EVGA

How do i enable U.2 port on X299 Dark?

Author
Post
Essentials Only Full Version
Bali2010
New Member
  • Total Posts : 25
  • Reward points : 0
  • Joined: 2018/08/16 16:04:15
  • Status: offline
  • Ribbons : 0
2020/11/19 12:51:22 (permalink)
Hey guys. I just bought a 6TB SAS HDD and the cable for it. When i plug in it does not wok and leds arent light up at U.2 ports.
How do i enable these ports?
#1

7 Replies Related Threads
    EVGA_Lee
    Moderator
    • Total Posts : 4247
    • Reward points : 0
    • Joined: 2016/11/04 14:43:35
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 14
    Re: How do i enable U.2 port on X299 Dark? 2020/11/19 13:43:49 (permalink)
    Go into the motherboard BIOS, go into the Advanced Menu, then go into the Onboard Device Menu.  You will need to enable the correct U.2 port, then save and reboot.
    #2
    Bali2010
    New Member
    • Total Posts : 25
    • Reward points : 0
    • Joined: 2018/08/16 16:04:15
    • Status: offline
    • Ribbons : 0
    Re: How do i enable U.2 port on X299 Dark? 2020/11/19 14:08:48 (permalink)
    Thank you very much i found it. But when i turn on the computer the u.2 light turned off and do not recognize the hdd. Why? In the bios it lighted up but not in the windows...
    #3
    EVGA_Lee
    Moderator
    • Total Posts : 4247
    • Reward points : 0
    • Joined: 2016/11/04 14:43:35
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 14
    Re: How do i enable U.2 port on X299 Dark? 2020/11/19 14:12:18 (permalink)
    What kind of drive, and what kind of cable are you using?
     
    Have you checked in Disk Management once you enter Windows?  Have you installed the different chipset and RST drivers for your motherboard?
    #4
    Bali2010
    New Member
    • Total Posts : 25
    • Reward points : 0
    • Joined: 2018/08/16 16:04:15
    • Status: offline
    • Ribbons : 0
    Re: How do i enable U.2 port on X299 Dark? 2020/11/19 14:24:29 (permalink)
    I use the Delock U.2(SFF-8643) to SAS(SFF-8639)+SATA cable. I checked the disk management and didnt showed the HDD. I trying to use the Seagate Exos 7E8 6TB HDD drive. And didnt installed a different chipset.
    #5
    Bali2010
    New Member
    • Total Posts : 25
    • Reward points : 0
    • Joined: 2018/08/16 16:04:15
    • Status: offline
    • Ribbons : 0
    Re: How do i enable U.2 port on X299 Dark? 2020/11/19 14:26:16 (permalink)
    Oh sry i already installed the RST drivers bud i didnt installed another chipset driver.
     
    #6
    DEJ915
    SSC Member
    • Total Posts : 544
    • Reward points : 0
    • Joined: 2013/11/03 21:58:26
    • Status: offline
    • Ribbons : 11
    Re: How do i enable U.2 port on X299 Dark? 2020/11/19 16:49:39 (permalink)
    Bali2010
    I use the Delock U.2(SFF-8643) to SAS(SFF-8639)+SATA cable. I checked the disk management and didnt showed the HDD. I trying to use the Seagate Exos 7E8 6TB HDD drive. And didnt installed a different chipset.


    Why are you trying to use SATA drive on NVMe U.2 port?  Use SATA cable to the SATA port instead.  U.2 uses a similar looking physical 12G SAS connector but they are not compatible at all.
    #7
    teko360x
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2021/06/01 23:39:03
    • Status: offline
    • Ribbons : 0
    Re: How do i enable U.2 port on X299 Dark? 2021/06/02 06:26:52 (permalink)
    were you able to solve this issue ? 
    #8
    Jump to:
  • Back to Mobile