EVGA

EVGA Precision X1 failed firmware update on 3090 Kingpin

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
RAV-Daarken
New Member
  • Total Posts : 25
  • Reward points : 0
  • Joined: 2015/11/27 10:55:03
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision X1 failed firmware update on 3090 Kingpin 2021/12/20 17:07:39 (permalink)
bavor
I gave it one more shot before sending my 3090 KP with the failed MCU BIOS flash back to EVGA.
Windows 10 20H2
Precision X1 V1.1.8
Clean install of Nvidia Driver Version: 497.09
Intel i9-1900K in Asus ROG Maximus Apex XIII motherboard with the latest BIOS(v1007)
newest drivers for all hardware
The MCU Firmware failed to update through PX1 just as before.  When installing trying Precision X1 V1.2.9 after that to do a MCU firmware update, it also failed.


Good try.
I am also plagued by this issue.
However this happened to me yesterday, when I opened PX1, it auto updated to 1.3.0. and it called for a firmware update, and it failed.
I removed all evga software and also cleaned the registry and installed PX1-v1.1.8 as mentioned by boyleusa, and it failed.
I do not have a machine with windows 20H2 as I tend to keep them all updated.
 
I did try some gaming and I had no issues with BF2042 set to ultra and on a ultrawide.

Intel i9-11900K
eVGA Z590 FTW WiFi
eVGA 3090 Kingpin Hybrid
eVGA NU Audio Pro
eVGA SuperNOVA 1000 G6
eVGA Z20 Keyboard
eVGA X20 Wireless Mouse
eVGA XR1
eVGA CLC 360
Samsung 980 Pro 2TB/950 Pro 512GB M.2 SSD / 850 Pro 512GB / 840 Evo 500GB / 870 EVO 1TB
#31
bavor
SSC Member
  • Total Posts : 994
  • Reward points : 0
  • Joined: 2008/02/20 21:24:43
  • Status: offline
  • Ribbons : 6
Re: EVGA Precision X1 failed firmware update on 3090 Kingpin 2021/12/20 23:05:33 (permalink)
RAV-Daarken
I do not have a machine with windows 20H2 as I tend to keep them all updated.

 
EVGA support said it had to be a certain version or newer.  If Windows 10 is updated, it shouldn't be an issue.
 
I did manage to update my other KP 3090 and the warranty replacement KP 3090 on a Z590 system with a 10900K and fully updated Windows 10.
 
#32
rblaes_99
FTW Member
  • Total Posts : 1951
  • Reward points : 0
  • Joined: 2007/02/17 06:25:20
  • Status: offline
  • Ribbons : 15
Re: EVGA Precision X1 failed firmware update on 3090 Kingpin 2021/12/22 09:41:35 (permalink)
bavor after reading this I closed my eyes and held my breath as X1 updated my kingpin firmware.  on windows 11.    
 
mine updated ok.


#33
bavor
SSC Member
  • Total Posts : 994
  • Reward points : 0
  • Joined: 2008/02/20 21:24:43
  • Status: offline
  • Ribbons : 6
Re: EVGA Precision X1 failed firmware update on 3090 Kingpin 2021/12/24 06:50:33 (permalink)
I successfully updated both my RMA replacement 3090 kingpin card and the other 3090 kingpin I have to the latest firmware on the system I previously mentioned.
 
Windows 10 21H2
Precision X1 V1.2.9.0
Clean install of Nvidia Driver Version: 497.09
Intel i9-1900K in Asus ROG Maximus Apex XIII motherboard with the latest BIOS(v1007)
Newest drivers for all hardware
#34
Yanno94
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2020/12/14 03:45:14
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 failed firmware update on 3090 Kingpin 2022/01/15 03:53:03 (permalink)
Hello, I know that those who visit this forum have the misfortune to know the failure of the firmware.
I have known it yesterday evening and if I post here it is because there is hope.
My 3090 kingpin freshly installed in a new water cooling after I launched the updates of windows, I take the precision X1 and the surprise I launch the update and I see failure, as the images of the beginning of this post.
In my head I knew that a firmware that fails is really bad but, as the card was still working I persisted.
Reinstallation of windows with usb key
Windows Feature Experience Pack 120.2212.3920.0
19044.1288
I update the drivers with driver booster and I launch the precision X1 (1.3.0.0) which results by a failure.
I say to myself well that ***** of RMA then it will remain in the loop a moment.
2min later I launch windows update and I retry precision x1 and the magic it passes.
To summarize, with luck it will do it!
Sorry for the long post, but this success was worth sharing.
Get lucky.
 
I used  Deepl
#35
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile