remidian
iCX Member
- Total Posts : 430
- Reward points : 0
- Joined: 2008/10/09 16:48:00
- Status: offline
- Ribbons : 1
Just got my notification and I’m thinking about buying the Patriot Viper 16gb DDR4 4400 kit(iPVS416G440C9K) with a 10900kf. I’m hoping they are compatible. I’m researching from my smart phone so it’s a bit of a pita. Thanks 😊 I can see supported RAM for older models but not the 500
post edited by remidian - 2021/07/01 15:22:29
3080 FTW3 Ultra, Hero XIII, 11900k, Samsung 980 PRO 1TB, Acer XB270HU 1440p/144hz, Evga Supernova 1000w platinum. Heatware
|
kalsim
New Member
- Total Posts : 92
- Reward points : 0
- Joined: 2015/06/19 22:40:11
- Status: offline
- Ribbons : 1
Re: Supported memory list?
2021/07/01 15:31:34
(permalink)
Reality is, you won't know until you actually try it.
11700K 5.0 2C / 4.9 8C | EVGA Z590 FTW 1.08 | EVGA RTX 3080Ti FTW3 Ultra | EVGA 750 G2 | 2x16GB DR G.Skill TridentZ 3600 CL16 @ 4266 CL16 Gear 2 | Samsung 980 Pro NVMe 1TB | Phanteks Evolv ATX | Alienware 34" AW3418DW
|
RogueMaster
iCX Member
- Total Posts : 403
- Reward points : 0
- Joined: 2007/03/19 20:15:42
- Status: offline
- Ribbons : 2
Re: Supported memory list?
2021/07/01 20:56:46
(permalink)
I thought I'd read somewhere, in the not too distant past, that EVGA had decided not to do QVL for motherboards now.
I could be wrong on that. I do know I haven't seen a thing that would indicate that one exists for their Z590 boards.
|
rblaes_99
FTW Member
- Total Posts : 1951
- Reward points : 0
- Joined: 2007/02/17 06:25:20
- Status: offline
- Ribbons : 15
Re: Supported memory list?
2021/07/03 06:19:05
(permalink)
so far i have had bad luck with premium ram kits on this z590ftw.
|
neuralimplosion
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2013/11/03 15:13:26
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/07/03 07:44:01
(permalink)
I hope they publish the QVL for memory, I don't buy motherboards or memory without checking they have been tested together previously by one or both vendors. Hmm, if true and they don't, I may just skip the FTW mobo :(
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31004
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: Supported memory list?
2021/07/03 07:55:53
(permalink)
☄ Helpfulby Cool GTX 2021/10/01 10:47:02
It is a good option to ask the RAM mfg if they have tested / recommend any combination EDIThttps://forums.evga.com/FindPost/3474976 EVGATech_LeeM
Starting with our Z590 boards, we do not plan to offer a memory QVL. Nearly every kit we test within the rated specs pass (and most of the time, if it fails, it's because the RAM fails during testing). Provided your intended kit falls within the spec range listed for the board, the only limitation is usually going to be your CPU memory controller.
|
rblaes_99
FTW Member
- Total Posts : 1951
- Reward points : 0
- Joined: 2007/02/17 06:25:20
- Status: offline
- Ribbons : 15
Re: Supported memory list?
2021/07/03 08:55:58
(permalink)
Gskill only had a couple of kits tested
|
neuralimplosion
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2013/11/03 15:13:26
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/07/11 17:57:58
(permalink)
I ordered some Crucial 3600 memory they said worked with the board. We'll find out when I build the rig this week.
|
Udo_G
Superclocked Member
- Total Posts : 200
- Reward points : 0
- Joined: 2015/11/17 22:56:19
- Status: offline
- Ribbons : 3
Re: Supported memory list?
2021/07/17 01:07:51
(permalink)
Unfortunately my memory is not recognized correctly: Memory = BLM2K16G44C19U4B Specification = DDR4-4400, CL19-19-19-43 The mainboard only recognizes 4267 MHz instead of 4400 MHz (XMP 1):  In which way can I inform EVGA about this issue - via support ticket?
Attached Image(s) 
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2366
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: online
- Ribbons : 39
Re: Supported memory list?
2021/07/17 10:31:00
(permalink)
Udo_G
Unfortunately my memory is not recognized correctly:
Memory = BLM2K16G44C19U4B
Specification = DDR4-4400, CL19-19-19-43
The mainboard only recognizes 4267 MHz instead of 4400 MHz (XMP 1):
In which way can I inform EVGA about this issue - via support ticket?
Yes, I think a support ticket would be the best way to go.
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 32GB DDR5-6000 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
kalsim
New Member
- Total Posts : 92
- Reward points : 0
- Joined: 2015/06/19 22:40:11
- Status: offline
- Ribbons : 1
Re: Supported memory list?
2021/07/17 11:00:58
(permalink)
You haven't tried manually changing the memory frequency 4400?
11700K 5.0 2C / 4.9 8C | EVGA Z590 FTW 1.08 | EVGA RTX 3080Ti FTW3 Ultra | EVGA 750 G2 | 2x16GB DR G.Skill TridentZ 3600 CL16 @ 4266 CL16 Gear 2 | Samsung 980 Pro NVMe 1TB | Phanteks Evolv ATX | Alienware 34" AW3418DW
|
BIGGZxoxo
Superclocked Member
- Total Posts : 131
- Reward points : 0
- Joined: 2016/09/04 17:58:27
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/07/17 12:32:35
(permalink)
I had to manually override my memory
i9-11900k, EVGA Z590 Dark, G.Skill Ripjaws V 32GB DDR4-4000 14-15-15-35-1.55V Gear Mode Auto, WD Black SN850 500GB M.2 Gen 4x4 NVMe(OS Drive), Intel 660p 2TB NVMe (Program Drive), EVGA 3090 K|NGP|N Hybrid, EVGA Nu Audio Pro 7.1 Surround Card, EVGA SuperNOVA 1600 T2, LIAN Li O11D XL, LIAN Li UNI Fan AL120, LIAN Li Galahad AIO, EVGA Z20 RGB Optical Mechanical Gaming Keyboard, EVGA X20 Gaming Mouse, Audio-Technica ATH-MSR7b Headphones, LG 27GN950 Monitor, LG CX48 TV
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2366
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: online
- Ribbons : 39
Re: Supported memory list?
2021/07/17 13:05:07
(permalink)
I'm not suggesting they don't try that, I'm just saying it's odd that the xmp profile didn't work right for the speed setting. Might be something the folks at EVGA would like to know.
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 32GB DDR5-6000 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
Udo_G
Superclocked Member
- Total Posts : 200
- Reward points : 0
- Joined: 2015/11/17 22:56:19
- Status: offline
- Ribbons : 3
Re: Supported memory list?
2021/07/17 14:27:21
(permalink)
Of course I can change that manually, but the board should read the XMP profile normally correct.
I will open a ticket...
|
Rev00
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2021/07/16 13:58:58
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/07/18 16:07:16
(permalink)
Seems like a problem on EVGA side
|
neuralimplosion
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2013/11/03 15:13:26
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/07/26 05:57:37
(permalink)
As an update my Crucial 3600 Ballistix Ram seems to be functioning as memory correctly. However, the aRGB is a nightmare it seems, their crappy software is constantly freezing on the 32bit install, Can't run the 64bit because it says the Mobo isn't compatible. I might be on the hunt for some replacement memory with decent aRGB software. I never had issues in the past with my gskill. Should have went with one of their kits they tested on the z590 FTW
|
rblaes_99
FTW Member
- Total Posts : 1951
- Reward points : 0
- Joined: 2007/02/17 06:25:20
- Status: offline
- Ribbons : 15
Re: Supported memory list?
2021/07/26 06:29:39
(permalink)
i really with EVGAs software would pick up the RGB on the ram..... I refuse to install the gskill software so rainbow wave it is.
|
kalsim
New Member
- Total Posts : 92
- Reward points : 0
- Joined: 2015/06/19 22:40:11
- Status: offline
- Ribbons : 1
Re: Supported memory list?
2021/07/26 08:24:31
(permalink)
I haven't used it but I hear OpenRGB is good. Might want to give it a try.
11700K 5.0 2C / 4.9 8C | EVGA Z590 FTW 1.08 | EVGA RTX 3080Ti FTW3 Ultra | EVGA 750 G2 | 2x16GB DR G.Skill TridentZ 3600 CL16 @ 4266 CL16 Gear 2 | Samsung 980 Pro NVMe 1TB | Phanteks Evolv ATX | Alienware 34" AW3418DW
|
BIGGZxoxo
Superclocked Member
- Total Posts : 131
- Reward points : 0
- Joined: 2016/09/04 17:58:27
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/07/26 15:06:01
(permalink)
Udo_G
Of course I can change that manually, but the board should read the XMP profile normally correct.
I will open a ticket...
did EVGA get back to you about it? I didn't bother opening up a ticket and just did it myself. I'm sure an updated bios is in the works to have the memory to run on what it is intended to be with XMP 1 or 2
i9-11900k, EVGA Z590 Dark, G.Skill Ripjaws V 32GB DDR4-4000 14-15-15-35-1.55V Gear Mode Auto, WD Black SN850 500GB M.2 Gen 4x4 NVMe(OS Drive), Intel 660p 2TB NVMe (Program Drive), EVGA 3090 K|NGP|N Hybrid, EVGA Nu Audio Pro 7.1 Surround Card, EVGA SuperNOVA 1600 T2, LIAN Li O11D XL, LIAN Li UNI Fan AL120, LIAN Li Galahad AIO, EVGA Z20 RGB Optical Mechanical Gaming Keyboard, EVGA X20 Gaming Mouse, Audio-Technica ATH-MSR7b Headphones, LG 27GN950 Monitor, LG CX48 TV
|
BIGGZxoxo
Superclocked Member
- Total Posts : 131
- Reward points : 0
- Joined: 2016/09/04 17:58:27
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/07/31 22:50:49
(permalink)
Nike_7688
Udo_G
Unfortunately my memory is not recognized correctly:
Memory = BLM2K16G44C19U4B
Specification = DDR4-4400, CL19-19-19-43
The mainboard only recognizes 4267 MHz instead of 4400 MHz (XMP 1):
In which way can I inform EVGA about this issue - via support ticket?
Yes, I think a support ticket would be the best way to go.
on the site it is listed at 43 but if you look on the memory stick it might say 46 on it. It’s very misleading
i9-11900k, EVGA Z590 Dark, G.Skill Ripjaws V 32GB DDR4-4000 14-15-15-35-1.55V Gear Mode Auto, WD Black SN850 500GB M.2 Gen 4x4 NVMe(OS Drive), Intel 660p 2TB NVMe (Program Drive), EVGA 3090 K|NGP|N Hybrid, EVGA Nu Audio Pro 7.1 Surround Card, EVGA SuperNOVA 1600 T2, LIAN Li O11D XL, LIAN Li UNI Fan AL120, LIAN Li Galahad AIO, EVGA Z20 RGB Optical Mechanical Gaming Keyboard, EVGA X20 Gaming Mouse, Audio-Technica ATH-MSR7b Headphones, LG 27GN950 Monitor, LG CX48 TV
|
rblaes_99
FTW Member
- Total Posts : 1951
- Reward points : 0
- Joined: 2007/02/17 06:25:20
- Status: offline
- Ribbons : 15
Re: Supported memory list?
2021/08/05 05:58:58
(permalink)
I had to RMA my 5333 kits..... so snagged a set of these
F4-4800C20D-32GTEG
popped them in the dark, set XMP profile and it fired right up perfectly.
|
BadgerPelt
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2009/03/31 15:04:42
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/08/05 06:23:43
(permalink)
rblaes_99
I had to RMA my 5333 kits..... so snagged a set of these
F4-4800C20D-32GTEG
popped them in the dark, set XMP profile and it fired right up perfectly.
I just sent back the same 5333 kit, but I ordered F4-4800C20D-32GTRG
|
rblaes_99
FTW Member
- Total Posts : 1951
- Reward points : 0
- Joined: 2007/02/17 06:25:20
- Status: offline
- Ribbons : 15
Re: Supported memory list?
2021/08/05 07:25:36
(permalink)
Gskill RMA'd all 4 sticks of the 5333 stuff no questions asked. I actually sent two sticks to Nereus who had a FTW and DARK (like me) and he had the same exact issues. would only run at JDEC 2133 speeds.....
GSKILL knew they sent junk out on the first batch for sure!
|
wmmills
CLASSIFIED ULTRA Member
- Total Posts : 5679
- Reward points : 0
- Joined: 2006/01/04 20:47:29
- Location: New Jersey
- Status: offline
- Ribbons : 40
Re: Supported memory list?
2021/08/05 09:08:01
(permalink)
rblaes_99
Gskill RMA'd all 4 sticks of the 5333 stuff no questions asked. I actually sent two sticks to Nereus who had a FTW and DARK (like me) and he had the same exact issues. would only run at JDEC 2133 speeds.....
GSKILL knew they sent junk out on the first batch for sure!
Not necessarily, that they sent junk, but being thats a really high speed set of sticks they probably knew that they would be problematic way sooner than normal, would be my guess. Why send junk out if you know its coming back and gonna cost you more money? AND p-off your consumer? G-skills customer service is very good though, so thats no surprise there.
MOBO: EVGA x299 Dark, CPU: I9 10900X, RAM: Patriot Viper RGB 3600 32gb, SSD: Samsung 860 EVO 1TB, M2: Samsung 970 EVO+ 1TB, PSU: CoolerMaster M2 1500, CPU HSF: EVGA 240 CLC HSF~ P/P EK Furious Vardar, G-CARD:EVGA RTX3090 FTW3 Ultra Gaming w/Hybrid kit and Noctua IPPC 3000 P/P, CASE: LIAN-LI PC-V2010B w/ Window mod, OS: Windows 10 Pro 64bit, MON: Alienware AW3821DW  New EVGA product? Register it NOW with this link: http://www.evga.com/register/default.asp?affiliatecode=4QFQRAMOII Help Our Vets From K-2! [link=https://strongholdfreedom
|
Nereus
Captain Goodvibes
- Total Posts : 18926
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: Supported memory list?
2021/08/09 12:39:48
(permalink)
My Corsair Dominator Platinum 4000GHz ram (2x16BG) wont post on XMP settings on the Z590 Dark. This is the same ram I've had for a while that had zero issues posting on the Z490 Dark and an ASUS Z390 prior to that. Tried bumping the voltage up, tried putting the timings on auto and just setting the clock at 4000MHz, but nope, reset cmos required every time. I finally got them to post at 3600MHz with everything else on auto. I'm still trying a few things, I'll try gear 2 again, but this is getting really frustrating, and this is after having to return some 5333MHz memory that would not post over 2133MHz as rblaes_99 posted above. Kind of wish we could just disable this gear setting and go back to how it worked previously. BIOS 1.04.
post edited by Nereus - 2021/08/09 12:43:41
|
rblaes_99
FTW Member
- Total Posts : 1951
- Reward points : 0
- Joined: 2007/02/17 06:25:20
- Status: offline
- Ribbons : 15
Re: Supported memory list?
2021/08/10 08:08:54
(permalink)
i hate this gear business with the ram. I also hate EVGA not publishing a QVL for RAM. I have 10 sticks of premium DDR4 (tagged as compatible with Z590) sitting here and this is getting crazy.
|
Hoggle
EVGA Forum Moderator
- Total Posts : 10102
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: Supported memory list?
2021/08/10 08:32:18
(permalink)
Luckily the board is new so bios updates could come out fairly often. I would contact support if you run into any RAM issues since they could be fixed.
|
Nereus
Captain Goodvibes
- Total Posts : 18926
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: Supported memory list?
2021/08/10 09:41:32
(permalink)
|
RealKVX
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2020/05/14 14:29:08
- Status: offline
- Ribbons : 0
Re: Supported memory list?
2021/08/10 12:03:30
(permalink)
The two kits I have and tested with the Z590 FTW are..
KIT 1:
Thermaltake XG 4400Mhz / PN: R016D408GX2-4400C19A
Modules: Hynix DJR
Tested with 4 Sticks, XMP Fails to boot and only boots if I change the XMP speed to 3600Mhz. Anything over 3600Mhz is a no go.
KIT 2:
Patriot Viper RGB 4133Mhz / PN: PE000585-PVR416G413C9K
Modules: Samsung B-Die
Tested with 4 Sticks, XMP loads successfully on both profiles.
Profile 1: 4133Mhz & Profile 2: 4000Mhz. No BSODs or crashes as of yet.
PC Specs:
BIOS Version: 1.06
CPU: 10900KF
GPU: 2080 Ti XC ULTRA
|
Nereus
Captain Goodvibes
- Total Posts : 18926
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: Supported memory list?
2021/08/10 12:28:32
(permalink)
RealKVX
The two kits I have and tested with the Z590 FTW are..
*snip*
Good idea, very helpful for people considering their options. Here's mine so far, I have more on the way from Newegg. Z590 Dark, BIOS 1.04, i9-11900K, 3090 FTW3 Ultra, all water cooled. Corsair Dominator Platinum RGB 4000MHz 2x16GB, P/N: CMT32GX4M2K4000C19 Modules: Samsung B-Die Tested with 2 sticks in Z590 Dark, XMP Fails to boot in Gear 2 (or Gear 1) and only boots if clock dropped to 3600Mhz (is ok on Gear 1 @ 3600MHz). Anything over 3600Mhz is a no go, despite multiple attempts with raised voltage, VCCIO_Aux, and checked VSA was between 1.25 and 1.3V. The same set of ram had no problem working at XMP on EVGA Z490 Dark KP. G.Skill Trident Z Royal Elite 5333MHz 2x8GB P/N: F4-5333C22D-16GTEG Modules: unsure, already returned. rblaes_99 might know. Tested with 2 sticks on Z590 Dark. Could not post at all above 2133MHz... rblaes_99 has sent this set and his set back under RMA. G.Skill Trident Z Royal Elite 4800MHz 2x16GB P/N: F4-4800C20D-32GTES Modules: Hynix Tested with 2 sticks on Z590 Dark. Loaded XMP defaults and Gear 2, saved and rebooted, posted no problem at all. Thanks rblaes_99 for the help. ..currently waiting on some G.Skill Trident Z Royal Elite 4800MHz 2x16GB, p/n F4-4800C20D-32GTES. rblaes_99 already has this model and has been able to post at XMP settings (Gear 2) without issue on the Z590 Dark.
post edited by Nereus - 2021/08/12 16:59:11
|