Hello, the problem is easy to write : after I changed my RAM, my pc is quasi impossible to boot normally with 3200 Mhz
The spec for begin
EVGA X99 FTW K Bios 2.08
i7 6950X
(OC at 4,4 Ghz, Core at 1,300 V and Core Offset at +50 mV for a total 1,350 V)
Ring at 3200 Mhz (never more)
Old RAM :
1 kit 2 X 8 Go Hall of fame D4-3600 (samsung B die)
1 kit 2 X 8 GO Patriot 3733 Mhz
Both was ok in quad channel at 3200 Mhz (15 19 19), but I had few... crash in video game, it was hard to found for what during a long time. I both a other kit 32 Go Kingston, for replace the patriot Kit, and I had no crash with the kingston. I choose to sold the kingston, and I bouth 2 kits 32 Go of Klevv for have the same RAM on 4 slots (and it was a good price too, 64 Go for 133 €)
New Kit ram
2 kits 2 x 16 Go (total 64 Go) Klevv CRAS X RGB 3200 Mhz (16 18 18 38)
Old ram was ok at 3200 Mhz, the new RAM (Klevv CRAS X with 4 stick of 16go) function only at 3000 Mhz with no problem (3000 Mhz 15 17 17 35 with VSA offset between +350 to +370 mV) (at 3200 Mhz, I need put a VSA Offset at +500 mV, but that function just 2 times, and I have still few boot on the launch).
I trying with XMP and with manual settings, and I have the same problem at 3200 Mhz : infinite reboot (infinite reboot on the second video, on the last part of the video).
I made 2 videos, but warning, is in french. But you will see the setting I have in the BIOS.
https://www.dailymotion.com/video/x8lazxlhttps://www.dailymotion.com/video/x8lazxm My question : for be at 3200 Mhz, what setting I need change ? For have a normal boot (press button => boot in one time, same all normal PC)
Thx you
post edited by MsgMatthieu - 2023/05/28 03:41:38