EVGA

Z390 no boot no display

Author
Post
Essentials Only Full Version
Skeeetz
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2020/04/22 19:04:36
  • Status: offline
  • Ribbons : 0
2022/01/01 15:50:32 (permalink)
Hey all, looking for some direction here, have a pc i built about a year and a half ago has never given me problems, few days ago I went to turn it on and got nothing on either display, checked cables cleaned and tried switching ram, different graphics card and psu (along with resetting cmos)
Pc specs
I7 9700k
Evga z390 ftw
Nvidia 1070
evga 750 supernova
16gb Corsair vengeance lpx ram,
Wd 500gb m.2 with windows 10
Barracuda 2tb ssd
Turn pc on everything lights up fans and cooler are on get 5 beeps and an A6 code any input appreciated thank you
#1

1 Reply Related Threads
    Mister E...
    New Member
    • Total Posts : 89
    • Reward points : 0
    • Joined: 2005/05/12 18:10:06
    • Status: offline
    • Ribbons : 3
    Re: Z390 no boot no display 2022/01/01 19:33:25 (permalink)
    According to the manual, 5 beeps means no keyboard detected (or no video card detected).

    A6, however, references SCSI initialization.

    Have you disconnected your various additional devices to rule out any of them being the culprit - fully disconnect SSDs (power and data cables), all USB devices, even remove the m.2.

    If you've tested your PSU, RAM and video card on another PC, then you can likely rule them out. Stick with just CPU, one stick of RAM (try different slots as well if it's still not posting) and M/B and see if the POST error changes. Add the video card and see if you can access the BIOS.
    post edited by Mister E... - 2022/01/01 19:35:57
    #2
    Jump to:
  • Back to Mobile