EVGA

Helpful Reply2 separate cables or 1 dual cable for graphics card

Author
Post
Essentials Only Full Version
starfire82
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2013/10/28 21:34:10
  • Status: offline
  • Ribbons : 0
2020/12/26 23:51:27 (permalink)
My question is, I have a 1000w EVGA PSU, and each VGA cable is split into 2 8pin connectors, when connecting to a graphics card that requires 2 8pin, do I use 1 of these cables that splits into 2 8pin, OR use 1 of the 8pins from 2 separate cables.

I've seen lots of people build systems with separate VGA cables lately, avoiding using the split second connector found on each cable. Is there a limit of power per cable, or is there a more stable flow with 2 separate connectors?

Attached Image(s)

#1
List Solutions Only

2 Replies Related Threads
    Hoggle
    EVGA Forum Moderator
    • Total Posts : 10102
    • Reward points : 0
    • Joined: 2003/10/13 22:10:45
    • Location: Eugene, OR
    • Status: offline
    • Ribbons : 4
    Re: 2 separate cables or 1 dual cable for graphics card 2020/12/27 02:48:52 (permalink) ☄ Helpfulby starfire82 2020/12/27 04:18:43
    It’s better to use two cables as the voltage should be better controlled that way. I would only use a single cable if it’s the only option since it will work but won’t be ideal.

    Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
     
     
    #2
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 102291
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Netherlands
    • Status: offline
    • Ribbons : 84
    Re: 2 separate cables or 1 dual cable for graphics card 2020/12/27 03:36:52 (permalink)
    Hoggle
    It’s better to use two cables as the voltage should be better controlled that way. I would only use a single cable if it’s the only option since it will work but won’t be ideal.

    If the 1000 watt PSU has a single rail voltage output then it won't matter if you have one or two cables. If you are not sure then use two cables as Hoggle has suggested. 

    AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #3
    Jump to:
  • Back to Mobile