EVGA

AnsweredBoot Order Question

Author
Post
Essentials Only Full Version
Dweinin357
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2020/02/08 18:53:36
  • Status: offline
  • Ribbons : 0
2020/03/08 14:09:53 (permalink)
Hello All.  
 
Just switched over from MAC to PC and built my own rig.  I have a question about boot order.
 
I have two SSDs, internal.
1- Samsung 1TB
2- SanDisk - 500GB
 
I installed windows 10 on the Samsung and Linux on the 500GB.
 
I played around with linux but I run a lot of adobe software and unfortunately it is not linux friendly.  I set my boot order to boot from the SanDisk and Linux.  So I'd like to switch it back to the Samsung and boot from windows and just use the SanDisk as an additional drive.  However in my bios for boot order.... I can't seem to find the option to boot first from Windows...  Its just not listed.  What am I doing incorrectly?
 
 
 
 

Attached Image(s)

#1
See best answer

10 Replies Related Threads
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Boot Order Question 2020/03/08 14:22:40 (permalink)
    Have you tried plugging the drive into a different sata port to see if it will show up then?


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #2
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Boot Order Question 2020/03/08 14:23:26 (permalink)
    I would also suggest trying a different sata cable too if you continue to have problems with it not showing up.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #3
    HayzBaby
    iCX Member
    • Total Posts : 483
    • Reward points : 0
    • Joined: 2010/05/04 13:06:31
    • Status: offline
    • Ribbons : 4
    Re: Boot Order Question 2020/03/08 15:21:44 (permalink)
    I would try just plugging the windows drive in, leave the linux out, restart, see if it picks up the drive, then just plug the linux back in and do a 2nd reboot just to see if it detects both drives. I'm running the same bios and my options look about the same. Maybe check your advanced settings and see what drive is showing up after you boot with just the windows drive

    Heatware account: http://www.heatware.com/eval.php?id=78372
     
    https://www.modsrigs.com/detail.aspx?BuildID=40859
    #4
    XrayMan
    Insert Custom Title Here
    • Total Posts : 73000
    • Reward points : 0
    • Joined: 2006/12/14 22:10:06
    • Location: Santa Clarita, Ca.
    • Status: offline
    • Ribbons : 115
    Re: Boot Order Question 2020/03/08 16:37:08 (permalink)
     
    Moved to General Hardware.

                My Affiliate Code: 8WEQVXMCJL
     
            Associate Code: VHKH33QN4W77V6A
     
                 
     
     
                      
     
     
     
              
     
       
     
               
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     



     
     
     
     
     
     &nbsp
    #5
    jasoncodispoti
    SSC Member
    • Total Posts : 628
    • Reward points : 0
    • Joined: 2013/03/18 14:40:28
    • Location: Nashville, TN
    • Status: offline
    • Ribbons : 14
    Re: Boot Order Question 2020/03/08 16:38:30 (permalink)
    If you boot into Linux are you able to see the Samsung Drive as being connected to the PC? That will tell you if this is a hardware issue or not. Assuming that the Samsung drive is visible when in Linux than I am betting that this has to do with UEFI boot settings. I am just not 100% sure off of the top of my head what it could be... I dont have access to my PC to be able to mess around with the settings for you. 

    Intel Core i7-9800x | EVGA X299 Dark| EVGA RTX 2080ti FTW3 Ultra HydroCopper | 32GB Corsair Dominator Platinum | EKWB Liquid Cooled Loop | Phanteks Enthoo Primo SE | EVGA SuperNOVA 1000 P2


    #6
    bob16314
    Omnipotent Enthusiast
    • Total Posts : 8048
    • Reward points : 0
    • Joined: 2008/11/07 22:33:22
    • Location: Planet of the Babes
    • Status: offline
    • Ribbons : 761
    Re: Boot Order Question 2020/03/08 17:37:09 (permalink) ☼ Best Answerby Dweinin357 2020/03/08 17:48:58
    Open the Hard Disk Drive BBS Priorities and the Samsung 1TB with Windows 10 on it might be shown there where you can select it and it will be added to the list of Boot Options..Then set it as Boot Option #1.

    * Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * 
     
    "Whatever it takes, as long as it works" - Me
     
     
     
    #7
    Dweinin357
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2020/02/08 18:53:36
    • Status: offline
    • Ribbons : 0
    Re: Boot Order Question 2020/03/08 17:50:17 (permalink)
    Thanks everyone.

    Bob16314- that was the trick.  Nailed it.  Hard Disk Drive BBS Priorties was at the bottom of my screen.  I didn't even see it.  Clicked it and the Windows option was there.  Booted up no problem.
     
    Thanks a million.
    #8
    bob16314
    Omnipotent Enthusiast
    • Total Posts : 8048
    • Reward points : 0
    • Joined: 2008/11/07 22:33:22
    • Location: Planet of the Babes
    • Status: offline
    • Ribbons : 761
    Re: Boot Order Question 2020/03/08 17:52:27 (permalink)
    Boom! 
     
    Figured as much..Happened to me before too..Glad to help.

    * Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * 
     
    "Whatever it takes, as long as it works" - Me
     
     
     
    #9
    XrayMan
    Insert Custom Title Here
    • Total Posts : 73000
    • Reward points : 0
    • Joined: 2006/12/14 22:10:06
    • Location: Santa Clarita, Ca.
    • Status: offline
    • Ribbons : 115
    Re: Boot Order Question 2020/03/08 18:02:50 (permalink)
     
    Good job. 
     
    (We are officially out of BR's now)             

                My Affiliate Code: 8WEQVXMCJL
     
            Associate Code: VHKH33QN4W77V6A
     
                 
     
     
                      
     
     
     
              
     
       
     
               
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     



     
     
     
     
     
     &nbsp
    #10
    bob16314
    Omnipotent Enthusiast
    • Total Posts : 8048
    • Reward points : 0
    • Joined: 2008/11/07 22:33:22
    • Location: Planet of the Babes
    • Status: offline
    • Ribbons : 761
    Re: Boot Order Question 2020/03/08 18:19:55 (permalink)
    XrayMan
     
    Good job. 
     
    (We are officially out of BR's now)             




     
    Thanks, man.

    * Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * 
     
    "Whatever it takes, as long as it works" - Me
     
     
     
    #11
    Jump to:
  • Back to Mobile