core and mem voltage is safe up ot what value?
i want to know about it when oc of kingpin.
i using now core up to 1.2v, mem up to 1.5v 
core 1.3-1.4, mem about 1.7v are safe for chip degradation and future broken incident?
now mine is safe on temp.
i want to know the voltage limit.
 

arthurgleman
core and mem voltage is safe up ot what value?
i want to know about it when oc of kingpin.
i using now core up to 1.2v, mem up to 1.5v 
core 1.3-1.4, mem about 1.7v are safe for chip degradation and future broken incident?
now mine is safe on temp.
i want to know the voltage limit.
 

Technical Guide and candies for RTX 2080 Ti Kingpin
 
All you need to know can be found in that thread

AHowes

arthurgleman
core and mem voltage is safe up ot what value?
i want to know about it when oc of kingpin.
i using now core up to 1.2v, mem up to 1.5v 
core 1.3-1.4, mem about 1.7v are safe for chip degradation and future broken incident?
now mine is safe on temp.
i want to know the voltage limit.
 

Depends on cooling. Card will error freeze up if its unstable with too much voltage. You'll also hit the power limit pretty quick on load if your not using the bios that removes the power/temp limit.

You really shouldn't see a benefit above 1.1-1.2v on stock cooling or water. Highest I've heard for ram is like maybe 1.55-1.6v on water.

too strange.

i had been in despair... the fluctuation of gpu core Mhz and voltage kepping whatever value was.
FF15 high 4k score "6800" compared with titan rtx "7000". 
probably full oc cpu,ddr ryzen3800x,3600ddr14cl as of now. gpu+100 2100Mhz, mem+1500 8500Mhz, vol auto, mem 1.53v, llc 2, dip gpu 2 switchs on
using px1 and classified tool and 100% fan.
 
but i adopted custom xoc bios and the all things changed.
the fluctuation disappeared and gpu clock value exceeded over +110!
great!
ill search the limit of perfomance from now!!!!!
 
some questions.
1. always full fan is noisy. the connector of 2fans can be connected on motherboard? no gpu system error and controllable?
2. in case custom xoc bios on normal or oc switch, temparature protection will be? "no powerlimit" ok?
3. i using 4fans on radiator of gpu and case fans, which all noctua expensive fans except for things of gpu and cpu default
    these enough? i dont want perfect watercool.
 
all reasons of low performance were powerlimit, i think.
 
 

1.093mv is the max safe voltage, and running 1.093mv 24/7 will reduce the lifespan of your gpu to 1 year...
 
https://forums.evga.com/Using-max-safe-voltage-reduces-gpu-lifespan-from-5-years-to-1-year-m2856901.aspx
 
1.2mv will work for awhile, but you'll be reducing the lifespan of your gpu even more if you're running 1.2mv 24/7.

AHowes
Huh? Running 1.093v will reduce the lifespan to only 1 year if used 24/7?

I've always ran max voltages... well on load.

Sure ya didnt mean higher then 1.093v?

I'm sure.

report.
finally, i got 2130Mhz gpu, 8100Mhz mem, +120 gpu, +1100 mem via xoc custom bios.
all temp was 65C.
this disappointed me absolutely.
this reason i dont know. why i cant raise up to too high by xoc bios?
shocked gone.
 

arthurgleman
report.
finally, i got 2130Mhz gpu, 8100Mhz mem, +120 gpu, +1100 mem via xoc custom bios.
all temp was 65C.
this disappointed me absolutely.
this reason i dont know. why i cant raise up to too high by xoc bios?
shocked gone.
 

If your still using the AIO cooler the kingpin came with you should not be using the XOC bios, your best bet would be to flash the LN2 bios to the OC bios position on the switch. That way you get full vrm fan speeds and maximum radiator fan speeds but keep your safeguards in place. Then to maximize that for efficiency replace your stock radiator fans with a higher rpm fans and or go with push/pull fans on the radiator.  Also unless you have a custom loop there is no reason to go above the 1.093 voltage either. You should be able to get to 2160mhz or above to maybe 2190mhz with the stock cooler and not even need the XOC bios or the Classified tool and you should be able to get the memory to around +1000 or +1100 without the classified tool as well. You should probably go back to the OC bios or the normal bios set everything to default, put your fans at max  and run the curve test in PX1 to see what you get for a + score from there, thats your starting point to see what your card is capable of to start with. If your temps are at 65C your card is not going to keep boosting higher thats for sure. Take a picture and see what your temps are at idle. 

AHowes
Yeah.. guesing.he is really pushing that voltage and it's getting thet hot which it wont boost good.

Ya need below 40c to see 2160-2190mhz. Keep.the voltage at 1.093v.

Yeah, AHowes my original forum name was dwexpress, i managed to get things screwed up in my account by requesting a username change from customer support several days ago.