EVGA

Altec Lansing ACS48's Please help me wire these things. These are ACS48's! Need help!!

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
northgalocal
New Member
  • Total Posts : 41
  • Reward points : 0
  • Joined: 2005/08/12 17:24:14
  • Location: Alphalanta, GA.
  • Status: offline
  • Ribbons : 0
Re:Altec Lansing ACS48's Please help me wire these things. These are ACS48's! Need help! 2011/11/28 18:55:12 (permalink)
FYI, y'all. I did fix them and they sound as awesome as ever. I 'almost' got some newer speaks, but just couldn't let go(cheap miser). But I'm happy to listen to opinions. For general gaming, these speakers all in the HALL OF FAME!

][ E759 Classified #262 ][ I7-970 6-Core ][ 12GB Muskin RL 994056 ] -@- [ 3.81GHz/1656.4MHz/7,7,7,24 ][ (x2) 580's(P3-1582's)]@[861MHz/2240 ][ OCZ Revo 3 240GB ][ "Under Water" parts - CPU:EK Supreme HF Cu - GPU's:HeatKiller X3's - M/B:BitsPower Full Board block/Reg ][ (x2) Swiftech MCP655's ][ DD Res ][ MagiCool 720 Hexa radiator ][ TT Black Widow 850Watt X2 ][ Hand-built aluminum case ][
#31
J3batDerhaka
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2016/07/14 20:49:38
  • Status: offline
  • Ribbons : 0
Re:Altec Lansing ACS48's Please help me wire these things. These are ACS48's! Need help! 2016/07/14 21:00:08 (permalink)
Deleted
post edited by J3batDerhaka - 2016/07/15 00:07:51
#32
ttmax
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2023/02/05 10:24:40
  • Status: offline
  • Ribbons : 0
Re: Altec Lansing ACS48's Please help me wire these things. These are ACS48's! Need help 2023/02/05 10:42:16 (permalink)
I don't know if anybody will get this post but gonna try anyway.  I also have an old set of ACS48's that I was trying to wire as a sub only.  Unfortunately, i was unable to locate the satellite speakers.  I attempted to bypass the satellites, with the on/off switch and volume control, by making a DIN plug using the pin-outs I found in this or another post on similar subject.  I used 2 momentary 2 pole switches that I wired like this:
1) one to the SW1+ and Ground (a stranded cable in DIN Cable connected to Male DIN metal outer shell)
2) other to SW2+ and Ground 
an LED to LED+ and Ground.
 
I then tested by momentarily pressing both switches but no turn on and no LED activation.  
 
I thought this would be simple but without the satellite speakers to use, i may be missing something.  I did, utilize my Klipsch ProMedia Ultra 5.1 Gaming Sub, but would still like to be able to use the Altec Lansing Sub.  Being an engineer I still want to figure this out.  Any help is appreciated!
 
 
#33
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile