domingo_x
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/10/26 12:10:51
- Status: offline
- Ribbons : 0
This is the new version that just rolled out. With 1.1.8.0, everything worked just fine and Re-BAR was enabled on my 3090 FTW. However with this new version it tells me "Please check with your motherboard vendor" in the last box, with a little caution symbol. It says Re-Bar is disable as a result. All of the other boxes (card, driver, Windows version, etc.) appear with green checks and are good to go.
My motherboard is an MSI X570 Tomahawk, which worked fine previously. Going back to 1.1.8.0 and it works once again. Re-BAR is listed as enabled in my motherboard BIOS, which has not changed.
Did something change in 1.1.9.0 or is this just a bug of some sort?
|
chumop
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2021/03/03 10:46:02
- Status: offline
- Ribbons : 2
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/08 14:37:12
(permalink)
☼ Best Answerby domingo_x 2021/04/08 14:40:33
domingo_x
This is the new version that just rolled out. With 1.1.8.0, everything worked just fine and Re-BAR was enabled on my 3090 FTW. However with this new version it tells me "Please check with your motherboard vendor" in the last box, with a little caution symbol. It says Re-Bar is disable as a result. All of the other boxes (card, driver, Windows version, etc.) appear with green checks and are good to go.
My motherboard is an MSI X570 Tomahawk, which worked fine previously. Going back to 1.1.8.0 and it works once again. Re-BAR is listed as enabled in my motherboard BIOS, which has not changed.
Did something change in 1.1.9.0 or is this just a bug of some sort?
Did you check if Re-Bar is enabled in your Nvidia Control Panel or GPU-Z? I have the same issue of PX1 showing that it is disabled but it certainly is enabled on my system. You don't have to worry if it says "enabled" in your control panel or GPU-Z.
|
domingo_x
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/10/26 12:10:51
- Status: offline
- Ribbons : 0
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/08 14:41:35
(permalink)
chumop
Did you check if Re-Bar is enabled in your Nvidia Control Panel or GPU-Z? I have the same issue of PX1 showing that it is disabled but it certainly is enabled on my system. You don't have to worry if it says "enabled" in your control panel or GPU-Z.
Looks like it IS still enabled per both, so I guess it's just a bug/issue with PX1.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/08 16:22:09
(permalink)
Just updated my 3090 FTW3 Ultra with this latest PX1. I also got a firmware update? Mine still shows re-bar enabled and all ok. It would be nice if EVGA provided a thread on this updated PX1 and what it was about.
post edited by d.burnette - 2021/04/08 16:24:15
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Madrok
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2020/09/08 13:30:55
- Status: offline
- Ribbons : 0
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/09 03:01:51
(permalink)
d.burnette
Just updated my 3090 FTW3 Ultra with this latest PX1.
I also got a firmware update?
Mine still shows re-bar enabled and all ok.
It would be nice if EVGA provided a thread on this updated PX1 and what it was about.
Yeah, I was wondering what the GPU firmware update was for too (not a bios update).
|
DaBogo
New Member
- Total Posts : 69
- Reward points : 0
- Joined: 2020/07/24 02:31:12
- Location: Switzerland
- Status: offline
- Ribbons : 0
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/10 02:27:11
(permalink)
Hi there, i confirm i have the same issue with 1.1.9.0. With 1.1.8.0 re-size bar all fields were checked green and after update on the latest version the re-size bar now shows desabled on latest field but also x1 not starting up with windows and is giving me an error message. See the screenshot below:
Attached Image(s)
|
AstroCat
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 2007/07/19 15:39:16
- Status: offline
- Ribbons : 1
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/10 07:18:43
(permalink)
Same issue. With 1.1.8.0 re-size bar all fields were checked green, 1.1.9.0 it says disabled.
Even though NCP still says YES.
i7-10700K /Asus ROG Maximus XII Hero/EVGA RTX 3080 Ti FTW3 ULTRA/G.SKILL 32GB Ripjaws V DR4 3200MHz/Fractal Design Define R5/EVGA SuperNOVA 850 G3/LG 32GK850G 31.5"/BenQ G2400W 24"/Sound Blaster ZX/2x Samsung 970 EVO Plus 500GB, 2TB/Saitek X52 Pro/TrackIR5 - TrackClip Pro/Win10 Pro 64bit
|
DaBogo
New Member
- Total Posts : 69
- Reward points : 0
- Joined: 2020/07/24 02:31:12
- Location: Switzerland
- Status: offline
- Ribbons : 0
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/11 04:37:44
(permalink)
Thanks for that feedback. I did not wrote nothing about my setup but at least we have total different setups. i'm running asus dark hero with ryzen 7 5800x and win 10 home and 3070 EVGA FTW3 Ultra. all latest updates done. nothing else running in background, all background apps are off - pc running like a charm otherwize. I believe it has to do something with the X1 software. Because on 1.1.8.0 we had the issue that as soon i switched tabs i always saw "apply" button active even i was not changing anything. in 1.1.9.0 this appears to be fixed but there is another issue now. i will stay with 1.1.8.0 until we have more information about.
|
HoserSupreme
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2021/04/12 15:49:17
- Status: offline
- Ribbons : 0
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/12 15:57:14
(permalink)
DaBogo
Thanks for that feedback. I did not wrote nothing about my setup but at least we have total different setups. i'm running asus dark hero with ryzen 7 5800x and win 10 home and 3070 EVGA FTW3 Ultra. all latest updates done. nothing else running in background, all background apps are off - pc running like a charm otherwize. I believe it has to do something with the X1 software. Because on 1.1.8.0 we had the issue that as soon i switched tabs i always saw "apply" button active even i was not changing anything. in 1.1.9.0 this appears to be fixed but there is another issue now. i will stay with 1.1.8.0 until we have more information about.
I'm running a 3090 FTW 3 Ultra with Driver Version 465.89 (latest), vbios version 94.02.42.80.AD, Firmware version 2.01.21 (latest everything) and Precision X1 version 1.1.9.0 + an ASUS ROG STRIX-E GAMING motherboard with the newest firmware (the one they released to provide resizable bar support recently), went through all the trouble of swapping over to UEFI, Disabling CSM, setting "Above 4G Decoding" to Enabled, and setting "Re-Size BAR support" to "Auto" in my BIOS settings, but I'm still getting the "Please check with your motherboard vendor" error. Is there a fix for this, as it looks like something is wrong in Precision X1, considering that every single other step, setting, and property is set and/or displaying correctly for me - nothing should be preventing me from being able to turn this on in Precision X1
|
dl_unlimited
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2009/07/15 05:06:33
- Status: offline
- Ribbons : 0
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/13 23:31:28
(permalink)
Perhaps a 3090 issue as I have 1.1.9 and a Strix-F board and they are all checked?
|
DaBogo
New Member
- Total Posts : 69
- Reward points : 0
- Joined: 2020/07/24 02:31:12
- Location: Switzerland
- Status: offline
- Ribbons : 0
Re: Precision X1 1.1.9.0 Re-BAR no longer supported on MoBo?
2021/04/14 12:13:46
(permalink)
HoserSupreme
I'm running a 3090 FTW 3 Ultra with Driver Version 465.89 (latest), vbios version 94.02.42.80.AD, Firmware version 2.01.21 (latest everything) and Precision X1 version 1.1.9.0 + an ASUS ROG STRIX-E GAMING motherboard with the newest firmware (the one they released to provide resizable bar support recently), went through all the trouble of swapping over to UEFI, Disabling CSM, setting "Above 4G Decoding" to Enabled, and setting "Re-Size BAR support" to "Auto" in my BIOS settings, but I'm still getting the "Please check with your motherboard vendor" error.
Is there a fix for this, as it looks like something is wrong in Precision X1, considering that every single other step, setting, and property is set and/or displaying correctly for me - nothing should be preventing me from being able to turn this on in Precision X1
I managed to get it to work. I installed DDU from guru3D, cleaned everything but really everything including my display drivers. Then i downloaded the latest invidia driver (the previous one but i repeated this with the latest which has been released around 5hours ago). After downloading the newest driver i will install i deactivate my ethernet adapter to have no connection and run DDU. After reboot i first install my driver and after that i install px1 and look at the screenshot now compared to what we had just before (different setups but same issue)
Attached Image(s)
|