gelbuilding
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2017/05/06 07:03:21
- Status: offline
- Ribbons : 0
I had to remove the VRM fans to fit the Noctua NH-L12S. As you can see the air cooler fits after removing the fans and the Noctua air cooler fan is blowing air over the VRM. Should change the air cooler for one that doesn't clash with the VRM fans or is it ok.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Noctua NH-L12S installed in X299 Dark
2020/06/19 19:12:39
(permalink)
Why would you use this cooler on an X299? This cooler is meant for a small form factor case, and this is not a small form factor motherboard. You should get a much more suited cooler.
|
gelbuilding
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2017/05/06 07:03:21
- Status: offline
- Ribbons : 0
Re: Noctua NH-L12S installed in X299 Dark
2020/06/19 20:14:02
(permalink)
I will replace it with, Noctua NH-D15S this should work better and allow us to install the VRM fans. Thanks for your reply.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Noctua NH-L12S installed in X299 Dark
2020/06/19 20:17:26
(permalink)
Just verify the height will fit in your case, and you should get great performance :-)
|
gelbuilding
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2017/05/06 07:03:21
- Status: offline
- Ribbons : 0
Re: Noctua NH-L12S installed in X299 Dark
2020/06/19 20:22:41
(permalink)
Thanks, Yes I checked it 165mm high it will fit. I bought the smaller one without considering the VRM fan, my bad.
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: Noctua NH-L12S installed in X299 Dark
2020/06/19 21:53:16
(permalink)
gelbuilding the Noctua air cooler fan is blowing air over the VRM.
No, it isn't, but it would be if you flipped the fan over so that it blows instead of sucks. If you look closely, you'll see arrows on the fan frame showing the airflow and fan rotation directions. See also: Noctua NH-L12S Information Sheet (PDF) "Low-profile mode: Run with the NF-A12x15 fan installed underneath the fin stack, the NH-L12S stands only 70mm tall. The fan can be installed blowing upwards or blowing downwards in order to match the airflow direction inside the case." "High-clearance mode: Run with the NF-A12x15 fan installed on top, the NH-L12S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heatspreaders of up to 45mm in height."
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Noctua NH-L12S installed in X299 Dark
2020/06/20 00:06:56
(permalink)
Lol, I couldn’t get the pictures to load while traveling, and didn’t realize the fan was underneath.
That would definitely alleviate clearance issues.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: Noctua NH-L12S installed in X299 Dark
2020/06/20 00:11:58
(permalink)
I like these small fans from EVGA X299 Dark VRM. I hope EVGA will prepare something special as well for DDR5. Good motherboard as X299 Dark, Intel processors with innovations and good improvement in performance per core and I could stay with Intel.
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: Noctua NH-L12S installed in X299 Dark
2020/06/20 00:28:16
(permalink)
the_Scarlet_one Lol, I couldn’t get the pictures to load while traveling, and didn’t realize the fan was underneath.
That would definitely alleviate clearance issues.
Know what you mean..Hate it when that happens. I was thinking he could put the fan on top which would most likely make room for the VRM fans..And flip the fan over..It would look better too I think, I dunno.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
gelbuilding
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2017/05/06 07:03:21
- Status: offline
- Ribbons : 0
Re: Noctua NH-L12S installed in X299 Dark
2020/06/20 02:06:47
(permalink)
Great idea Bob, didn't even cross my mind. Anyhow too late now I have already ordered the NH-D15S.
|
Hoggle
EVGA Forum Moderator
- Total Posts : 10101
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: Noctua NH-L12S installed in X299 Dark
2020/06/20 02:35:42
(permalink)
gelbuilding Great idea Bob, didn't even cross my mind. Anyhow too late now I have already ordered the NH-D15S.
At least you are getting a good cooler in the long run.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Noctua NH-L12S installed in X299 Dark
2020/06/20 06:27:58
(permalink)
The NH-D15 should give you better temps over all due to more surface area.
|
gelbuilding
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2017/05/06 07:03:21
- Status: offline
- Ribbons : 0
Re: Noctua NH-L12S installed in X299 Dark
2020/06/25 05:35:57
(permalink)
Fitted the NH-D15s. Thanks for all the help much appreciated.
Attached Image(s)
|
coolmistry
CLASSIFIED Member
- Total Posts : 2502
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: Noctua NH-L12S installed in X299 Dark
2020/06/25 09:02:33
(permalink)
bob16314
gelbuilding the Noctua air cooler fan is blowing air over the VRM.
No, it isn't, but it would be if you flipped the fan over so that it blows instead of sucks.
If you look closely, you'll see arrows on the fan frame showing the airflow and fan rotation directions.
Good catch Bob.
Windows 11 Home 64bits up to Dated i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|