, but it was the founders edition and not so gut pictures,,,..
post edited by danielfastshooter - 2017/07/24 12:16:43
|