Silverback4
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/05/10 07:50:21
- Status: offline
- Ribbons : 0
Hi, I've just installed my new 2080 super ftw3. I booted the PC up and it was fine installed drivers etc then restarted all fine. I then shut the PC down and booted again, there was 3 red lights that came on and the fans went to full speed and didn't go until I shut the PC down. It seems that it does this every other time I start my PC after shutting down. This seems to be a common problem with these cards, Does anyone know If there is a fix for this issue? Is it safe to use still when its not in flash mode? I'm using two separate 8 pin cables and my power supply is a corsair hx750i. Upgraded from a evga gtx 1080 ftw2 which was a brilliant card and led me to purchase this one, So pretty annoying this one isn't working correctly. I'm hoping i wont have to rma the card.
Any help much appreciated.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102291
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/10 08:20:57
(permalink)
Your post was stuck in the spam filter. Sorry for the delay.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102291
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/10 08:34:07
(permalink)
On your video card I believe you have a switch that can be moved from normal to OC. Does this happen when the switch is in either position: 
|
Silverback4
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/05/10 07:50:21
- Status: offline
- Ribbons : 0
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/10 08:57:04
(permalink)
rjohnson11
On your video card I believe you have a switch that can be moved from normal to OC. Does this happen when the switch is in either position:
I put into oc mode straight away so i will try the normal mode, thanks.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/10 12:24:15
(permalink)
☼ Best Answerby Cool GTX 2020/05/10 15:17:56
Enable erp mode inside your motherboard bios if available.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30996
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/10 12:45:33
(permalink)
Sajin
Enable erp mode inside your motherboard bios if available.
+1  Also turn Off fast boot in BIOS & In Windows 10 --> turn Off Fast Startup
|
Silverback4
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/05/10 07:50:21
- Status: offline
- Ribbons : 0
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/10 15:13:39
(permalink)
Sajin
Enable erp mode inside your motherboard bios if available.
Thanks so much. I have enabled erp mode and it seems to have fixed it. I have tried it 10 times and the 3 red lights have not reappeared! What does erp mode actually do? and why wouldn't it work without it enabled?
|
Silverback4
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/05/10 07:50:21
- Status: offline
- Ribbons : 0
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/10 15:14:56
(permalink)
Cool GTX
Sajin
Enable erp mode inside your motherboard bios if available.
+1
Also turn Off fast boot in BIOS & In Windows 10 --> turn Off Fast Startup
Thanks. I already had both fast startup options turned off. enabled erp and seems to have fixed it.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/10 15:33:04
(permalink)
Silverback4
Sajin
Enable erp mode inside your motherboard bios if available.
Thanks so much. I have enabled erp mode and it seems to have fixed it. I have tried it 10 times and the 3 red lights have not reappeared! What does erp mode actually do? and why wouldn't it work without it enabled?
No problem. https://www.onecomputerguy.com/erp-ready
|
Silverback4
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/05/10 07:50:21
- Status: offline
- Ribbons : 0
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/11 04:57:46
(permalink)
Sajin
Silverback4
Sajin
Enable erp mode inside your motherboard bios if available.
Thanks so much. I have enabled erp mode and it seems to have fixed it. I have tried it 10 times and the 3 red lights have not reappeared! What does erp mode actually do? and why wouldn't it work without it enabled?
No problem.
I've just had an email from evga support today. They said the 3 red lights is usually associated with dirty power and that it is a protection mode to prevent damage and to obtain another PSU to test with? Just trying to make sure this card isn't faulty before i give my 1080 to my brother.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/11 11:57:23
(permalink)
Feel free to test with another psu then.
|
kaptanedi
New Member
- Total Posts : 30
- Reward points : 0
- Joined: 2013/01/25 03:47:26
- Status: offline
- Ribbons : 0
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/05/31 06:58:57
(permalink)
Hello, I have the same card. And the same problem occurs. Sometimes the fans spin at full speed and the 3 red lights turn on continuously. Some say erp should be off, but this was not necessary in previous installations. Why erp should be closed.
|
kaptanedi
New Member
- Total Posts : 30
- Reward points : 0
- Joined: 2013/01/25 03:47:26
- Status: offline
- Ribbons : 0
Re: 2080 super ftw3 ultra 3 red lights every other boot
2020/06/09 19:47:28
(permalink)
No satisfactory support on this issue?
|