EVGA

X299 FTWK BIOS 1.23 crashes @ rendering

Author
Post
Essentials Only Full Version
Ki2Is
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2020/01/03 02:44:00
  • Status: offline
  • Ribbons : 0
2020/05/31 02:03:08 (permalink)
Hey, I have got a 7900x,  x299 FTW K and Bios v.1.23.
When running 4.5Ghz ADAPTIVE VCORE all core(NO BSOD), my BCLK stays at 100Mhz, but when switching to 4.8 4.8 4.7 4.8 4.6 4.6 4.7 4.7 4.7 4.7 ADAPTIVE VCORE, BCLK goes up to 102.5Mhz and crashes while rendering.
I have attached a screenshot of HWinfo.

I have looked already for the BCLK spread spectrum setting in the BIOS, but cannot find anything.
How can I disable that, to get 100Mhz ?
 
Thx.
 
 
post edited by Ki2Is - 2020/05/31 02:08:46

Attached Image(s)

#1

5 Replies Related Threads
    arestavo
    CLASSIFIED ULTRA Member
    • Total Posts : 6916
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 76
    Re: X299 FTWK BIOS 1.23 crashes @ rendering 2020/05/31 07:05:46 (permalink)
    Does it do the same 102.5MHz when you set the all core frequency to 4.6 or 4.7? 
     
    I've run into issues with per core overclocking and have found all core to be much more stable for my 10940X on the X299 FTW K.
    #2
    Ki2Is
    New Member
    • Total Posts : 22
    • Reward points : 0
    • Joined: 2020/01/03 02:44:00
    • Status: offline
    • Ribbons : 0
    Re: X299 FTWK BIOS 1.23 crashes @ rendering 2020/06/01 01:46:22 (permalink)
    I haven't tried 4.6 or 4.7ghz, cause it's getting too hot. I'm getting a BCLK of 101.8Mhz when running all core 4.5ghz @1.237v.
    #3
    Bobmitch
    Omnipotent Enthusiast
    • Total Posts : 8328
    • Reward points : 0
    • Joined: 2007/05/07 09:36:29
    • Status: offline
    • Ribbons : 47
    Re: X299 FTWK BIOS 1.23 crashes @ rendering 2020/06/01 06:06:37 (permalink)
    Try setting a static  voltage of 1.175 and 4.6 GHZ....
     
    I use that 24/7 with no issues.  Temps normally don't exceed low 80's

    MSI MAG X670-E Tomahawk;  Ryzen 7 7800X3D; Asus TUF RTX 4070 TI OC; Seasonic Vertex GX-1000 PSU; 32 GB  Corsair Vengeance DDR5-6000 RGB; Corsair iCue Link H150i RGB 360MM AIO; 2-Western Digital Black 4 TB SN850X NVMe; Creative SoundBlaster Z;  Lian Li Lancool III; EVGA Z15 Keyboard; Razer Viper 8K Mouse


    Heatware:  http://www.heatware.com/eval.php?id=72402    Affiliate code: 1L2RV0BNQ6                                          
    Associate Code:  UD82LJP3Y1FIQPR
     


    #4
    Ki2Is
    New Member
    • Total Posts : 22
    • Reward points : 0
    • Joined: 2020/01/03 02:44:00
    • Status: offline
    • Ribbons : 0
    Re: X299 FTWK BIOS 1.23 crashes @ rendering 2020/06/02 01:46:47 (permalink)
    I will give it a try. Thx.
    post edited by Ki2Is - 2020/06/02 01:53:10
    #5
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 102291
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Netherlands
    • Status: online
    • Ribbons : 84
    Re: X299 FTWK BIOS 1.23 crashes @ rendering 2020/06/04 00:56:41 (permalink)
    bobmitch
    Try setting a static  voltage of 1.175 and 4.6 GHZ....
     
    I use that 24/7 with no issues.  Temps normally don't exceed low 80's


    +1

    AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #6
    Jump to:
  • Back to Mobile