talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/02/28 07:52:40
(permalink)
Shraf2k
talon951
No forcing it on. It's good for 200-300 pts.
ohhhh thats in time spy. does it also juice up TSE? nice runs btw! I think you're in the top 3 for non sub ambient.
It increases the graphics score in both TS and PR, but not in TSE for whatever reason. With TS though, it will hurt your CPU score, so if you are going for overall score, need to run both ways. My 3900x machine with the 3080TI scores the highest combined score in TS with reBar off, but my 5800x machine with a 3090 is the opposite.
|
talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/02/28 08:01:54
(permalink)
03whitegsr
I'm not familiar enough with how it reports to know what ya mean? I assumed 3D mark takes the reported clock speed chart that it has and then averages all that data to create the average clock?
By "Forcing on Rebar" is there something else I need to do besides just having the MB settings right and turning it on in PX1?
Not going to lie, I'm just in the lazy man OC realm where I get it as much cold air as possible, turn the offsets and power limits as high as is stable and see where it ends up. About the only thing I do beyond that is capping the frequency so it avoids spiking the frequency too high at load transitions. Doing this was enough to put me in the top 1% on 3080Ti list but haven't been able to break top 100. Of course, top 100 is really like 5 people with 18 different scores and then maybe 10 others that only submit their highest, different topic though.
Well you have understand how GPU boost works. Even when you see a steady voltage/frequency displayed, it is still bouncing between some of the points to the left of the display/reported VF point. That's what the effective clock is showing in HWINFO. This pertains to CPUs but it's similar for GPUs, https://www.hwinfo.com/fo...t-discrete-clock.5958/Yes, you have to force reBar with NVIDIA Profile Inspector. https://wccftech.com/here...-via-nvidia-inspector/I clean up some of my runs. I'll have to look, is there a setting to keep it from auto uploading? I hate it that there are so many repeats too, but it's painful with their interface to clean them all up. And I managed to delete my personal best PR score with the stock EVGA bios too. Grrr...
|
03whitegsr
Superclocked Member
- Total Posts : 160
- Reward points : 0
- Joined: 2021/01/10 20:11:36
- Status: offline
- Ribbons : 1
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/02/28 14:58:33
(permalink)
Thanks for the info. Part of me wants to eek out every last point I can get. Then I'd have to use the Galax Bios though and I'm not sure a bench mark score is really worth the risk. Although, seeing like 21fps in cyberpunk with 4K ultra ray tracing at 420W was a little disheartening... An extra 200W might get it up to 23fps. Lol
Yeah, there is a setting you can shut off the auto display in the rankings. The runs still get saved in your results but you have to go in and set that run to be displayed in the rankings.
|
talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/02/28 15:06:30
(permalink)
I tend to be drawn to anything competitive so not shocking I've wasted a lot of time on it.
Thanks I'll try to remember to change it on my account.
|
Governator
CLASSIFIED Member
- Total Posts : 3103
- Reward points : 0
- Joined: 2008/02/04 13:29:47
- Location: Bozeman, MT
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/03 07:35:21
(permalink)
Just now stumbling into this thread, I'm on water and I'm able to run without errors @ +1500 mem (22004 MHz effective), +150 core (2130 MHz), +3 mV https://www.3dmark.com/spy/27349189  avg GPU temp 43C I'd love to hear from others affirming their water results, thanks to all.... Specs: Asus Z690 Extreme (BIOS 1403) Intel i9 12900K 32G G.Skill DDR5 5600 CL36 EVGA 3080 Ti FTW3 Ultra All EK Water cooled
post edited by Governator - 2022/04/03 07:52:00
HEATWARE Mobo: Asus Z690 Maximus Extreme (BIOS 2103) | CPU: Intel Alder Lake i9-13900K (@6.2Ghz) w/EK-Quantum Velocity² D-RGB Nickel + Acetal | GPU: Evga 3080Ti FTW3 Ultra w/EKWB Quantum Vector | RAM: 64GB DDR5 (2x32GB) Kingston Fury Beast KF556C40BBK2-64 @XMP2 | SSD: 2x WD SN850 2TB NVMe (m.2_2, m.2_3) | Power Supply: EVGA SuperNOVA 1600 P2 | Cooling: Dual Loop 2x EK-Quantum Kinetic TBE 300 D5 PWM D-RGB - Plexi / HWL 420GTS/Corsair XR5 420 Rads | Case: Corsair 7000D Airflow | OS: Microsoft Windows 11 Pro 64 Bit | Monitor: ROG Strix XG438Q | KB: CORSAIR K100 RGB Optical-Mechanical | Sound: Onboard Realtek via SPDIF (Logitech Z625 THX)
|
Shraf2k
Superclocked Member
- Total Posts : 154
- Reward points : 0
- Joined: 2021/07/12 20:27:18
- Status: offline
- Ribbons : 1
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/03 07:36:18
(permalink)
Hybrid, but the same if not higher.
|
Governator
CLASSIFIED Member
- Total Posts : 3103
- Reward points : 0
- Joined: 2008/02/04 13:29:47
- Location: Bozeman, MT
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/03 07:38:11
(permalink)
Shraf2k
Hybrid, but the same if not higher.
Thanks, I could probably push core higher but will hold for now, I'm not really into overclocking hugely but wanted to have a bit of fun on water. Update: welp it does appear in my tests and from reading here that 2145 boost seems to be the ceiling where I crash early into Time Spy, tried a few modest bumps in voltage but still dumps early, I'm pretty satisfied with clocks that mirror the 3090 Ti. Interesting to note, base boost on these cards are set at 1800 but with boost lock I'm @ 1965, +165 over base but likely due to my being set on the card's OC BIOS position, thus I've dropped down for sake of stability to +1000 mem (21004 MHz Effective), +75 core (2040 MHz) to reflect what a 3090 Ti might be on an OC BIOS without knowing exact numbers, current scores below: Time Spy (20.9K) Port Royal (14K) Time Spy Stress Test (99.4%, Mem +1250, Core +105) will test shortly with BF 2042 among others.
post edited by Governator - 2022/04/03 09:35:51
HEATWARE Mobo: Asus Z690 Maximus Extreme (BIOS 2103) | CPU: Intel Alder Lake i9-13900K (@6.2Ghz) w/EK-Quantum Velocity² D-RGB Nickel + Acetal | GPU: Evga 3080Ti FTW3 Ultra w/EKWB Quantum Vector | RAM: 64GB DDR5 (2x32GB) Kingston Fury Beast KF556C40BBK2-64 @XMP2 | SSD: 2x WD SN850 2TB NVMe (m.2_2, m.2_3) | Power Supply: EVGA SuperNOVA 1600 P2 | Cooling: Dual Loop 2x EK-Quantum Kinetic TBE 300 D5 PWM D-RGB - Plexi / HWL 420GTS/Corsair XR5 420 Rads | Case: Corsair 7000D Airflow | OS: Microsoft Windows 11 Pro 64 Bit | Monitor: ROG Strix XG438Q | KB: CORSAIR K100 RGB Optical-Mechanical | Sound: Onboard Realtek via SPDIF (Logitech Z625 THX)
|
rjbarker
CLASSIFIED Member
- Total Posts : 3214
- Reward points : 0
- Joined: 2008/03/20 10:07:05
- Location: Vancouver Isle - Westcoast Canada
- Status: offline
- Ribbons : 21
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/04 03:27:36
(permalink)
I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3 EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i / Corsair 900D & XSPC 480 * 360 * 240 Rads XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
|
Governator
CLASSIFIED Member
- Total Posts : 3103
- Reward points : 0
- Joined: 2008/02/04 13:29:47
- Location: Bozeman, MT
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/04 11:58:12
(permalink)
rjbarker
Here you go TS 22110
3080Ti n 12900K w Asus Apex Dominator 6000 C32
https://www.3dmark.com/spy/25792603
 I'm currently rock solid at +1250/+120 Mem/Core (21504 MHz Effective/ 2085 MHz) and can play BF 2042 for hours and also fetch 14.3K+ on Port Royal, I'm pretty happy with this for now and you and I both have nearly identical specs save for my Z690 Extreme/12900K, G.Skill 5600 CL36 neither of which are overclocked.
post edited by Governator - 2022/04/04 12:04:08
HEATWARE Mobo: Asus Z690 Maximus Extreme (BIOS 2103) | CPU: Intel Alder Lake i9-13900K (@6.2Ghz) w/EK-Quantum Velocity² D-RGB Nickel + Acetal | GPU: Evga 3080Ti FTW3 Ultra w/EKWB Quantum Vector | RAM: 64GB DDR5 (2x32GB) Kingston Fury Beast KF556C40BBK2-64 @XMP2 | SSD: 2x WD SN850 2TB NVMe (m.2_2, m.2_3) | Power Supply: EVGA SuperNOVA 1600 P2 | Cooling: Dual Loop 2x EK-Quantum Kinetic TBE 300 D5 PWM D-RGB - Plexi / HWL 420GTS/Corsair XR5 420 Rads | Case: Corsair 7000D Airflow | OS: Microsoft Windows 11 Pro 64 Bit | Monitor: ROG Strix XG438Q | KB: CORSAIR K100 RGB Optical-Mechanical | Sound: Onboard Realtek via SPDIF (Logitech Z625 THX)
|
rjbarker
CLASSIFIED Member
- Total Posts : 3214
- Reward points : 0
- Joined: 2008/03/20 10:07:05
- Location: Vancouver Isle - Westcoast Canada
- Status: offline
- Ribbons : 21
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/05 02:32:43
(permalink)
Governator
rjbarker
Here you go TS 22110
3080Ti n 12900K w Asus Apex Dominator 6000 C32
https://www.3dmark.com/spy/25792603
I'm currently rock solid at +1250/+120 Mem/Core (21504 MHz Effective/ 2085 MHz) and can play BF 2042 for hours and also fetch 14.3K+ on Port Royal, I'm pretty happy with this for now and you and I both have nearly identical specs save for my Z690 Extreme/12900K, G.Skill 5600 CL36 neither of which are overclocked.
That 12900k and Extreme Board are screaming for a "little" OC ;) My best PR score so far....pretty much the same settings as TS Score https://www.3dmark.com/pr/1411187
I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3 EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i / Corsair 900D & XSPC 480 * 360 * 240 Rads XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/05 17:22:37
(permalink)
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
rjbarker
CLASSIFIED Member
- Total Posts : 3214
- Reward points : 0
- Joined: 2008/03/20 10:07:05
- Location: Vancouver Isle - Westcoast Canada
- Status: offline
- Ribbons : 21
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/06 01:20:28
(permalink)
HeavyHemi
Gained almost 800 points in Port Royal with a bit of undervolting
Clocks started at 2025 @ 1.018v dropped a few C in temp as well. Stock was boosting to around 1935 @ 1.09v. Man they sure do volt the cards high for yield.
13815
https://www.3dmark.com/pr/1509176
https://www.3dmark.com/pr/1516393
I have found it really is all about running the Card as cool as possible to ensure consistent highest boost.....that first run first thing in the AM .....3080Ti really is a great beastly Card....!! The 800 pt gain is impressive!!!
I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3 EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i / Corsair 900D & XSPC 480 * 360 * 240 Rads XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/04/06 15:13:56
(permalink)
rjbarker
HeavyHemi
Gained almost 800 points in Port Royal with a bit of undervolting
Clocks started at 2025 @ 1.018v dropped a few C in temp as well. Stock was boosting to around 1935 @ 1.09v. Man they sure do volt the cards high for yield.
13815
https://www.3dmark.com/pr/1509176
https://www.3dmark.com/pr/1516393
I have found it really is all about running the Card as cool as possible to ensure consistent highest boost.....that first run first thing in the AM .....3080Ti really is a great beastly Card....!!
The 800 pt gain is impressive!!!
It's almost exactly the same as my 1080Ti. In my experience when you can both run a higher clock +145, and significantly lower the voltage, your GPU should last a good long time. I've not even pushed it enough to crash yet. Not sure if I am going to hybrid this one or not. It's really quiet. Someone must of had their morning java. Memory and PWM temps stay below 70C even under load. Figured I'd just edit this one. https://www.3dmark.com/spy/27445391Within a whisker of 8K. Still undervolting. 2010@ 1.006
post edited by HeavyHemi - 2022/04/08 01:02:09
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/07 13:27:08
(permalink)
|
bzabrown419
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/10/13 11:31:36
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 10:04:38
(permalink)
Ok what am I doing wrong? I can't seem to break 15k in PR. I'm sure if I did the force ReBar technique I could get it but I just want to do it the same way I did my previous best. I always seem to crash at these settings right at the end of the benchmark. Are the temps just too high? Or should I increase voltage? I noticed at higher voltage I reach higher clocks but get a lower score. I'm doing it in my house with 70-72F ambient temps. Previous best on "winter" air: 14483 https://www.3dmark.com/3dm/71848504 Current best watercooled: 14950 https://www.3dmark.com/pr/1575348 
|
kraade
CLASSIFIED Member
- Total Posts : 2363
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 11:29:08
(permalink)
3080 ti probably won't get there until you get the clock up to about 2160, not sure if you're going to do that at your temp.
|
talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 11:45:11
(permalink)
bzabrown419
Ok what am I doing wrong? I can't seem to break 15k in PR. I'm sure if I did the force ReBar technique I could get it but I just want to do it the same way I did my previous best. I always seem to crash at these settings right at the end of the benchmark. Are the temps just too high? Or should I increase voltage? I noticed at higher voltage I reach higher clocks but get a lower score. I'm doing it in my house with 70-72F ambient temps.
Previous best on "winter" air: 14483
https://www.3dmark.com/3dm/71848504
Current best watercooled: 14950
https://www.3dmark.com/pr/1575348
I get the best stock bios score from limiting the curve around 1018 mv. PR doesn't go higher than that much if any of the run, but it seems to allow me to go one more bin sometimes (15mhz) probably due to the card very briefly jumping higher under lower load. But kraade is probably right, you're about at the limit of the stock bios at that temp without doing some of the tweaks like forcing reBar. What settings did you use to get the 14950 score? I posted the curves I've used here for reference, https://www.overclock.net...page-116#post-28985610
|
bzabrown419
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/10/13 11:31:36
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 12:50:01
(permalink)
I tried to post Screenshot of Afterburner using Imgur but I guess it didn't work. 113% PL, +195 Core, +1500 mem capped at 1.025v. It crashes towards the end when the lady is exiting the spacecraft :( Perhaps a few degrees cooler and I can get through the entire thing.
post edited by bzabrown419 - 2022/05/17 13:07:30
|
talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 14:33:17
(permalink)
+195 is all my card can complete. The only VF curve change that can buy any more stability is the one I linked to above that I used for the Galax bios. But that really only works when you can lock the voltage (no power limit).
|
bzabrown419
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/10/13 11:31:36
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 15:59:05
(permalink)
Yeah I was basically running your same curve except I had the cutoff @ 1.025v. When I go to +210 though it crashes at the end of the benchmark. Ill just have to wait for a chilly morning or evening and see if I can drop a few degrees. When looking at those who got 15k+ with my same setup, they all have lower average temps. My delta between ambient and water temp seems to be 5-7 degrees under sustained load. What is considered a good delta between water temp and max gpu temp?
|
bzabrown419
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/10/13 11:31:36
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 16:23:33
(permalink)
Anyways, thanks for you help Talon. I'll continue messing around and hopefully Crack that 15k one day. This is my first water cooled build so it's fun just messing around. Overall, super happy.
|
kraade
CLASSIFIED Member
- Total Posts : 2363
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 16:47:15
(permalink)
I use PR mostly for a standard so I can look at gains or losses in comparison to other configurations, if you are interested in the last few FPS , I think Paul of Paul's hardware on youtube goes over a bunch of the side things you can do to improve your score, along with the 2 other in the RIP GN RIP Jays2cents Rip Paul series.
|
talon951
FTW Member
- Total Posts : 1026
- Reward points : 0
- Joined: 2020/10/06 02:41:19
- Status: offline
- Ribbons : 3
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 16:47:38
(permalink)
NP. I was going to say, only need to drop another 5C to crack 15k. Just crank down the A/C or run a duct from a vent.
Which block do you have? My Heatkiller V is around 10-12C block delta (water to core) at 450w. I give a range because it will vary depending on where the power is going (mem vs. core mostly). 38C average is good, so I doubt you're leaving much there.
|
bzabrown419
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/10/13 11:31:36
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 17:47:44
(permalink)
Thanks Kraade I will check them out!
|
bzabrown419
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/10/13 11:31:36
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 17:52:50
(permalink)
Optimus block. My experience with them was super good. I ordered the cpu and gpu blocks on March 19th 2022 and received them both by April 26th. Probably paid too much but I really like the look and performance. It was a toss up between Optimus and Heatkiller. I just went with Optimus because they're US based and I preferred the look of the cpu block more.
|
kraade
CLASSIFIED Member
- Total Posts : 2363
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/17 18:21:42
(permalink)
|
bzabrown419
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/10/13 11:31:36
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/05/18 07:19:26
(permalink)
Very nice! You make it look so effortless with those clocks. Lol. Great temps for air too.
|
ryoohki360
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2018/02/09 19:50:07
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/07/17 05:22:47
(permalink)
The max stable in game i can get is +1300mhz memory and +150mhz core, this is with a heatkiller installed
|
bzabrown419
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/10/13 11:31:36
- Status: offline
- Ribbons : 0
Re: 3080 Ti FTW3 Ultra Overclocking Results
2022/07/17 08:47:30
(permalink)
Sweet. That's a good result. Those Heatkiller blocks are gorgeous and I can't wait to see what 40 series blocks look like.
|