tived
iCX Member
- Total Posts : 301
- Reward points : 0
- Joined: 2010/09/06 23:12:46
- Location: Sydney : NSW : Australia
- Status: offline
- Ribbons : 0
Hi everyone
is there any SR-2 users who are running with NVMe drives on their SR-2
i am particularly interested in know how? If it is your boot drive
i know this is an old board now but she is still good for speed ;-) for what I do
thanks
henrik
Henrik - A Dane Down Under Current systems: EVGA Classified SR-2 Lian Li PC-V2120 Black, Antec 1200 PSU, 2x X5650 (stock/4.2xxGhz), CPU Cooling: Noctua NH-D14 - Ram: (48gb) 6x 8Gb Kingston ECC 1333 KVR1333D3D4R9S/8GI - Disks & controllers: Boot (Areca 1882ix-24): 8R0 128GB SAMSUNG 830 + 12R0 INTEL 520 120GB's - 1x IBM M1015 7x Seagate SV35 2TB - GPU: Asus GTX-680 - Monitors: NEC 2690v2 & 2x Dell 2716 - Profiler X-rite: Eye-One Pro
|
subvert
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2010/05/26 17:15:21
- Status: offline
- Ribbons : 0
Re: SR-2 and NVMe drives
2020/05/17 16:18:28
(permalink)
I looked into this a few weeks ago and it doesn't look like you would be able to boot from NVMe on SR-2
SR-2 / 2 x X5650 / 48Gb (6 x 8gb) / RTX 2080 super, GTX 1080Ti / Lian-Li PC-A77F
|
tived
iCX Member
- Total Posts : 301
- Reward points : 0
- Joined: 2010/09/06 23:12:46
- Location: Sydney : NSW : Australia
- Status: offline
- Ribbons : 0
Re: SR-2 and NVMe drives
2020/05/18 05:13:18
(permalink)
Thanks subvert,
it was worth a try
henrik
Henrik - A Dane Down Under Current systems: EVGA Classified SR-2 Lian Li PC-V2120 Black, Antec 1200 PSU, 2x X5650 (stock/4.2xxGhz), CPU Cooling: Noctua NH-D14 - Ram: (48gb) 6x 8Gb Kingston ECC 1333 KVR1333D3D4R9S/8GI - Disks & controllers: Boot (Areca 1882ix-24): 8R0 128GB SAMSUNG 830 + 12R0 INTEL 520 120GB's - 1x IBM M1015 7x Seagate SV35 2TB - GPU: Asus GTX-680 - Monitors: NEC 2690v2 & 2x Dell 2716 - Profiler X-rite: Eye-One Pro
|
subvert
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2010/05/26 17:15:21
- Status: offline
- Ribbons : 0
Re: SR-2 and NVMe drives
2020/05/19 10:36:22
(permalink)
No problem ! I love my SR-2, still going strong !
On a similar note... Have you every had issues with your SATA 3 (red) ports ?
Mine are 'on' in the bios, but bios doesn't see drives connected to them ?
If you are using SATA 3, are your speeds better than the SATA 2 ports ?
SR-2 / 2 x X5650 / 48Gb (6 x 8gb) / RTX 2080 super, GTX 1080Ti / Lian-Li PC-A77F
|
tived
iCX Member
- Total Posts : 301
- Reward points : 0
- Joined: 2010/09/06 23:12:46
- Location: Sydney : NSW : Australia
- Status: offline
- Ribbons : 0
Re: SR-2 and NVMe drives
2020/05/21 20:58:40
(permalink)
I know how you feel, I will be sad to let her go
but she will be up for sale soon
henrik
Henrik - A Dane Down Under Current systems: EVGA Classified SR-2 Lian Li PC-V2120 Black, Antec 1200 PSU, 2x X5650 (stock/4.2xxGhz), CPU Cooling: Noctua NH-D14 - Ram: (48gb) 6x 8Gb Kingston ECC 1333 KVR1333D3D4R9S/8GI - Disks & controllers: Boot (Areca 1882ix-24): 8R0 128GB SAMSUNG 830 + 12R0 INTEL 520 120GB's - 1x IBM M1015 7x Seagate SV35 2TB - GPU: Asus GTX-680 - Monitors: NEC 2690v2 & 2x Dell 2716 - Profiler X-rite: Eye-One Pro
|
Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: SR-2 and NVMe drives
2020/06/19 14:26:22
(permalink)
☄ Helpfulby tived 2020/06/21 03:38:38
Hohohhold on guys! The SR-2 CAN boot from an NVMe drive with Clover / DUET the same way X58 boards can. Not even talking about the 950PRO that supposedly has AHCI mode but mine never booted on the SR-2 without Clover. I've done it years ago and remember it booted from USB drive first which then initialized the NVMe drive and booted Windows.
post edited by Bepzinky - 2020/06/19 14:28:36
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: SR-2 and NVMe drives
2020/06/21 01:33:29
(permalink)
Use a cheep raidcontroller with a bunch of SSD's in raid0. 4x250GB SSD around 1800mb/s, r/w in a old SR-2 is fast. And its easy to backup the system and restore it after hd failure
post edited by Robbanswe - 2020/06/21 09:25:33
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
tived
iCX Member
- Total Posts : 301
- Reward points : 0
- Joined: 2010/09/06 23:12:46
- Location: Sydney : NSW : Australia
- Status: offline
- Ribbons : 0
Re: SR-2 and NVMe drives
2020/06/21 03:40:38
(permalink)
Hi Rob,
I have 20:SSD’s on a Areca 1882ix-24 but thought a NVME would freshen up the old lady 😉
Henrik - A Dane Down Under Current systems: EVGA Classified SR-2 Lian Li PC-V2120 Black, Antec 1200 PSU, 2x X5650 (stock/4.2xxGhz), CPU Cooling: Noctua NH-D14 - Ram: (48gb) 6x 8Gb Kingston ECC 1333 KVR1333D3D4R9S/8GI - Disks & controllers: Boot (Areca 1882ix-24): 8R0 128GB SAMSUNG 830 + 12R0 INTEL 520 120GB's - 1x IBM M1015 7x Seagate SV35 2TB - GPU: Asus GTX-680 - Monitors: NEC 2690v2 & 2x Dell 2716 - Profiler X-rite: Eye-One Pro
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: SR-2 and NVMe drives
2020/06/21 09:12:22
(permalink)
have a couple of nvme in my drawer so if someone make a easy way to set it up
Im on 😁👍
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30975
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: SR-2 and NVMe drives
2020/06/21 11:11:23
(permalink)
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: SR-2 and NVMe drives
2020/06/21 13:48:58
(permalink)
Im using win7
My ddr3 ram works better on both my SR-2
With win7+ OC.
I dont have the time to try it out 😅
Building a house is priority right now
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: SR-2 and NVMe drives
2020/06/28 15:27:17
(permalink)
I've recently set up a Kingston A2000 NVMe with Silverstone M.2 - PCI-E adapter, works like a charm by using this guide: https://www.win-raid.com/t3286f50-Guide-NVMe-boot-for-systems-with-legacy-BIOS-and-UEFI-board-DUET-REFIND.html Done in 30 minutes, including Windows installation, much easier than it used to be years ago when using Clover. I do get the 'WHEA recovered' errors sorted out, disabled SATA3/USB3.0 but it still drops me PCI-E related WHEA warning (not BSOD, just a warning) in event viewer every 5 minutes. Could be the NVMe drive, could be the GPU (GT1030)...P95 passed hours and hours of testing, 0 issues. Considering this is obsolete hardware and has no W10 drivers, it could be absolutely ANYTHING, it's not OC related either.
post edited by Bepzinky - 2020/06/28 15:43:30
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: SR-2 and NVMe drives
2020/06/29 11:03:36
(permalink)
Just a warning) in event viewer every 5 minutes.
Holy cow, Im not installing anything that gives a warning every 5minutes thats torture 😅
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: SR-2 and NVMe drives
2020/06/29 13:00:37
(permalink)
If i was 100% sure where it came from, I wouldn't care but...I have no clue what causes this. :D
You won't see any messages on the screen, just in the event viewer.
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: SR-2 and NVMe drives
2020/07/05 08:11:12
(permalink)
My LSI9260 pumping 2000/1400mb/s R/W 4 ssd drives in raid0. HD bench is little unstable because im OC cpu`s, probably better results with original settings. Theoretical: 5 ssd`s 2500/1650mb/s 6 ssd`s 3000/1800mb/s PCI3.0 is 100% faster than SR-2`s Pcie 2.0. So Nvme 4x pcie Pci 3.0 adapter is half the speed on SR-2. A Samsung 970 pumping 3500mb/s on a 4x pcie 3.0 but only half the speed on a Pcie2.0 So theoretical 1750/1750mb/s R/W on a SR-2 with Nvme and 4x pcie nvme card. Pcie 8x and 16x nvmecard is only for motherboard with 4x4x4x4 and 4x4x in uefi. So a pcie 8x raidcard with a bunch of ssd`s is faster than a single nvme 
post edited by Robbanswe - 2020/07/05 09:23:02
Attached Image(s)
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Sajin
EVGA Forum Moderator
- Total Posts : 49165
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: SR-2 and NVMe drives
2020/07/05 14:00:14
(permalink)
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: SR-2 and NVMe drives
2020/07/06 05:40:47
(permalink)
Of topic Sajin  Put your pcie 4.0 nvme in a SR-2 and u get 1700-1800mb/s, my old raid card is faster.
post edited by Robbanswe - 2020/07/06 14:32:40
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
tived
iCX Member
- Total Posts : 301
- Reward points : 0
- Joined: 2010/09/06 23:12:46
- Location: Sydney : NSW : Australia
- Status: offline
- Ribbons : 0
Re: SR-2 and NVMe drives
2020/07/06 23:34:26
(permalink)
is that all ;-) lol - shame it is not in the SR-2 Sajin
Robbanswe
So a pcie 8x raidcard with a bunch of ssd`s is faster than a single nvme
Single nvme. 
Henrik - A Dane Down Under Current systems: EVGA Classified SR-2 Lian Li PC-V2120 Black, Antec 1200 PSU, 2x X5650 (stock/4.2xxGhz), CPU Cooling: Noctua NH-D14 - Ram: (48gb) 6x 8Gb Kingston ECC 1333 KVR1333D3D4R9S/8GI - Disks & controllers: Boot (Areca 1882ix-24): 8R0 128GB SAMSUNG 830 + 12R0 INTEL 520 120GB's - 1x IBM M1015 7x Seagate SV35 2TB - GPU: Asus GTX-680 - Monitors: NEC 2690v2 & 2x Dell 2716 - Profiler X-rite: Eye-One Pro
|
Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: SR-2 and NVMe drives
2020/07/07 05:52:40
(permalink)
Rookie numbers :D Hoping to see 20GB/s sequential in quad-raid0 when 980PRO drops. These are pretty filled up 970 PRO's: 
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: SR-2 and NVMe drives
2020/07/08 00:52:22
(permalink)
Very fast Sajin 🤟😁
My old slappy threadripper 3x970, 9800mb/s
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: SR-2 and NVMe drives
2020/07/09 13:38:06
(permalink)
Bepzinky
Rookie numbers :D Hoping to see 20GB/s sequential in quad-raid0 when 980PRO drops. These are pretty filled up 970 PRO's:
Great  This new Threadrippers is insane with pcie 4.0 and total of 7 nvme in raid0 with breakoutcard 35000mb/s heoretical 
post edited by Robbanswe - 2020/07/09 13:54:19
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
tived
iCX Member
- Total Posts : 301
- Reward points : 0
- Joined: 2010/09/06 23:12:46
- Location: Sydney : NSW : Australia
- Status: offline
- Ribbons : 0
Re: SR-2 and NVMe drives
2020/07/10 00:12:50
(permalink)
Ouch, I stripped two Corsair MP600 but their perf isn’t that great or at least I am not able to make them sing 🎶
I’ll try and find the benchmark result
Henrik - A Dane Down Under Current systems: EVGA Classified SR-2 Lian Li PC-V2120 Black, Antec 1200 PSU, 2x X5650 (stock/4.2xxGhz), CPU Cooling: Noctua NH-D14 - Ram: (48gb) 6x 8Gb Kingston ECC 1333 KVR1333D3D4R9S/8GI - Disks & controllers: Boot (Areca 1882ix-24): 8R0 128GB SAMSUNG 830 + 12R0 INTEL 520 120GB's - 1x IBM M1015 7x Seagate SV35 2TB - GPU: Asus GTX-680 - Monitors: NEC 2690v2 & 2x Dell 2716 - Profiler X-rite: Eye-One Pro
|
Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: SR-2 and NVMe drives
2020/07/10 02:32:36
(permalink)
I have an MP600 too...was hyped when it came out and just 'yolo' ordered the 2TB one, just to find out 970PRO kicks it's butt in everything but Q8 sequential read/write. Empty 4x1TB 970PRO array was hitting 13GB/s read on the TR I can't wait for the 980PRO's, these should be around 20-24GB/s read, nearly approaching DDR3 RAM :D The MP and the Aorus PCIE4.0 NVMe's are all TLC drives and they get a big hit when you fill them up with data. 970PRO is MLC and doesn't care that much. The MP600 is nothing special: 
post edited by Bepzinky - 2020/07/10 02:36:35
|