superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Since finishing my first build I bought my first game for the pc the other day and I’m getting some glitches in game and was wondering If I’ve done something wrong..?
I have the 2080ti set to stock without oc, i think is like 2040mhz, with 7000mem.
In game I had everything set to ultra at first but was dropping below 45fps, so put everything to high and runs 60fps with very rarely dropping below that.
The glitches seam to go away when I drop the resolution to UltraHD, My monitor is 4K DCI, running 10bit full RBG (4:4:4).
What I’m seing is the hud flickering like crazy and like a lower screen tear, unplayable like this.
My gpu is getting to around 35-36deg max, memory is warmer on the left side of the card by a few degrees, could be a bad mount on water block cause this?
Other than that when I reduce to UltraHD and leave settings on high It seems flawless. Just want to know if its the game or my setup etc.
Thanks in advance.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102253
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 02:12:03
(permalink)
Please list all of your system specs to include make and model of PSU
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 03:07:23
(permalink)
rjohnson11
Please list all of your system specs to include make and model of PSU
Hope this helps, Copied from my build thread. Case - Lian-Li 011-Air Case Fans - 3x Noctua Industrial 120mm fans (PWM 2000rpm) Motherboard - EVGA Z390 Dark Memory - Corsair Vengeance PRO-RGB DDR4-3466Mhz (OC to 3800Mhz) 32GB Total. (Two DIMMs) CPU - Intel i9 9900K (OC to 5.2Ghz) PSU - EVGA G3 1000w GPU - Kingpin 2080 ti (OC to 2130Mhz, 8450mhz memory) with Hydro Copper. Vertical GPU Cable - Termaltake Platinum 300mm 16x cable Watercooling - Mo-Ra3 Pro420 external rad (stainless), dual D5 EK pumps, Heatkiller 200mm res, Heatkiller IV cpu block, Mayhem tube 16/10, Alphacool fittings, 9x140mm Noctua 2000rpm PMW fans, Koolance QD3 Quick release fittings, Mayhem UV premix. Monitor - EIZO CG319X
|
bp7178
iCX Member
- Total Posts : 373
- Reward points : 0
- Joined: 2016/04/15 15:24:51
- Status: offline
- Ribbons : 3
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 06:09:04
(permalink)
superclarkey
memory is warmer on the left side of the card by a few degrees, could be a bad mount on water block cause this?
Thanks in advance.
That is completely normal.
|
Tris1066
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2016/06/16 01:58:15
- Status: offline
- Ribbons : 0
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 07:08:17
(permalink)
I cant quite figure out what setting is causing this, but it is definitely an in game setting that is the issue.
Setting everything to ultra/maxed and running 4k, i get no flickering, but using the nvidia optimised settings (a mix of medium/high), the flickering hud elements and menus are back. Still trying to pin down exactly which setting is responsible.
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 07:47:31
(permalink)
bp7178
superclarkey
memory is warmer on the left side of the card by a few degrees, could be a bad mount on water block cause this?
Thanks in advance.
That is completely normal.
yeah? See Mem 1 is higher by 3 degress, to mem 2, thought maybe its a bad mount? 
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 07:48:36
(permalink)
Tris1066
I cant quite figure out what setting is causing this, but it is definitely an in game setting that is the issue.
Setting everything to ultra/maxed and running 4k, i get no flickering, but using the nvidia optimised settings (a mix of medium/high), the flickering hud elements and menus are back. Still trying to pin down exactly which setting is responsible.
So its not just me getting this issue, it is strange as you say with everything maxed it was fine.. was only when I was trying to be sensible it started to flicker. Unsure what I've messed with to cause this.
|
bp7178
iCX Member
- Total Posts : 373
- Reward points : 0
- Joined: 2016/04/15 15:24:51
- Status: offline
- Ribbons : 3
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 08:16:26
(permalink)
The max operating temp for GDDR6 is 95c. Consider instead that you are having a problem with a game that has just been launched.
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 08:43:56
(permalink)
bp7178
The max operating temp for GDDR6 is 95c. Consider instead that you are having a problem with a game that has just been launched.
That is my hope, just the first game I've installed so was a little worried, however I just been googling it and it seems my problems are a far cry from the issues some people are having. eek.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30975
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 08:44:24
(permalink)
bp7178
The max operating temp for GDDR6 is 95c. Consider instead that you are having a problem with a game that has just been launched.
+1 Run Benchmark software for diagnostics .... Not Games ... Games & driver bug .... Time Spy Fire Strike other
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 09:01:16
(permalink)
Cool GTX
bp7178
The max operating temp for GDDR6 is 95c. Consider instead that you are having a problem with a game that has just been launched.
+1
Run Benchmark software for diagnostics .... Not Games ... Games & driver bug ....
Time Spy
Fire Strike
other
I ran 3d port royal, 10,010 points, cinebench r20 5300points. Far as I thought it seemed to be ok. You say do bench marks, others said won’t know until you play games lol As mentioned happy to hear most likely a glitch. Just been playing on ultra settings for an hour no issues other than crippling fps lol 48-50 until I get near water then it goes down to 33–35. Doesn’t freeze though so should be happy with that! And thats in 4k DCI.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30975
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 09:16:45
(permalink)
Benchmarks Have the greatest Value .... because they are repeatable  You can evaluate changes you have made or compare to others PCs. Benchmarks are Synthetic ... so, Yes there are limits So, a demanding Benchmark Loop - will stress your PC - this tells you if your Hardware or settings has an issue We do not know if it is an Nvidia driver bug or the Game has a bug Make sure you are using a Certified DP cable (does Not have to be Expensive) or HDMI with enough bandwidth -- Not sure what your monitor supports find listed Certified DP cables: Products Database - DisplayPort Not Exactly a Gaming Monitor: EIZO CG319X
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 09:49:33
(permalink)
I presume the cable that came with the monitor is of high quality as its a professional monitor.
Yes it has to be the worst choice for a gaming monitor, max 60hz, but the colours are amazing :-) its not bad though, very sharp, no ghosting or anything like that I can see.
I use it for photography/print work, so its a different beast thats for sure..
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30975
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 09:53:10
(permalink)
because you use this professionally ... Did you check for any firmware updates from the mfg ?
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 10:17:20
(permalink)
Yes it updates automatically, has software running all the time as it has a usb cable to it that looks after all the built in colour management. However I’m sure they don’t give a **** about any game updates lol
I clearly know this is not a gaming monitor, but I’m happy with the compromise.
The gpu is all updated of course.
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 10:19:38
(permalink)
Do i need dp 1.4? I think the monitor is 1.2?
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30975
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 10:58:49
(permalink)
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 18:33:10
(permalink)
superclarkey
rjohnson11
Please list all of your system specs to include make and model of PSU
Hope this helps,
Copied from my build thread.
Case - Lian-Li 011-Air
Case Fans - 3x Noctua Industrial 120mm fans (PWM 2000rpm)
Motherboard - EVGA Z390 Dark
Memory - Corsair Vengeance PRO-RGB DDR4-3466Mhz (OC to 3800Mhz) 32GB Total. (Two DIMMs)
CPU - Intel i9 9900K (OC to 5.2Ghz)
PSU - EVGA G3 1000w
GPU - Kingpin 2080 ti (OC to 2130Mhz, 8450mhz memory) with Hydro Copper.
Vertical GPU Cable - Termaltake Platinum 300mm 16x cable
Watercooling - Mo-Ra3 Pro420 external rad (stainless), dual D5 EK pumps, Heatkiller 200mm res, Heatkiller IV cpu block, Mayhem tube 16/10, Alphacool fittings, 9x140mm Noctua 2000rpm PMW fans, Koolance QD3 Quick release fittings, Mayhem UV premix.
Monitor - EIZO CG319X
Checked out your build thread, very nice!!!! I like how a $10,000+ system has problems with RDR2. Lulz.
post edited by kevinc313 - 2019/11/10 18:36:06
|
Tris1066
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2016/06/16 01:58:15
- Status: offline
- Ribbons : 0
Re: 2080 TI RDR2 glitches in 4K?
2019/11/10 22:17:25
(permalink)
Narrowed down the flickering issue to the game's vsync option, turning it off gets rid of the flicker, but then you're stuck with variable fps and screen tearing. Oddly, for me, turning vsync off and then back on temporarily solves the issue, at least until I next restart the game.
post edited by Tris1066 - 2019/11/10 22:19:58
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 03:13:58
(permalink)
I cant wait to get my hands on this freaking broken game! Lol
Someone buy something from me in the market place so I can grab it!
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 07:12:12
(permalink)
Interesting, I couldn't play without V-sync it would look terrible.
Can I ask is it normal for the GPU to run at 1350mhz when not in game, it only lifts upto full speed when under load?
|
Tris1066
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2016/06/16 01:58:15
- Status: offline
- Ribbons : 0
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 08:13:03
(permalink)
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 08:16:52
(permalink)
I really need to learn how to OC this, lol, I have it at +900mem and +2160mhz, but thats about it without it going crazy, I see loads of people getting 2250mhz and stuff so maybe my card is mid range spec :D
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 08:42:10
(permalink)
superclarkey
My gpu is getting to around 35-36deg max, memory is warmer on the left side of the card by a few degrees, could be a bad mount on water block cause this?
That's normal. Everyone's mem1 is much higher then anything else.. not even sure where that sensor is on the board compared to the pic but assuming in a warm area where there is no water flow. Been the same per the ftw3 ultra on a hydro block and then kingpin. Might be the same on the 1080ti ftw3 as well.. would have to check past pics.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 08:45:00
(permalink)
superclarkey
I really need to learn how to OC this, lol, I have it at +900mem and +2160mhz, but thats about it without it going crazy, I see loads of people getting 2250mhz and stuff so maybe my card is mid range spec :D
I think you mean 2205. Kind of the norm for a kingpin. Drop the memory back to normal specs and focus on GPU clock first.. raise the clock by like 15 ea attempt. First max out the power/temp and voltage. Always keep that like that. Best to use afterburner which you can easy on water cause you dont have to worry about controlling fans since ab can only control the GPU fan.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 09:17:37
(permalink)
@AHowes - I will try what you’ve said, I did kinda do this how I went about it, as it was the logical way of doing it. The water pumps run full load all the time, so no fans to control. The rad is that bit the fans run min speed constantly and never gets a degree hotter lol its the definition of overkill :-) https://forums.evga.com/m/tm.aspx?m=2989144Page two the rad lol
post edited by superclarkey - 2019/11/11 09:20:26
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 10:18:04
(permalink)
Nice clean first build! Here is my latest I did back in the summer https://imgur.com/a/nsYxIJxIt's a modified thermaltake P7. Has 2x Ek 360 XE, 2x 460 XE radiators with push pull corsair SP120 HP fans at max and a single 520 corsair rad with push corsair ML140 fans in push to allow room for mounting drives. Dual EK D5 pumps x 2. Water temps low 21-22c and card idles at 25c and seems to run max at 32-33c in 68-72f basement. System layed dormant for many months and excited to get back to it and push it some more.
post edited by AHowes - 2019/11/11 10:25:24
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 11:55:40
(permalink)
Amazing builds gentlemen. I should make one for mine but it's been upgraded at different times. If I have time I'll create one. @AHowes, amazing build but my OCD is going off for the fact that your fans aren't all straight. 
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 12:26:36
(permalink)
GTXJackBauer
Amazing builds gentlemen. I should make one for mine but it's been upgraded at different times. If I have time I'll create one.
@AHowes, amazing build but my OCD is going off for the fact that your fans aren't all straight.
Lol! I was all like what? Yeah what can ya do. I had to rotate them so the fan cables would just reach the fan controllers :) I was 2 adapters short and said screw it. Wasn't going to wait 2 days for Amazon to ship them.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
superclarkey
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2019/07/12 09:24:51
- Location: United Kingdom
- Status: offline
- Ribbons : 1
Re: 2080 TI RDR2 glitches in 4K?
2019/11/11 14:15:52
(permalink)
If your going to water cool, go big :-) lol. Nice set, I went for the practical and functional build, no frills lol
Even when I play for hours the water temp does’t rise much at all, maybe a degree if that, its very stable and fans are on 20% lowest they can Will go and can’t be heard so almost silent running.
I’m totally new to pc stuff, so had to do allot of research for the build, learnt allot.
The only issue I have is as I have never had another pc like this I don’t know if its fast or doing good numbers, just jumped in at the deep end.
For £4500 I think its allot of machine for the buck.
|