XFX AMD Radeon VII 16GB HBM2, 1750 MHz Boost, 1801 MHz Peak, 3xDP 1xHDMI Pci-E 3.0 $569.99 Running on Air. Now $529.99
Shipped EK-Vector Radeon VII RGB - Nickel + Plexi ($95.99) (Now $79.99) + EK-Vector Radeon VII Backplate - Nickel ($29.99) Both for less than $150 or €113.81
Installed on;
Motherboard EVGA X299 DARK, 151-SX-E299-KR, LGA 2066
CPU Intel Core i9-7920X Skylake X 12-Core 2.9 GHz
Memory G.SKILL 4x Ripjaws V Series 32GB (4 x 8GB) F4-3600C17Q-32GVK
Replaced the EVGA GTX 1080 Ti FE Graphics Card with the EK Water Block and Back Plate.
 
So far I had to Down Clock the GPU to Fold on this Graphics Card.
Running for about 12 hours now and have had 5 Complete and 6 9 12 Failed so far.
GPU Temperatures are only 45°C - 55°C or less but the Hot Spot is seeing 65°C - 75°C.
Fans running 90% or 3850 RPM Voltage 1.100V Memory 920 MHz to 1000 MHz and the GPU Clock running at 1390 MHz - 1770 MHz.
The AMD Radeon VII Runs at about the same as a NVIDIA GTX 1080 Ti Graphics Card.
Stock Settings
 
I did not see any issues with Crunching BOINC GPU Projects, None.

Temperatures seem fine and dropping to 1700 did not help so I will drop down to 1600 now and maybe drop the Memory now as well to maybe
All I see is this error
21:45:00:WU00:FS00:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
21:45:00:WU00:FS00:0x21:ERROR:114: Max Retries Reached
21:45:01:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:11714 run:0 clone:5695 gen:13 core:0x21 unit:0x000000188ca304f15b21ad260adb7945
22:12:24:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
22:12:24:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:14285 run:0 clone:49 gen:93 core:0x21 unit:0x0000006a80fccb0a5d9e117bca1c5d78
But I am not overclocking the Graphics Card.
Boost Clock - 1750MHz
Peak Clock - 1801 MHz
May I should remove the Beta Flag....
Running this now.
 Dropped to 1600 MHz and the Memory to 800 MHz
 

On these cards it is good to drop the voltage some. Helps most with temps

 

What ver of catalyst driver software?
How many GPU monitoring software do you have running at once? They say running more than one can cause issues.
Maybe close all of those programs, use the wattman that comes in the MD package.
It is under games then the tab to the right, it is the middle tab.
Try leaving GPU and mem at stock, up the voltage some to 1070 use the fan section to set a fan curve.
Try setting the power to 0 or -10 and see if that helps.

I did get this just now;
14:03:00:WU00:FS00:0x21:Completed 300000 out of 7500000 steps (4%)
14:04:18:WU00:FS00:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
14:07:16:WU00:FS00:0x21:Completed 375000 out of 7500000 steps (5%)
But it is still running now at 58% so maybe I will drop another 25 MHz on the GPU Clock and up the Voltage to 1050.

If you right click in the center of the home screen it should give you the option to open the AMD software.
Or do you see a bunch of red dots in a circle like in the taskbar or the /\ up arrow on the far right of the taskbar?
That is the icon for AMD software.

Not using AB here only the AMD Software, Folding seems to be working ATM but need to wait until at lest 80%
Mega 17 runs smooth and Folding is all over the place but this is normal for Folding WUs. 

 
Also now way to set the Fan in the AMD Software.

Cool GTX
Thanks for sharing Your Testing

Thank you and you are Welcome

I ignore the hot spot, don't know why they even show it. I bet the Nvidia GPUs have a hot spot to they never show.
Either way I am sure once we both get the blocks installed it will be lower.
 

And yes you can set the fan, I have a custom fan curve.

Isn't that GPU-z in all the pics on the left side with the red lines?
 

Takes a while to get used to their program. Seems to work ok.
I did read somewhere that the older ver. of it after this GPU came out works better then the newest ver.
I think I am on an older ver, I have to check. It is on a clean new win10 install just 2 weeks ago.
Not sure what I did not, have to look.

Folded All Night Without any issue, thanks Bill for your help with this card.

I don't know much about AMD, but I do know on Nvidia cards, that undervolting or overclocking,is  a main cause of failed Wu's. (On Nvidia GPUs).
Undervolting or overclocking errors, will give the same error in FAH console.
 
I stay away from undervolting, and let the driver deal with the voltage. 
And only use the power slider, to cap the power.
 
This gives 2 advantages:
1- No undervoltage errors
2- Dynamically adjust frequency to the most optimal (without errors).
 
This last one is important, when you're able to get the card's temperature down, as the Nvidia driver can get close to stock boost speeds (within 50-150Mhz), when the card is cold enough (and with an overclock).
 
Doing it this way, I can actually overclock, and power cap;and just focus on tuning my overclock settings. The rest, the driver takes care for.
 
I realize this thread is about AMD and not Nvidia, but perhaps there are some parallels between the brands.