Hello,
I am attempting to boot my X99 Micro board and I am running into a boot loop. When the power button is pressed, Fans spin up for about a half second, and "C" shows on the readout, then it turns off, and does this over again continuously. I have a Xeon E5-2650 v3 installed with a fresh BIOS chip from EVGA with the latest BIOS. I don't have any other CPUs for testing. I have tried clearing CMOS and making sure everything is installed correctly. I am using one stick of RAM, and tried it in all four slots with the same issue. It also has the same symptoms with no memory installed. I tried with a different stick with the same issues.
LED Indicators:
* 5VSB_LED : White (solid constantly)
* VCC_LED : Red
* VSN_LED : Amber
* FIVR_LED : Red
* CATERR_LED : Red
* ERR_LED0 : Red
* ERR_LED1 : Red
* ERR_LED2 : Red
The motherboard manual didn't have any info about the LEDs other than the Power LED, DIMM LED and Standby LED, so I'm not sure what these signify about which part of the board could be bad.
If I am missing something, please let me know. Thanks!