EVGA

Z390 Dark 9C Hangs for 15+ Seconds then goes to Windows

Author
Post
Essentials Only Full Version
carroll.shelby
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2011/08/04 21:56:03
  • Status: offline
  • Ribbons : 0
2020/01/21 10:48:44 (permalink)
My system seems to hang at 9C for around 15-20 seconds before moving on. This behavior started up within the last month or 2 and I'm not sure why. Any explanation? I went ahead and upped the VCore as I saw quite a few forum posts from yesteryear suggesting that VCore may be too low, but that doesn't seem to have helped. If 9C relates to the CPU my concern is a faulty board that's potentially going to kill my chip.  My Z390 Dark has been extremely questionable over the last 6 months, but after the recent RMA nightmare I endured, I ultimately kept my original board. 
#1

4 Replies Related Threads
    coolmistry
    CLASSIFIED Member
    • Total Posts : 2502
    • Reward points : 0
    • Joined: 2009/04/08 11:13:01
    • Location: Hemel Hempstead , London
    • Status: offline
    • Ribbons : 45
    Re: Z390 Dark 9C Hangs for 15+ Seconds then goes to Windows 2020/01/21 10:55:29 (permalink)
    carroll.shelby
    My system seems to hang at 9C for around 15-20 seconds before moving on. This behavior started up within the last month or 2 and I'm not sure why. Any explanation? I went ahead and upped the VCore as I saw quite a few forum posts from yesteryear suggesting that VCore may be too low, but that doesn't seem to have helped. If 9C relates to the CPU my concern is a faulty board that's potentially going to kill my chip.  My Z390 Dark has been extremely questionable over the last 6 months, but after the recent RMA nightmare I endured, I ultimately kept my original board. 


    That code 9C USB Detect in your manual book pages 153 for Z390 Dark!
    Try unplug All USB Device and try again boot up if successful then carry on plug Mouse and Keyboard to test again! 

    Windows 11 Home 64bits up to Dated
    i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator  X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
    #2
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49162
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Z390 Dark 9C Hangs for 15+ Seconds then goes to Windows 2020/01/21 15:28:34 (permalink)
    coolmistry
    carroll.shelby
    My system seems to hang at 9C for around 15-20 seconds before moving on. This behavior started up within the last month or 2 and I'm not sure why. Any explanation? I went ahead and upped the VCore as I saw quite a few forum posts from yesteryear suggesting that VCore may be too low, but that doesn't seem to have helped. If 9C relates to the CPU my concern is a faulty board that's potentially going to kill my chip.  My Z390 Dark has been extremely questionable over the last 6 months, but after the recent RMA nightmare I endured, I ultimately kept my original board. 


    That code 9C USB Detect in your manual book pages 153 for Z390 Dark!
    Try unplug All USB Device and try again boot up if successful then carry on plug Mouse and Keyboard to test again! 


    +1


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #3
    carroll.shelby
    New Member
    • Total Posts : 4
    • Reward points : 0
    • Joined: 2011/08/04 21:56:03
    • Status: offline
    • Ribbons : 0
    Re: Z390 Dark 9C Hangs for 15+ Seconds then goes to Windows 2020/01/21 18:08:57 (permalink)
    coolmistry
    carroll.shelby
    My system seems to hang at 9C for around 15-20 seconds before moving on. This behavior started up within the last month or 2 and I'm not sure why. Any explanation? I went ahead and upped the VCore as I saw quite a few forum posts from yesteryear suggesting that VCore may be too low, but that doesn't seem to have helped. If 9C relates to the CPU my concern is a faulty board that's potentially going to kill my chip.  My Z390 Dark has been extremely questionable over the last 6 months, but after the recent RMA nightmare I endured, I ultimately kept my original board. 


    That code 9C  in your manual book pages 153 for Z390 Dark!
    Try unplug All USB Device and try again boot up if successful then carry on plug Mouse and Keyboard to test again! 


    I'll give that a shot and report back! Thank you for the swift reply!
    #4
    coolmistry
    CLASSIFIED Member
    • Total Posts : 2502
    • Reward points : 0
    • Joined: 2009/04/08 11:13:01
    • Location: Hemel Hempstead , London
    • Status: offline
    • Ribbons : 45
    Re: Z390 Dark 9C Hangs for 15+ Seconds then goes to Windows 2020/01/22 01:09:39 (permalink)
    carroll.shelby
    coolmistry
    carroll.shelby
    My system seems to hang at 9C for around 15-20 seconds before moving on. This behavior started up within the last month or 2 and I'm not sure why. Any explanation? I went ahead and upped the VCore as I saw quite a few forum posts from yesteryear suggesting that VCore may be too low, but that doesn't seem to have helped. If 9C relates to the CPU my concern is a faulty board that's potentially going to kill my chip.  My Z390 Dark has been extremely questionable over the last 6 months, but after the recent RMA nightmare I endured, I ultimately kept my original board. 


    That code 9C  in your manual book pages 153 for Z390 Dark!
    Try unplug All USB Device and try again boot up if successful then carry on plug Mouse and Keyboard to test again! 


    I'll give that a shot and report back! Thank you for the swift reply!


    Sure please let us know how getting on? 

    Windows 11 Home 64bits up to Dated
    i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator  X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
    #5
    Jump to:
  • Back to Mobile