hello
 
So I am having an issue with the Precision X1 or the adapter's firmware.
On default settings the fans are mainly quiet but once the temp reaches 75C one or two fans spin up furiously and slow down after a second or two. unfortunately this makes a weird and disturbing noise I am trying to get rid of.
I downloaded Precision X1 to enabled "Fan Curve Control" setting Preset to "Aggressive", now the noise has gone and the GPU cools down slightly better (~70 C instead of ~75) but the problem is that the settings are not being saved! The fan setting resets to it's default after system reboot and I have to open Precision X1 again before launching any GPU intensive application.
I'm seeking for a way to permanently fix this without having to launch Precision X1 every time
 
Please advice, thank you!
 
VGA: EVGA GeForce RTX 2070 XC ULTRA
OS: Windows 10 x64 (updated)
Driver: 445.87
 

Fixed RPM can be saved & will work without Precision running
 
So, you could try 80% fans - Apply then Save ... when you reboot PC fans should run at 80%
 
You will have to watch your temps & adjust the "%" fan until you find the right Mix of sound quality to cool card
 
 
Your temps might be cooler if you run your case fans faster ... You Need to get the heat out of the case ... where the GPU cooler dumps most of the heat
 
Start With Windows:  Need to Check 2 boxes:  "Start with OS" & "Apply previous settings on load" 
 
Warning:  Not when looking for Best OC ---> cause when it crashes --> those are Not the setting you want to load on reboot
 
 

 
 
Using Fan Curve With Precision Running:
 
 

Happy to Help