This is a weird one, So I had a power outage yesterday - system went down. No big deal, I go to reboot, recovery loop. So now I'm thinking my install got a corrupt driver or otherwise - something is toast with my windows install.
But I couldn't help but notice that after a failed normal windows boot - my system would restart and the sdd activity light for M.2 (my boot drive) would continue flashing away and wouldn't stop, even in bios; without a full power down. Stranger still, when it was exibiting this behavior (basically after 1 failed boot/reboot cycle) the SSD would no longer be detected as a boot option or in a windows installer. Very odd and random. I didn't have time to mess with it before work so I leave things here.
Come home, and what do you know - IT BOOTS FINE. ****? so the magic ghost posessing my micro2 was appeased by 4 hours of doing nothing - which is odd because I tried a 30 second PSU UNPLUGGED power drain - so that's not why. I got no idea, but whatever - we're back.
But I'm thinking that whatever this gremlin is - I'd rather just TRY a nuke. So I reinstall windows 10 2004, no problems.
Except one, and this is weird, the 2nd and 3rd error led below my socket are flipped on whenever windows loads now - the system is working fine however. What the * Removed TOS Violation* is going on? Speculations? Suggestions?
X99 Micro 2 Build - 5820k @ 4.5Ghz 1.2v (80mV+ offset) (45x100) RING (x36) 24GB DDR4 2400MHZ 17-16-16-16 NVIDIA Titan X Maxwell
CPU/GPU loop keeps things idle around 35 GPU 45 CPU. Long-Term ST with ADIA or PRIME passes.
Windows 10 Pro N (2004)
post edited by sofluxed - 2020/09/14 14:35:36
Attached Image(s)