streetglide420
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2018/09/09 12:47:31
- Location: Virginia
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 11:56:32
(permalink)
when the fans actually decide they want to work, the mem stays in the 70s and the gpu stays around 70 as well, however sometimes two of the fans wont kick on until the card starts to overheat. Weird. really wonky.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 11:59:37
(permalink)
streetglide420
when the fans actually decide they want to work, the mem stays in the 70s and the gpu stays around 70 as well, however sometimes two of the fans wont kick on until the card starts to overheat. Weird. really wonky.
Yeah I finally figured out through trial and error how to enable automatic fan control in PX1 and put a slightly more aggressive fan curve in there. So far my three fans have been running fine whilst gaming. I keep a close watch on them though.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
streetglide420
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2018/09/09 12:47:31
- Location: Virginia
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 12:00:39
(permalink)
d.burnette
streetglide420
when the fans actually decide they want to work, the mem stays in the 70s and the gpu stays around 70 as well, however sometimes two of the fans wont kick on until the card starts to overheat. Weird. really wonky.
Yeah I finally figured out through trial and error how to enable automatic fan control in PX1 and put a slightly more aggressive fan curve in there. So far my three fans have been running fine whilst gaming. I keep a close watch on them though.
with the fans on MAX, and the side of my case OFF i got 10c drop haha
|
Zybane
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2012/05/10 00:39:54
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 12:22:26
(permalink)
I've been checking out the memory thermal pads here: https://www.youtube.com/watch?v=U5XKtobx7ro They look kinda thick. But that shouldn't be the cause of such high memory temps IMO. 75C memory is like chips with no contact at all.
|
bladeofblue
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2015/05/13 00:13:05
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 12:31:04
(permalink)
Would also like to see an official response to this, not liking 2 of my memory banks getting to 80C while the other one sits comfortably at 50C
|
brahmzy
New Member
- Total Posts : 86
- Reward points : 0
- Joined: 2004/07/27 06:55:36
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 12:32:35
(permalink)
Can someone with a XC Ultra pipe in on their temps? Or a 2080?
|
bladeofblue
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2015/05/13 00:13:05
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 12:37:48
(permalink)
|
Nalph
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2018/10/23 17:58:33
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 12:52:06
(permalink)
soliex
Yeah makes me nervous too, getting Wednesday
Oh yeah, Saw you mention before that you had got one. I noticed returns are a 15% re-stocking fee if opened or something? If im understanding that right. I don't wanna pay $205.00 to simply open the box and test the card to find out i'm having multiple issues, or hot mem banks. I'd love to open the box up and try the card out, but i'm not into paying 200$ to simply test the card... Yes i could RMA but maybe this is an issue that could take them some time to fix, or maybe changing design, idk... Could be a lengthy process
|
Tech_JoseC
iCX Member
- Total Posts : 383
- Reward points : 0
- Joined: 2017/06/05 00:00:00
- Location: EVGA
- Status: offline
- Ribbons : 2
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 13:03:06
(permalink)
Hello, We had some instances that the fans were not running when running PX1 due to a MCU update not applying. Please download and install the corresponding MCU update and check to see if that helps remedy the issues if not please post your findings. You can find the MCU FAQ here, https://www.evga.com/support/faq/afmmain.aspx?faqid=59742Thank you, Jose C
|
soliex
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2006/02/21 16:42:31
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 13:36:49
(permalink)
Nalph
soliex
Yeah makes me nervous too, getting Wednesday
Oh yeah, Saw you mention before that you had got one. I noticed returns are a 15% re-stocking fee if opened or something? If im understanding that right. I don't wanna pay $205.00 to simply open the box and test the card to find out i'm having multiple issues, or hot mem banks.
I'd love to open the box up and try the card out, but i'm not into paying 200$ to simply test the card... Yes i could RMA but maybe this is an issue that could take them some time to fix, or maybe changing design, idk... Could be a lengthy process
I'm not really considering ditching EVGA, I've owned 7 previous graphic cards form them and have always had a good experience wherever I had an issue. I have faith they will sort these issues out. I'm eager to see how the card performs and would love to report no issues.
|
streetglide420
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2018/09/09 12:47:31
- Location: Virginia
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 13:38:40
(permalink)
EVGATech_JoseC
Hello,
We had some instances that the fans were not running when running PX1 due to a MCU update not applying. Please download and install the corresponding MCU update and check to see if that helps remedy the issues if not please post your findings. You can find the MCU FAQ here, https://www.evga.com/support/faq/afmmain.aspx?faqid=59742
Thank you,
Jose C
is this different from the MCU that Jacob posted a few days ago? If so, i already tried that.
post edited by streetglide420 - 2018/10/28 13:43:43
Attached Image(s)
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 13:41:20
(permalink)
EVGATech_JoseC
Hello,
We had some instances that the fans were not running when running PX1 due to a MCU update not applying. Please download and install the corresponding MCU update and check to see if that helps remedy the issues if not please post your findings. You can find the MCU FAQ here, https://www.evga.com/support/faq/afmmain.aspx?faqid=59742
Thank you,
Jose C
My fans show they are running in PX1 though? On the left hand side under Fan 1, 2, and 3. each show spinning.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Tech_JoseC
iCX Member
- Total Posts : 383
- Reward points : 0
- Joined: 2017/06/05 00:00:00
- Location: EVGA
- Status: offline
- Ribbons : 2
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 13:58:45
(permalink)
streetglide420
is this different from the MCU that Jacob posted a few days ago? If so, i already tried that.
It is the same MCU update that Jacob F posted a few days ago. Just wanted to ensure that the fans were spinning first and foremost which is part of the troubleshooting process. This is something that we are looking into, if your temperatures under load for the memory bank end up at above 80C +- please contact us for a RMA. d.burnette
My fans show they are running in PX1 though? On the left hand side under Fan 1, 2, and 3. each show spinning.
Just wanted to confirm that the fans are indeed confirmed to be spinning, I wanted to rule out a software bug. However your temperatures are fine and are in line with what they should be around at. Your temperatures are are in line with what I would get with my GTX 1080 ti FTW3's under load with an aggressive fan curve. But as I stated above, we are going to look into this with our PM team for you guys.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 14:00:39
(permalink)
EVGATech_JoseC
d.burnette
My fans show they are running in PX1 though? On the left hand side under Fan 1, 2, and 3. each show spinning.
Just wanted to confirm that the fans are indeed confirmed to be spinning, I wanted to rule out a software bug. However your temperatures are fine and are in line with what they should be around at. Your temperatures are are in line with what I would get with my GTX 1080 ti FTW3's under load with an aggressive fan curve. But as I stated above, we are going to look into this with our PM team for you guys.
Yeah my main concern is those two memory banks like 30c hotter than the one.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
streetglide420
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2018/09/09 12:47:31
- Location: Virginia
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 14:03:29
(permalink)
EVGATech_JoseC
streetglide420
is this different from the MCU that Jacob posted a few days ago? If so, i already tried that.
It is the same MCU update that Jacob F posted a few days ago. Just wanted to ensure that the fans were spinning first and foremost which is part of the troubleshooting process.
This is something that we are looking into, if your temperatures under load for the memory bank end up at above 80C +- please contact us for a RMA.
d.burnette
My fans show they are running in PX1 though? On the left hand side under Fan 1, 2, and 3. each show spinning.
Just wanted to confirm that the fans are indeed confirmed to be spinning, I wanted to rule out a software bug. However your temperatures are fine and are in line with what they should be around at. Your temperatures are are in line with what I would get with my GTX 1080 ti FTW3's under load with an aggressive fan curve. But as I stated above, we are going to look into this with our PM team for you guys.
Thanks, I've already been set up for an RMA, just waiting for it to be approved so i can send my CC info for the $1 hold. I'll do what ever is asked of me to trouble shoot this card from my end. Id hate to RMA a card that could be resolved with a bios update or software fix.
|
Tech_JoseC
iCX Member
- Total Posts : 383
- Reward points : 0
- Joined: 2017/06/05 00:00:00
- Location: EVGA
- Status: offline
- Ribbons : 2
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 14:12:53
(permalink)
d.burnette
Yeah my main concern is those two memory banks like 30c hotter than the one.
Yeah, this is something that I'll look into as well. However, I suspect that it may have to do with the way that the heat is flowing on the graphics card, which shouldn't cause issues however. streetglide420
Just wanted to confirm that the fans are indeed confirmed to be spinning, I wanted to rule out a software bug. However you
Thanks, I've already been set up for an RMA, just waiting for it to be approved so i can send my CC info for the $1 hold. I'll do what ever is asked of me to trouble shoot this card from my end. Id hate to RMA a card that could be resolved with a bios update or software fix.
Definitely and thank you for your understanding.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 14:52:43
(permalink)
EVGATech_JoseC
d.burnette
Yeah my main concern is those two memory banks like 30c hotter than the one.
Yeah, this is something that I'll look into as well. However, I suspect that it may have to do with the way that the heat is flowing on the graphics card, which shouldn't cause issues however.
Jose, Could this have anything to do at all with my Fan 1 spinning around 500 rpm slower than fans 2 and 3? So far those two memory banks have reached about 73-75c on me, the other one around 48c. Guess still safe operating, but concerning nonetheless.
post edited by d.burnette - 2018/10/28 14:54:58
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
toncij
Superclocked Member
- Total Posts : 213
- Reward points : 0
- Joined: 2016/07/27 08:17:38
- Location: Europe
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:06:45
(permalink)
So left memory bank is at 45-50, but top and right are at 75-80.
Is it maybe that the card is not using all memory banks most of the time?
Try a memory-heavy (CUDA) benchmark or high-resolution one (to force 11GB usage) and report temperatures. Something like 200% rendering of 4K in Battlefield...
If a fully used memory situation gives differently hot memory banks, it's something about no/weak contact.
If the left bank gets as hot as top and right, it's all ok most probably.
|
streetglide420
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2018/09/09 12:47:31
- Location: Virginia
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:08:21
(permalink)
toncij
So left memory bank is at 45-50, but top and right are at 75-80.
Is it maybe that the card is not using all memory banks most of the time?
Try a memory-heavy (CUDA) benchmark or high-resolution one (to force 11GB usage) and report temperatures. Something like 200% rendering of 4K in Battlefield...
If a fully used memory situation gives differently hot memory banks, it's something about no/weak contact.
If the left bank gets as hot as top and right, it's all ok most probably.
About to play battlefield now . I'll see what happens
|
aldur80
iCX Member
- Total Posts : 280
- Reward points : 0
- Joined: 2012/08/17 18:35:56
- Status: offline
- Ribbons : 1
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:11:05
(permalink)
EVGATech_JoseC
This is something that we are looking into, if your temperatures under load for the memory bank end up at above 80C +- please contact us for a RMA.
So with the fans at 100%, and I can confirm that the fans are indeed spinning, the top and right memory banks reach 81 C, does that mean I should request an RMA?
|
toncij
Superclocked Member
- Total Posts : 213
- Reward points : 0
- Joined: 2016/07/27 08:17:38
- Location: Europe
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:16:06
(permalink)
Make sure memory is filled to the top, meaning max resolution you can force on it. And AA. Check with GPU-Z.
|
Tech_JoseC
iCX Member
- Total Posts : 383
- Reward points : 0
- Joined: 2017/06/05 00:00:00
- Location: EVGA
- Status: offline
- Ribbons : 2
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:39:20
(permalink)
d.burnette
Jose,
Could this have anything to do at all with my Fan 1 spinning around 500 rpm slower than fans 2 and 3?
So far those two memory banks have reached about 73-75c on me, the other one around 48c.
Guess still safe operating, but concerning nonetheless.
That would be iCX technology working its magic :) Depending on the temperatures of the components on your graphics card, the graphics card will adjust the fan speeds. If you want all three fans running at fixed speeds you can set a fixed fan speed in Precision X1 and hit apply to set that value. You can learn more about iCX here https://www.evga.com/Concept/Product_VGA.asp
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:43:30
(permalink)
EVGATech_JoseC
d.burnette
Jose,
Could this have anything to do at all with my Fan 1 spinning around 500 rpm slower than fans 2 and 3?
So far those two memory banks have reached about 73-75c on me, the other one around 48c.
Guess still safe operating, but concerning nonetheless.
That would be iCX technology working its magic :) Depending on the temperatures of the components on your graphics card, the graphics card will adjust the fan speeds. If you want all three fans running at fixed speeds you can set a fixed fan speed in Precision X1 and hit apply to set that value. You can learn more about iCX here https://www.evga.com/Concept/Product_VGA.asp
Ok thanks, no problem with it myself it just came to mind on those two hotter memory banks. Pure speculation on my part lol.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Nalph
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2018/10/23 17:58:33
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:44:00
(permalink)
streetglide420
EVGATech_JoseC
streetglide420
is this different from the MCU that Jacob posted a few days ago? If so, i already tried that.
It is the same MCU update that Jacob F posted a few days ago. Just wanted to ensure that the fans were spinning first and foremost which is part of the troubleshooting process.
This is something that we are looking into, if your temperatures under load for the memory bank end up at above 80C +- please contact us for a RMA.
d.burnette
My fans show they are running in PX1 though? On the left hand side under Fan 1, 2, and 3. each show spinning.
Just wanted to confirm that the fans are indeed confirmed to be spinning, I wanted to rule out a software bug. However your temperatures are fine and are in line with what they should be around at. Your temperatures are are in line with what I would get with my GTX 1080 ti FTW3's under load with an aggressive fan curve. But as I stated above, we are going to look into this with our PM team for you guys.
Thanks, I've already been set up for an RMA, just waiting for it to be approved so i can send my CC info for the $1 hold. I'll do what ever is asked of me to trouble shoot this card from my end. Id hate to RMA a card that could be resolved with a bios update or software fix.
$1 hold? Is that the system where they send you a new card before you send them yours, so there is no down-time on your end?. Also i'm guessing people who own the card already will be sent a new one, no having to wait for them to become available, etc?
|
streetglide420
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2018/09/09 12:47:31
- Location: Virginia
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:46:07
(permalink)
Battlefield 1 4k 200% scaling ran at a choppy but impressive 40fps. 5 minutes of play Yeilded:
Max GPU temp :69c
Gpu2 max 78c
Gpu mem1 max 52c
Gpu mem2 max 84c
Gpu mem3 max 82c
|
streetglide420
Superclocked Member
- Total Posts : 246
- Reward points : 0
- Joined: 2018/09/09 12:47:31
- Location: Virginia
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:53:28
(permalink)
Nalph
streetglide420
EVGATech_JoseC
streetglide420
is this different from the MCU that Jacob posted a few days ago? If so, i already tried that.
It is the same MCU update that Jacob F posted a few days ago. Just wanted to ensure that the fans were spinning first and foremost which is part of the troubleshooting process.
This is something that we are looking into, if your temperatures under load for the memory bank end up at above 80C +- please contact us for a RMA.
d.burnette
My fans show they are running in PX1 though? On the left hand side under Fan 1, 2, and 3. each show spinning.
Just wanted to confirm that the fans are indeed confirmed to be spinning, I wanted to rule out a software bug. However your temperatures are fine and are in line with what they should be around at. Your temperatures are are in line with what I would get with my GTX 1080 ti FTW3's under load with an aggressive fan curve. But as I stated above, we are going to look into this with our PM team for you guys.
Thanks, I've already been set up for an RMA, just waiting for it to be approved so i can send my CC info for the $1 hold. I'll do what ever is asked of me to trouble shoot this card from my end. Id hate to RMA a card that could be resolved with a bios update or software fix.
$1 hold? Is that the system where they send you a new card before you send them yours, so there is no down-time on your end?. Also i'm guessing people who own the card already will be sent a new one, no having to wait for them to become available, etc?
yes your are correct, its a rapid RMA. However im not sure the wait time with the current high demand and low stock. I would like to think im prioritized over new orders, but Im not sure about that.
|
bladeofblue
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2015/05/13 00:13:05
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 15:58:59
(permalink)
Keep in mind also, 1080 ti FTW3 gets the GDDR5 to about 82C in a closed case torture test
|
toncij
Superclocked Member
- Total Posts : 213
- Reward points : 0
- Joined: 2016/07/27 08:17:38
- Location: Europe
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 17:17:21
(permalink)
streetglide420
Battlefield 1 4k 200% scaling ran at a choppy but impressive 40fps. 5 minutes of play Yeilded:
Max GPU temp :69c
Gpu2 max 78c
Gpu mem1 max 52c
Gpu mem2 max 84c
Gpu mem3 max 82c
To me, this really looks like mem 2-3 are not being properly cooled. Or the proximity of VRM heats memory 3 and top side of the chip is insanely more hot than the left side so it heats top mem 2 significantly. But both explanations are silly. I'd bet on mem 2-3 not being cooler properly.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 17:32:54
(permalink)
toncij
streetglide420
Battlefield 1 4k 200% scaling ran at a choppy but impressive 40fps. 5 minutes of play Yeilded:
Max GPU temp :69c
Gpu2 max 78c
Gpu mem1 max 52c
Gpu mem2 max 84c
Gpu mem3 max 82c
To me, this really looks like mem 2-3 are not being properly cooled.
Or the proximity of VRM heats memory 3 and top side of the chip is insanely more hot than the left side so it heats top mem 2 significantly. But both explanations are silly. I'd bet on mem 2-3 not being cooler properly.
That is my guess as well as the heatsink might not be in full contact or that part of the heatsink is just too saturated.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
nesbit
New Member
- Total Posts : 98
- Reward points : 0
- Joined: 2016/11/04 18:38:37
- Status: offline
- Ribbons : 0
Re: GDDR6 FTW3 operating temperatures?
2018/10/28 21:32:22
(permalink)
GTXJackBauer
toncij
streetglide420
Battlefield 1 4k 200% scaling ran at a choppy but impressive 40fps. 5 minutes of play Yeilded:
Max GPU temp :69c
Gpu2 max 78c
Gpu mem1 max 52c
Gpu mem2 max 84c
Gpu mem3 max 82c
To me, this really looks like mem 2-3 are not being properly cooled.
Or the proximity of VRM heats memory 3 and top side of the chip is insanely more hot than the left side so it heats top mem 2 significantly. But both explanations are silly. I'd bet on mem 2-3 not being cooler properly.
That is my guess as well as the heatsink might not be in full contact or that part of the heatsink is just too saturated.
I'm hoping it doesn't take EVGA long to confirm or deny these. I'm holding off on buying another brand because I like EVGA. They could probably rework them quickly before they sell them.
|